omv-extras plugins - porting progress to OMV 6.x (done)

  • Is the sharerootfs plugin needed for any of the other plugins (other than snapraid)?

    The developer, kvm, snapraid, symlinks, and tgt plugins all use it.

    omv 6.0.41-1 Shaitan | 64 bit | 5.19 proxmox kernel | plugins :: omvextrasorg 6.1.1 | kvm 6.1.23 | mergerfs 6.3.3 | zfs 6.0.11
    omv-extras.org plugins source code and issue tracker - github


    Please try ctrl-shift-R and read this before posting a question.
    Please don't PM for support... Too many PMs!

  • Here is the current status of porting omv-extras plugins to OMV 6.x. If the plugin isn't on the list, it won't be ported.

    Whoah ... JellyFin's just gone now? :(

    (later edit) this may be a dumb question cause I'm new. But I could have sworn there was a openmediavault-jellyfin plugin at one point, only now I can't find it anymore.

  • JellyFin's just gone now?

    JellyFin has never been a plugin. Docker is the right road for that.

    omv 6.0.41-1 Shaitan | 64 bit | 5.19 proxmox kernel | plugins :: omvextrasorg 6.1.1 | kvm 6.1.23 | mergerfs 6.3.3 | zfs 6.0.11
    omv-extras.org plugins source code and issue tracker - github


    Please try ctrl-shift-R and read this before posting a question.
    Please don't PM for support... Too many PMs!

  • JellyFin has never been a plugin. Docker is the right road for that.

    OK thanks. I could have sworn I saw a "openmediavault-jellyfin" plugin that was a one-click install at one point but that's OK, I'll figure out the Docker install. Thanks. :)

  • could have sworn I saw a "openmediavault-jellyfin" plugin that was a one-click install at one poin

    plex and emby had a plugin at one time but I've never seen a jellyfin plugin. With a good docker-compose file for jellyfin, it should be just as easy as a plugin.

    omv 6.0.41-1 Shaitan | 64 bit | 5.19 proxmox kernel | plugins :: omvextrasorg 6.1.1 | kvm 6.1.23 | mergerfs 6.3.3 | zfs 6.0.11
    omv-extras.org plugins source code and issue tracker - github


    Please try ctrl-shift-R and read this before posting a question.
    Please don't PM for support... Too many PMs!

  • OMV4 on ProLiant N54L + 5 x 3.5'' WD/Seagate HDs

    OMV5 on Raspberry Pi4

  • Is there a LUKS plugin for OMV6 for Raspberry4?

    I installed omv6 but cannot find the LUKS Plugin

    Yes. Is omv-extras installed?

    omv 6.0.41-1 Shaitan | 64 bit | 5.19 proxmox kernel | plugins :: omvextrasorg 6.1.1 | kvm 6.1.23 | mergerfs 6.3.3 | zfs 6.0.11
    omv-extras.org plugins source code and issue tracker - github


    Please try ctrl-shift-R and read this before posting a question.
    Please don't PM for support... Too many PMs!

  • I have done a new fresh install and now LUKS is there.

    You reinstalled because of this? I'm sure it would've been easy to fix. I would've just clicked on apt clean in omv-extras.

    omv 6.0.41-1 Shaitan | 64 bit | 5.19 proxmox kernel | plugins :: omvextrasorg 6.1.1 | kvm 6.1.23 | mergerfs 6.3.3 | zfs 6.0.11
    omv-extras.org plugins source code and issue tracker - github


    Please try ctrl-shift-R and read this before posting a question.
    Please don't PM for support... Too many PMs!

  • Trust me I tried everything. There was no LUKS.

    Anyway, I have now upgraded from OMV5 to OMV6 but am struggling to get Docker to run.

    What I did so far:

    1) Installed OMV6 on a fresh SD Card, unlocked all LUKS drives and re-created my MergerFS pool.

    2) changed Docker instal directory in OMV Gui to point to my hd with pre-existing Docker folder (my old Docker installation).

