i have some confusion on how to get rid of an unwanted mounting so i am seeking some advice...
a bit more background:
the issue came about because when i built the system (replaced omv steoneburner) i did not have the hard disk i am referring to attached to the system. i attached this new 1Tb hard disk to be the subversion repository file system in my omv5 system.
I was manually remounting the file system as needed whilst i installed, configured & tested the svnserve service - i am using the svn protocol to access repositories using tortoiseSVN, and in process of trying to work out a reasonable way to setup the system, i tried using the Filesystem tool to mount the drive but for some reason the file system would not automount on restart (i probably missed a step somewhere as the Filesystem tab listing showed it as unreferenced) .
inevitably i added the file system to the fstab and have it mounting ok on bootup but of course there is the remembered mounting via OMV that i am having difficulty getting rid of.
full fstab is this:
/dev/disk/by-label/DATA /srv/dev-disk-by-label-DATA ext4 defaults,nofail,user_xattr,noexec,usrjquota=aquota.user,grpjquota=aquota.group,jqfmt=vfsv0,acl 0 2/dev/disk/by-id/ata-WDC_WD10EZEX-00BN5A0_WD-WCC3F7SH5ZHP-part2 /srv/dev-disk-by-id-ata-WDC_WD10EZEX-00BN5A0_WD-WCC3F7SH5ZHP-part2 ext4 defaults,nofail,user_xattr,usrjquota=aquota.user,grpjquota=aquota.group,jqfmt=vfsv0,acl 0 2
the second OMV section entry that begins with "/dev/disk/by-id/ata-WDC_WD10EZEX"
is the one i want to get rid of because it duplicates the mounting further up the fstab:
and i end up with two copies of the same file system mounted in two separate folders under /srv
the file system mounted to the folder svn matches this item in fstab UUID=99d41060-856b-4547-b6ac-cbf7431ed224 /srv/svn
the file system mounted to the folder "dev-disk-by-id-ata-WDC_WD10EZEX-00BN5A0_WD-WCC3F7SH5ZHP-part2" matches this item in fstab /dev/disk/by-id/ata-WDC_WD10EZEX-00BN5A0_WD-WCC3F7SH5ZHP-part2 /srv/dev-disk-by-id-ata-WDC_WD10EZEX-00BN5A0_WD-WCC3F7SH5ZHP-part2
the omv5 documentation suggests that i can get rid of this second one by editing the config.xml database (partial copy below) but i cant find an entry that matches to second mounting (see below)
any suggestions on where to look next ?