Error when activating SMB on freshly installed OMV 5

  • Hello,

    i just installed OMV5 on Raspi OS lite for the Pi4 4gb model.

    I wanted to activate SMB, but this is not possible because it drops an error:


    Code
    {"response":null,"error":{"code":0,"message":"The property 'localmaster' does not exist in the model 'conf.service.smb'.","trace":"OMV\\AssertException: The property 'localmaster' does not exist in the model 'conf.service.smb'. in \/usr\/share\/php\/openmediavault\/config\/configobject.inc:71\nStack trace:\n#0 \/usr\/share\/php\/openmediavault\/config\/configobject.inc(187): OMV\\Config\\ConfigObject->assertExists('localmaster')\n#1 \/usr\/share\/php\/openmediavault\/config\/configobject.inc(272): OMV\\Config\\ConfigObject->set('localmaster', true, true)\n#2 \/usr\/share\/php\/openmediavault\/config\/configobject.inc(234): OMV\\Config\\ConfigObject->setFlatAssoc(Array, true, false)\n#3 \/usr\/share\/openmediavault\/engined\/rpc\/smb.inc(81): OMV\\Config\\ConfigObject->setAssoc(Array)\n#4 [internal function]: Engined\\Rpc\\Smb->setSettings(Array, Array)\n#5 \/usr\/share\/php\/openmediavault\/rpc\/serviceabstract.inc(123): call_user_func_array(Array, Array)\n#6 \/usr\/share\/php\/openmediavault\/rpc\/rpc.inc(86): OMV\\Rpc\\ServiceAbstract->callMethod('setSettings', Array, Array)\n#7 \/usr\/sbin\/omv-engined(537): OMV\\Rpc\\Rpc::call('SMB', 'setSettings', Array, Array, 1)\n#8 {main}"}}



    I hope this can be fixed, should i open an issue within Github?

    Raspberry Pi 4 4GB -- 3x 2TB WD My Passport 2,5" in Raid 5

  • installed OMV5

    please elaborate on this a bit more.

    - guide used

    - image downloaded

    omv 6.9.6-2 (Shaitan) on RPi CM4/4GB with 64bit Kernel 6.1.21-v8+

    2x 6TB 3.5'' HDDs (CMR) formatted with ext4 via 2port PCIe SATA card with ASM1061R chipset providing hardware supported RAID1


    omv 6.9.3-1 (Shaitan) on RPi4/4GB with 32bit Kernel 5.10.63 and WittyPi 3 V2 RTC HAT

    2x 3TB 3.5'' HDDs (CMR) formatted with ext4 in Icy Box IB-RD3662-C31 / hardware supported RAID1

    For Read/Write performance of SMB shares hosted on this hardware see forum here

  • configuring RAID 5 (as your signature suggests) is not mentioned in this guide.

    omv 6.9.6-2 (Shaitan) on RPi CM4/4GB with 64bit Kernel 6.1.21-v8+

    2x 6TB 3.5'' HDDs (CMR) formatted with ext4 via 2port PCIe SATA card with ASM1061R chipset providing hardware supported RAID1


    omv 6.9.3-1 (Shaitan) on RPi4/4GB with 32bit Kernel 5.10.63 and WittyPi 3 V2 RTC HAT

    2x 3TB 3.5'' HDDs (CMR) formatted with ext4 in Icy Box IB-RD3662-C31 / hardware supported RAID1

    For Read/Write performance of SMB shares hosted on this hardware see forum here

  • configuring RAID 5 (as your signature suggests) is not mentioned in this guide.

    Of course this was not mentioned... the Raid existed before the installation and has nothing to do with such an error message...







    clear your browser cache

    Thank you, this worked :)

    Raspberry Pi 4 4GB -- 3x 2TB WD My Passport 2,5" in Raid 5

Jetzt mitmachen!

Sie haben noch kein Benutzerkonto auf unserer Seite? Registrieren Sie sich kostenlos und nehmen Sie an unserer Community teil!