    3) Ran Docker install from OMV GUI

    Status now says installed and not running

    When I run Docker I always get an error message 500 - internal server error.


    Any ideas how to get Docker up on OMV6?

    OMV4 on ProLiant N54L + 5 x 3.5'' WD/Seagate HDs

    OMV5 on Raspberry Pi4

  • Any ideas how to get Docker up on OMV6?

    what is the output of:

    sudo systemctl status docker

    sudo journalctl -u docker

    omv 6.0.41-1 Shaitan | 64 bit | 5.19 proxmox kernel | plugins :: omvextrasorg 6.1.1 | kvm 6.1.23 | mergerfs 6.3.3 | zfs 6.0.11
    omv-extras.org plugins source code and issue tracker - github


    Please try ctrl-shift-R and read this before posting a question.
    Please don't PM for support... Too many PMs!

  • docker.service - Docker Application Container Engine

    Loaded: loaded (/lib/systemd/system/docker.service; enabled; vendor preset: enabled)

    Drop-In: /etc/systemd/system/docker.service.d

    └─waitAllMounts.conf

    Active: failed (Result: exit-code) since Sat 2022-08-06 20:01:28 BST; 10min ago

    TriggeredBy: ● docker.socket

    Docs: https://docs.docker.com

    Process: 9965 ExecStart=/usr/bin/dockerd -H fd:// --containerd=/run/containerd/containerd.sock (code=exited, status=1>

    Main PID: 9965 (code=exited, status=1/FAILURE)

    CPU: 231ms


    Aug 06 20:01:28 raspberrypi systemd[1]: Stopped Docker Application Container Engine.

    Aug 06 20:01:28 raspberrypi systemd[1]: docker.service: Start request repeated too quickly.

    Aug 06 20:01:28 raspberrypi systemd[1]: docker.service: Failed with result 'exit-code'.

    Aug 06 20:01:28 raspberrypi systemd[1]: Failed to start Docker Application Container Engine.

    Aug 06 20:01:36 raspberrypi systemd[1]: docker.service: Start request repeated too quickly.

    Aug 06 20:01:36 raspberrypi systemd[1]: docker.service: Failed with result 'exit-code'.

    Aug 06 20:01:36 raspberrypi systemd[1]: Failed to start Docker Application Container Engine.



    =============================

    root@raspberrypi:~# sudo journalctl -u docker

    -- Journal begins at Mon 2022-04-04 15:41:41 BST, ends at Sat 2022-08-06 20:13:16 BST. --

    Aug 06 19:41:37 raspberrypi systemd[1]: Starting Docker Application Container Engine...

    Aug 06 19:41:39 raspberrypi dockerd[1833]: time="2022-08-06T19:41:39.599325728+01:00" level=info msg="Starting up"

    Aug 06 19:41:39 raspberrypi dockerd[1833]: mkdir /srv/JPool/Docker: read-only file system

    Aug 06 19:41:39 raspberrypi systemd[1]: docker.service: Main process exited, code=exited, status=1/FAILURE

    Aug 06 19:41:39 raspberrypi systemd[1]: docker.service: Failed with result 'exit-code'.

    Aug 06 19:41:39 raspberrypi systemd[1]: Failed to start Docker Application Container Engine.

    Aug 06 19:41:41 raspberrypi systemd[1]: docker.service: Scheduled restart job, restart counter is at 1.

    Aug 06 19:41:41 raspberrypi systemd[1]: Stopped Docker Application Container Engine.

    Aug 06 19:41:41 raspberrypi systemd[1]: Starting Docker Application Container Engine...

    Aug 06 19:41:41 raspberrypi dockerd[2193]: time="2022-08-06T19:41:41.928587514+01:00" level=info msg="Starting up"

    Aug 06 19:41:41 raspberrypi dockerd[2193]: mkdir /srv/JPool/Docker: read-only file system

    Aug 06 19:41:41 raspberrypi systemd[1]: docker.service: Main process exited, code=exited, status=1/FAILURE

    Aug 06 19:41:41 raspberrypi systemd[1]: docker.service: Failed with result 'exit-code'.

