I think this would be to set standby instead of idle in the GUI
Hard Disk spindown
-
-
I think this would be to set standby instead of idle in the GUI
if i have not misunderstood what you mean, i set the hd to 128 (minimum power consumption without standby), but the disk was woken up anyway
-
I meant, executing this
smartctl --nocheck standby -i /dev/sdb
would be the same as this
I thought that is what you wanted to achieve with
is there any way to set the following parameters as above?
-
-
tried this too, the option that comes up is this:
but he wakes up anyway
-
You can run the command
smartctl --nocheck standby -i /dev/sdb
as scheduled job for each drive at reboot and see if it works.
-
Puoi eseguire il comando
[tt] smartctl --nocheck standby -i / dev / sdb [/ tt]
come lavoro pianificato per ogni unità al riavvio e vedere se funziona.
disabling all the options concerning the S.M.A.R.T. I still have the smartctl service that queries the disks and who knows which option ... I don't understand how it is possible that with everything disabled the service goes on.
-
Participate now!
Don’t have an account yet? Register yourself now and be a part of our community!