nextcloud omv5

  • hi everyone to start i'm new here it's my second post here,


    so I expose my problem to you


    Basically I now have to install docker with portainre to install nextcloud so I have to install nextcloud everything works I have zero errors in the logs ect so until then there is no problem my worry is that I am not able to open the nextcloud web interface I don't know how to set the ports I think there are ports to be pre-defined for it to work? or other I think if you have an idea or the solution it will be nice thank you for reading


    the logs of nextcloud

    [s6-init] making user provided files available at /var/run/s6/etc...exited 0.,

    [s6-init] ensuring user provided files have correct perms...exited 0.,

    [fix-attrs.d] applying ownership & permissions fixes...,

    [fix-attrs.d] done.,

    [cont-init.d] executing container initialization scripts...,

    [cont-init.d] 01-envfile: executing... ,

    [cont-init.d] 01-envfile: exited 0.,

    [cont-init.d] 10-adduser: executing... ,

    ,

    -------------------------------------,

    _ (),

    | | ___ _ __,

    | | / __| | | / \ ,

    | | \__ \ | | | () |,

    |_| |___/ |_| \__/,

    ,

    ,

    Brought to you by linuxserver.io,

    -------------------------------------,

    ,

    To support LSIO projects visit:,

    https://www.linuxserver.io/donate/,

    -------------------------------------,

    GID/UID,

    -------------------------------------,

    ,

    User uid: 1000,

    User gid: 1000,

    -------------------------------------,

    ,

    [cont-init.d] 10-adduser: exited 0.,

    [cont-init.d] 20-config: executing... ,

    [cont-init.d] 20-config: exited 0.,

    [cont-init.d] 30-keygen: executing... ,

    generating self-signed keys in /config/keys, you can replace these with your own keys if required,

    Generating a RSA private key,

    ...............................................+++++,

    ...........+++++,

    writing new private key to '/config/keys/cert.key',

    -----,

    [cont-init.d] 30-keygen: exited 0.,

    [cont-init.d] 40-config: executing... ,

    [cont-init.d] 40-config: exited 0.,

    [cont-init.d] 50-install: executing... ,

    [cont-init.d] 50-install: exited 0.,

    [cont-init.d] 60-memcache: executing... ,

    [cont-init.d] 60-memcache: exited 0.,

    [cont-init.d] 70-aliases: executing... ,

    [cont-init.d] 70-aliases: exited 0.,

    [cont-init.d] 99-custom-files: executing... ,

    [custom-init] no custom files found exiting...,

    [cont-init.d] 99-custom-files: exited 0.,

    [cont-init.d] done.,

    [services.d] starting services,

    [services.d] done.,

    Images

    • nextcloud11.PNG
  • How did you setup the container?

    Maybe it would help if you post screenshots of your settings in Portainer or the docker-compose file you used (if you used this route).


    As you are running OMV on the same server as Nextcloud in docker you have to make sure that the ports they are using are not conflicting. Your screen shot does not show a lot, but I guess you can reach nextcloud via

    ip.of.you.server:8443

    e.g.

    192.168.0.5:8443



    This might give a hint as well:

    [How-To] Nextcloud with Letsencrypt using OMV and docker-compose

  • hello I will show you some screen I have setup nextcloud via https://blog.linuxserver.io/20…rypt-nginx-starter-guide/ I just copy the code I show you with the screens here below











  • Just tried in a Virtual Machine. You should be able to access nextcloud with

    https://ip.of.you.server:8443

    e.g.

    https://192.168.0.5:8443


    As you probably don't have a certificate for that page/server, the browser will show a warning or might even refuse to connect.

    Firefox and Brave work in my case, after I confirmed to accept the risk.


    Be aware that with your configuration the config and data folder are created on / which is not recommended. You should place them on a different drive or at least filesystem to avoid problems with a full root filesystem in future.


    Also use UGID=100.

  • If it is not working, check the log file of the container (picture below). It should show this:


  • If it is not working, check the log file of the container (picture below). It should show this:


    hello sir it work white firefox ;-;

    and i edit the UGID=100.


    and what's the configuration to do at the start?

  • If it is not working, check the log file of the container (picture below). It should show this:


    if you have a video to advise me for well configured nextcloud it will be nice

  • I looked a little why does next cloud store my files on my ssd instead of my raid5?

    Because you set it up like this

    Be aware that with your configuration the config and data folder are created on / which is not recommended. You should place them on a different drive or at least filesystem to avoid problems with a full root filesystem in future.

  • The volume section of your docker compose file should be something like this


    Code
    volumes:
    - /srv/dev-disk-by-label-disk1/appdata/nextcloud/config:/config #/srv/dev-disk-by-label-disk1 needs to be adjusted
    - /srv/dev-disk-by-label-disk1/appdata/nextcloud/data:/data #/srv/dev-disk-by-label-disk1 needs to be adjusted

    You need to replace "disk1" by the label of your filesystem.

  • The volume section of your docker compose file should be something like this


    Code
    volumes:
    - /srv/dev-disk-by-label-disk1/appdata/nextcloud/config:/config #/srv/dev-disk-by-label-disk1 needs to be adjusted
    - /srv/dev-disk-by-label-disk1/appdata/nextcloud/data:/data #/srv/dev-disk-by-label-disk1 needs to be adjusted

    You need to replace "disk1" by the label of your filesystem.

    do I have to do something with the / data or not?

  • it work so


    so it will store on the raid5 now?

    How do I have access from my nextcloud outside my home?

  • You have a very minimal installation without ssl. So I guess it does not matter.

    You can try this fix

    RE: [How-To] Nextcloud with Letsencrypt using OMV and docker-compose

    but it is for the case where you use swag or letsencrypt to get a certificate. You need to figure out where your ssl.conf is and if the mentioned line is in there.


    Regarding the database, I am not sure whether or when you will experience performance issues. If you want to seriously use Nextcloud I recommend to install the stack with Nextcloud, mariadb (as database)and - if you want to connect to your Nextcloud from the internet - swag (or letsencrypt).

  • hello i was looking at a video and the guy was saying that i need to add my domain here ''trusted domain''

Participate now!

Don’t have an account yet? Register yourself now and be a part of our community!