    Aug 06 19:41:41 raspberrypi systemd[1]: Failed to start Docker Application Container Engine.

    Aug 06 19:41:43 raspberrypi systemd[1]: docker.service: Scheduled restart job, restart counter is at 2.

    Aug 06 19:41:43 raspberrypi systemd[1]: Stopped Docker Application Container Engine.

    Aug 06 19:41:43 raspberrypi systemd[1]: Starting Docker Application Container Engine...

    Aug 06 19:41:44 raspberrypi dockerd[2270]: time="2022-08-06T19:41:44.156483886+01:00" level=info msg="Starting up"

    Aug 06 19:41:44 raspberrypi dockerd[2270]: mkdir /srv/JPool/Docker: read-only file system

    Aug 06 19:41:44 raspberrypi systemd[1]: docker.service: Main process exited, code=exited, status=1/FAILURE

    Aug 06 19:41:44 raspberrypi systemd[1]: docker.service: Failed with result 'exit-code'.

    Aug 06 19:41:44 raspberrypi systemd[1]: Failed to start Docker Application Container Engine.

    Aug 06 19:41:46 raspberrypi systemd[1]: docker.service: Scheduled restart job, restart counter is at 3.

    Aug 06 19:41:46 raspberrypi systemd[1]: Stopped Docker Application Container Engine.

    Aug 06 19:41:46 raspberrypi systemd[1]: docker.service: Start request repeated too quickly.

    Aug 06 19:41:46 raspberrypi systemd[1]: docker.service: Failed with result 'exit-code'.

    Aug 06 19:41:46 raspberrypi systemd[1]: Failed to start Docker Application Container Engine.

    Aug 06 19:45:19 raspberrypi systemd[1]: Starting Docker Application Container Engine...

    Aug 06 19:45:19 raspberrypi dockerd[4524]: time="2022-08-06T19:45:19.802592450+01:00" level=info msg="Starting up"

    Aug 06 19:45:19 raspberrypi dockerd[4524]: time="2022-08-06T19:45:19.917197109+01:00" level=info msg="parsed scheme: \"un>

    Aug 06 19:45:19 raspberrypi dockerd[4524]: time="2022-08-06T19:45:19.917800525+01:00" level=info msg="scheme \"unix\" not>

    Aug 06 19:45:19 raspberrypi dockerd[4524]: time="2022-08-06T19:45:19.918126057+01:00" level=info msg="ccResolverWrapper: >

    Aug 06 19:45:19 raspberrypi dockerd[4524]: time="2022-08-06T19:45:19.918490051+01:00" level=info msg="ClientConn switchin>

    lines 1-34

    OMV4 on ProLiant N54L + 5 x 3.5'' WD/Seagate HDs

    OMV5 on Raspberry Pi4

  • /srv/JPool/Docker: read-only file system

    Here is your problem.

    omv 6.0.41-1 Shaitan | 64 bit | 5.19 proxmox kernel | plugins :: omvextrasorg 6.1.1 | kvm 6.1.23 | mergerfs 6.3.3 | zfs 6.0.11
    omv-extras.org plugins source code and issue tracker - github


    Please try ctrl-shift-R and read this before posting a question.
    Please don't PM for support... Too many PMs!

  • ok I think this could be a permissions issue. The Docker folder only allows root to rw but I though OMV has root permissions anyway.

    OMV4 on ProLiant N54L + 5 x 3.5'' WD/Seagate HDs

    OMV5 on Raspberry Pi4

  • Thats strange. I dont have my Docker folder as a sharedfolder. Did you manually add that or did the installation create it?

    OMV4 on ProLiant N54L + 5 x 3.5'' WD/Seagate HDs

    OMV5 on Raspberry Pi4

Participate now!

Don’t have an account yet? Register yourself now and be a part of our community!