New openmediavault-kvm plugin

    • Official Post

    I gave the wrong directory. /etc/libvirt/storage/autostart is what you want.

    omv 7.7.10-1 sandworm | 64 bit | 6.11 proxmox kernel

    plugins :: omvextrasorg 7.0.2 | kvm 7.1.8 | compose 7.6.10 | cterm 7.8.7 | cputemp 7.0.2 | mergerfs 7.0.5 | scripts 7.3.1


    omv-extras.org plugins source code and issue tracker - github - changelogs


    Please try ctrl-shift-R and read this before posting a question.

    Please put your OMV system details in your signature.
    Please don't PM for support... Too many PMs!

    Hi, I want to create a macos vm. I need to configure args to get this running:


    Code
    args: -device isa-applesmc,osk="..." -smbios type=2 -device usb-kbd,bus=ehci.0,port=2 -global nec-usb-xhci.msi=off -global ICH9-LPC.acpi-pci-hotplug-with-bridge-support=off -cpu host,vendor=GenuineIntel,+invtsc,+hypervisor,kvm=on,vmware-cpuid-freq=on

    Where can I do this?


    In proxmox its the following file: /etc/pve/qemu-server/YOUR-VM-ID-HERE.conf


    I am trying to accomplish the following proxmox howto with openmediavault-kvm: https://www.nicksherlock.com/2…os-13-ventura-on-proxmox/


    Thanks and regards Hoppel

    ----------------------------------------------------------------------------------
    openmediavault 6 | proxmox kernel | zfs | docker | kvm
    supermicro x11ssh-ctf | xeon E3-1240L-v5 | 64gb ecc | 8x10tb wd red | digital devices max s8
    ---------------------------------------------------------------------------------------------------------------------------------------

    Edited 3 times, last by hoppel118 ().

    • Official Post
    Quote from hoppel118

    Where can I do this?

    You should run my script. It takes the vm name as an input parameter but you might need to adjust some of the variables at the top of the script - https://github.com/ryecoaaron/scripts/blob/main/mac.sh

    omv 7.7.10-1 sandworm | 64 bit | 6.11 proxmox kernel

    plugins :: omvextrasorg 7.0.2 | kvm 7.1.8 | compose 7.6.10 | cterm 7.8.7 | cputemp 7.0.2 | mergerfs 7.0.5 | scripts 7.3.1


    omv-extras.org plugins source code and issue tracker - github - changelogs


    Please try ctrl-shift-R and read this before posting a question.

    Please put your OMV system details in your signature.
    Please don't PM for support... Too many PMs!

    Thanks 1
    Quote from ryecoaaron

    You should run my script. It takes the vm name as an input parameter but you might need to adjust some of the variables at the top of the script - https://github.com/ryecoaaron/scripts/blob/main/mac.sh

    Wow! Is there anything you don't have already done? :)


    Sadly the script didn't work:



    There are 2 error messages:


    Code
    Error: Error when defining a domain from .xml
Error: missing name information

    and there is also a warning:


    Code
    Warning: The home directory /run/uuidd you specified cannot be accessed: No such file or directory

    Any idea?


    Thanks Hoppel

    ----------------------------------------------------------------------------------
    openmediavault 6 | proxmox kernel | zfs | docker | kvm
    supermicro x11ssh-ctf | xeon E3-1240L-v5 | 64gb ecc | 8x10tb wd red | digital devices max s8
    ---------------------------------------------------------------------------------------------------------------------------------------

    Quote from ryecoaaron

    It takes the vm name as an input parameter but you might need to adjust some of the variables at the top of the script

    upps... I didn't read your message completely. How does input parameter thing work? Your script didn't as for me the vm name. 'Do I have to hard code it into your script?


