HDD MISSING IN FILE SYSTEM

  • Hellow

    I have setup a nas with omv.

    Using 2 tb 1 tb 5 tb hdd with external power supply adapter

    Everything was fine but when i shut it down and restart there is all hdd showing in filesystem is missing..

    Please suggest me to overcome this

  • Im not sure what the previous kernel would have to do with this, but I don't use the Pi's.


    Are you sure your external drives were powered on, and not asleep? Make sure they are powered on, then either via ssh or console, log in as root and type mount -a and see if they show as available in the gui after a refresh.

  • Im not sure what the previous kernel would have to do with this, but I don't use the Pi's.


    Are you sure your external drives were powered on, and not asleep? Make sure they are powered on, then either via ssh or console, log in as root and type mount -a and see if they show as available in the gui after a refresh.

    I wasn't aware it was a Pi. In my case, my raid card drivers are not loading on the most recent kernel, 5.8 but work fine on 5.7.

    OMV 5.x
    Supermicro X9DRH-7F
    2X-XEON E5-2660V2
    128GB PC3-10600R ECC REG
    Supermicro SATA DOM 64GB
    Areca ARC-1883IX-24
    24X - WD WD80EFZX
    NORCO RPC-4224 4U
    Eaton 5PX 1500

Participate now!

Don’t have an account yet? Register yourself now and be a part of our community!