I have the following configuration under /etc/smartd.conf:
# This file is auto-generated by openmediavault (https://www.openmediavault.org)
# WARNING: Do not edit this file, your changes will get lost.
DEFAULT -a -o on -S on -T permissive -W 0,50,55 -n standby,q
/dev/disk/by-id/nvme-WDC_PC_SN520_abc -d nvme \
-m server@recipient.com -M exec /usr/share/smartmontools/smartd-runner
/dev/disk/by-id/ata-ST8000DM004-2CX188_ABC \
-s (S/../01/./15) \
-m server@recipient.com -M exec /usr/share/smartmontools/smartd-runner
/dev/disk/by-id/ata-ST8000DM004-2CX188_XYZ \
-s (S/../01/./15) \
-m server@recipient.com -M exec /usr/share/smartmontools/smartd-runner
This has the temperature thresholds set at 50°C and 55°C, respectively. However, the SSD runs hotter and according to the spec it is allowed to go as high as 85°C. Is there a way to set temperatures for each drive individually?