RAID 5 ARRAY 5 x 4TB Seagate Iron Wolf degraded but SMART Status Green (Good)

  • OMV 4 RAID 5 array reports the file system as degraded but smart status of the "removed" drive is good. I replaced DEV/SDA 2 weeks ago and now SDB has been removed from the array. Is this a drive or controller error? The array has been operating for 3-4 years.


    Stumped...


    F. Fota


    Extended information for the removed drive (SDB) follows:


    Edited once, last by crashtest: Extended data move to a spoiler box. ().

  • That just confirms what I said above, it's either a sata cable and/or the port, you need to start by changing the cable, if that doesn't resolve it then move the drive to another port.

    Raid is not a backup! Would you go skydiving without a parachute?

  • Thanks for the assistance Geaves. I changed the cable and replaced the drive with a known good spare (same SATA port) and the array is now rebuilt and functional. I ran Seagate's Long Generic Test on the drive (ST4000VN008-2DR166, Firmware SC60) and it passed.


    Conclusion: Bad SATA cable. Issue resolved.


    For those investing in arrays of multidrive servers, could you recommend an SATA cable manufacturer? In the past, and with the server in question, I simple bought the cheapest cables I found at Amazon and took advantage of prime shipping. I guess you get what you pay for. I replaced the bad cable in this server with Benfei locking cables.


    fotafm:)

  • :thumbup:


    The sata cables I have are from old builds including the spares, I've had Ethernet cables fail and I've just swapped out with what I have.


    Just keep an eye on the crc errors as they will point to a hardware failure

    Raid is not a backup! Would you go skydiving without a parachute?

Participate now!

Don’t have an account yet? Register yourself now and be a part of our community!