    Thanks Hoppel

    ----------------------------------------------------------------------------------
    openmediavault 6 | proxmox kernel | zfs | docker | kvm
    supermicro x11ssh-ctf | xeon E3-1240L-v5 | 64gb ecc | 8x10tb wd red | digital devices max s8
    ---------------------------------------------------------------------------------------------------------------------------------------

    • Official Post
    Quote from hoppel118

    How does input parameter thing work?

    sudo ./mac.sh VMNAME

    omv 7.7.10-1 sandworm | 64 bit | 6.11 proxmox kernel

    plugins :: omvextrasorg 7.0.2 | kvm 7.1.8 | compose 7.6.10 | cterm 7.8.7 | cputemp 7.0.2 | mergerfs 7.0.5 | scripts 7.3.1


    omv-extras.org plugins source code and issue tracker - github - changelogs


    Please try ctrl-shift-R and read this before posting a question.

    Please put your OMV system details in your signature.
    Please don't PM for support... Too many PMs!

    Quote from ryecoaaron

    sudo ./mac.sh VMNAME

    OK, that looks better:


    What do think about these two messages:


    Code
    qemu: module block-block-dmg-bz2 not found, do you want to install qemu-block-extra package?
qemu: module block-block-dmg-lzfse not found, do you want to install qemu-block-extra package?

    qemu-block-extra is already the latest package:

    Code
    apt install qemu-block-extra
Paketlisten werden gelesen… Fertig
Abhängigkeitsbaum wird aufgebaut… Fertig
Statusinformationen werden eingelesen… Fertig
qemu-block-extra ist schon die neueste Version (1:5.2+dfsg-11+deb11u2).
0 aktualisiert, 0 neu installiert, 0 zu entfernen und 4 nicht aktualisiert.


    So I tried to start the new macos vm and saw the following red message block:


    Code
    500 - Internal Server Error
Unable to - poweronKonnte Schnittstellen-MTU auf 'virbr0' nicht erhalten: Kein passendes Gerät gefunden


    After removing the network interface and adding my own network bridge, I see the macos setup guide. ^^


    You are my hero of the day! :)


    So, it installs big-sur. but I would like to install ventura.

    Code
    1. High Sierra (10.13)
2. Mojave (10.14)
3. Catalina (10.15)
4. Big Sur (11.7) - RECOMMENDED
5. Monterey (12.6)
6. Ventura (13)
Big Sur (11.7) - RECOMMENDED

    What do you think about ventura with kvm? Why is big-sur recommended?


    EDIT: I changed the variable from svers="big-sur" to svers="ventura" and now try my luck. But I am still interested in your opinion for Ventura in KVM. ;)


    EDIT 2: Ventura doesn't work:


    Any idea?


    EDIT 3: OK, my server doesn't support AVX2.0 natively. Maybe its solvable with this fix:


    GitHub - acidanthera/CryptexFixup: Various patches to install Rosetta Cryptex
    Various patches to install Rosetta Cryptex. Contribute to acidanthera/CryptexFixup development by creating an account on GitHub.
    github.com


    I am unsure...


    Next try "monterey". Looks better:



    OK, had to activate a macvtap network. Until now I only used omv network bridges with my vms. macOS doesn't recognize these omv bridges. macvtap to to omv bridge works.


    Now, it needs two hours:




    Thank you so much!


    Hoppel

    ----------------------------------------------------------------------------------
    openmediavault 6 | proxmox kernel | zfs | docker | kvm
    supermicro x11ssh-ctf | xeon E3-1240L-v5 | 64gb ecc | 8x10tb wd red | digital devices max s8
    ---------------------------------------------------------------------------------------------------------------------------------------

    Edited 5 times, last by hoppel118 ().

    • Official Post

    Yep, it is called hackintosh for a reason : ) The repo that does all of the work recommends big sur.

    omv 7.7.10-1 sandworm | 64 bit | 6.11 proxmox kernel

    plugins :: omvextrasorg 7.0.2 | kvm 7.1.8 | compose 7.6.10 | cterm 7.8.7 | cputemp 7.0.2 | mergerfs 7.0.5 | scripts 7.3.1


    omv-extras.org plugins source code and issue tracker - github - changelogs


    Please try ctrl-shift-R and read this before posting a question.

    Please put your OMV system details in your signature.
    Please don't PM for support... Too many PMs!

    Thanks 1

    At some point in time it stopped working. I had to remove the plugin from the command line. There is a lot of rubbish left. How to clean?



