Raspberry "dtoverlay=gpio-shutdown" (on/off switch) feature vanished after omv installation

  • Hello !


    On a Rasperry PI there is an option to attach a pushbotton on the GPIO3 pins and this gives a start/stop switch to the Pi. Before the installation of omv this feature did work fine - it´s activated in the /boot/config.txt (dtoverlay=gpio-shutdown)

    AFTER the plain installation of omv (wget -O - https://github.com/OpenMediaVault....) this feature does not work any more for shutdown. To me it seems that omv disables all GPIO...

    A start of a PI by closing the GPIO does work, so the general configuration/functionality seems to be OK....

    I did test it with a plain Rasberian (buster) + current updates on a Raspberry PI 3 B+ v1,2 . omv 5.6.2.-1

    Needless to say omv itself works without any problems.


    Any hints would be fine


    Greetings from Graz

    Reini

  • crashtest

    Approved the thread.
  • Reini8020

    Changed the title of the thread from “Raspberry "dtoverlay=gpio-shutdown" feature vanished after omv installation” to “Raspberry "dtoverlay=gpio-shutdown" (on/off switch) feature vanished after omv installation”.

Participate now!

Don’t have an account yet? Register yourself now and be a part of our community!