    7.0-22 (Sandworm)| Kernel 6.1.0-17 ... running on

    Supermicro A1SRi -- Intel® Atom processor C2758 8x 2,40 GHz -- 32 GB DDR3 RAM -- OMV installed to NE-512

    • Official Post
    Quote from AHTOH

    At some point in time it stopped working. I had to remove the plugin from the command line. There is a lot of rubbish left. How to clean?

    Other than the lxc bridge, all I see is your docker "rubbish".

    omv 7.7.10-1 sandworm | 64 bit | 6.11 proxmox kernel

    plugins :: omvextrasorg 7.0.2 | kvm 7.1.8 | compose 7.6.10 | cterm 7.8.7 | cputemp 7.0.2 | mergerfs 7.0.5 | scripts 7.3.1


    omv-extras.org plugins source code and issue tracker - github - changelogs


    Please try ctrl-shift-R and read this before posting a question.

    Please put your OMV system details in your signature.
    Please don't PM for support... Too many PMs!

    • Official Post
    Quote from fbeye

    For fun I have been following along, all gets to the Install portion, but says I do not have access to the disk to install?

    Not an expert on installing OS X (especially when not using big sur) on kvm. So, not sure.

    omv 7.7.10-1 sandworm | 64 bit | 6.11 proxmox kernel

    plugins :: omvextrasorg 7.0.2 | kvm 7.1.8 | compose 7.6.10 | cterm 7.8.7 | cputemp 7.0.2 | mergerfs 7.0.5 | scripts 7.3.1


    omv-extras.org plugins source code and issue tracker - github - changelogs


    Please try ctrl-shift-R and read this before posting a question.

    Please put your OMV system details in your signature.
    Please don't PM for support... Too many PMs!

    • Official Post
    Quote from fbeye

    I did sudo ./mac.sh VMNAME using the script!! and all defaults

    Why is that bad? Delete the VM in the plugin and then sudo rm -rfv /srv/ssd2/mac.

    omv 7.7.10-1 sandworm | 64 bit | 6.11 proxmox kernel

    plugins :: omvextrasorg 7.0.2 | kvm 7.1.8 | compose 7.6.10 | cterm 7.8.7 | cputemp 7.0.2 | mergerfs 7.0.5 | scripts 7.3.1


    omv-extras.org plugins source code and issue tracker - github - changelogs


    Please try ctrl-shift-R and read this before posting a question.

    Please put your OMV system details in your signature.
    Please don't PM for support... Too many PMs!

    I mean, I did the defaults but I modified to my specific system and drive location. I just meant after changing to my specifics in the .sh file, I ran the command and it installed the VM, but when I run the VM and go through the installation of thew OS, says I do not have access to the drive, read/write I assume.

    Unless I am misunderstanding you.

    • Official Post
    Quote from fbeye

    I mean, I did the defaults but I modified to my specific system and drive location. I just meant after changing to my specifics in the .sh file, I ran the command and it installed the VM, but when I run the VM and go through the installation of thew OS, says I do not have access to the drive, read/write I assume.

    Unless I am misunderstanding you.

    I misunderstood what you mean by defaults. And I was confusing you and hoppel.


    As for why it doesn't work, I'm not really able to help. The script is just running the code from kholia/OSX-KVM. It used to work but I haven't used it a long time. And I don't know mac os well enough to build this into the plugin. Hence why it is still a script in my personal repo.

    omv 7.7.10-1 sandworm | 64 bit | 6.11 proxmox kernel

    plugins :: omvextrasorg 7.0.2 | kvm 7.1.8 | compose 7.6.10 | cterm 7.8.7 | cputemp 7.0.2 | mergerfs 7.0.5 | scripts 7.3.1


    omv-extras.org plugins source code and issue tracker - github - changelogs


    Please try ctrl-shift-R and read this before posting a question.

    Please put your OMV system details in your signature.
    Please don't PM for support... Too many PMs!

Participate now!

Don’t have an account yet? Register yourself now and be a part of our community!

Register Yourself Login