Testing omv6 - omv-extras "installing" but not in GUI menu

  • I have installed omv6 alpha with the 6.0-16 iso on an x-86 machine, and that went well. When I ran the wget script to install omv-extras, the following lines show up about half way through the install print out:

    Code
    dpkg: warning: 'ldconfig' not found in PATH or not executable
    dpkg: warning: 'start-stop-daemon' not found in PATH or not executable
    dpkg: error: 2 expected programs not found in PATH or not executable
    Note: root's PATH should usually contain /usr/local/sbin, /usr/sbin and /sbi

    The script concludes with Reading package lists... Done yet omv-extras is still not in the GUI menu. Is it possible to fix this or should I fresh install? Nothing is at stake here so I can install again, I would just like to know what happened, and how to fix it.


    I have already successfully installed omv 6, including omv-extras on VirtualBox

    Easy data backup: In a Scheduled Job: rsync -av --delete /srv/dev-disk-by-label-SOURCE/ /srv/dev-disk-by-label-DESTINATION/ (HT: Getting Started with OMV5)
    OMV 5 (current) - Thinkserver TS140, Nextcloud, Plex, Airsonic, Navidrome, Ubooquity, Digikam, Wetty, & Heimdall - NanoPi M4 (v.1): backups using Rsync and Rsnapshot - Odroid XU4 (Using DietPi): PiHole - hc2, xu4, Pi 3B+, Odroid H2, and VirtualBox: Testing and playing - Mac user converting to Linux, Debian 10 KDE.

  • omv-extras is still not in the GUI menu. Is it possible to fix this or should I fresh install?

    When you install from the command line, nothing refreshes your browser cache. Does ctrl-shift-R fix it? No reason to install fresh. If that doesn't work, do you see it in private or incognito mode?

    omv 5.6.13 usul | 64 bit | 5.11 proxmox kernel | omvextrasorg 5.6.2 | kvm plugin 5.1.6
    omv-extras.org plugins source code and issue tracker - github


    Please read this before posting a question.
    Please don't PM for support... Too many PMs!

  • None of those fixes it. I tried Brave, Firefox and Chrome in incognito.

    Easy data backup: In a Scheduled Job: rsync -av --delete /srv/dev-disk-by-label-SOURCE/ /srv/dev-disk-by-label-DESTINATION/ (HT: Getting Started with OMV5)
    OMV 5 (current) - Thinkserver TS140, Nextcloud, Plex, Airsonic, Navidrome, Ubooquity, Digikam, Wetty, & Heimdall - NanoPi M4 (v.1): backups using Rsync and Rsnapshot - Odroid XU4 (Using DietPi): PiHole - hc2, xu4, Pi 3B+, Odroid H2, and VirtualBox: Testing and playing - Mac user converting to Linux, Debian 10 KDE.

  • What is the output of: dpkg -l | grep openme


    Also, try running:


    sudo omv-mkworkbench all

    sudo /usr/bin/salt-call --local saltutil.clear_cache

    sudo omv-salt stage run prepare

    omv 5.6.13 usul | 64 bit | 5.11 proxmox kernel | omvextrasorg 5.6.2 | kvm plugin 5.1.6
    omv-extras.org plugins source code and issue tracker - github


    Please read this before posting a question.
    Please don't PM for support... Too many PMs!

  • Code
    dpkg -l | grep openme
    ii openmediavault 6.0-20 all openmediavault - The open network attached storage solution
    ii openmediavault-keyring 1.0 all GnuPG archive keys of the OpenMediaVault archive

    Easy data backup: In a Scheduled Job: rsync -av --delete /srv/dev-disk-by-label-SOURCE/ /srv/dev-disk-by-label-DESTINATION/ (HT: Getting Started with OMV5)
    OMV 5 (current) - Thinkserver TS140, Nextcloud, Plex, Airsonic, Navidrome, Ubooquity, Digikam, Wetty, & Heimdall - NanoPi M4 (v.1): backups using Rsync and Rsnapshot - Odroid XU4 (Using DietPi): PiHole - hc2, xu4, Pi 3B+, Odroid H2, and VirtualBox: Testing and playing - Mac user converting to Linux, Debian 10 KDE.

  • Did those changes make a difference? I would ctrl-shift-R again.

    omv 5.6.13 usul | 64 bit | 5.11 proxmox kernel | omvextrasorg 5.6.2 | kvm plugin 5.1.6
    omv-extras.org plugins source code and issue tracker - github


    Please read this before posting a question.
    Please don't PM for support... Too many PMs!

  • No, still missing. Cleared Browser cache.

    Easy data backup: In a Scheduled Job: rsync -av --delete /srv/dev-disk-by-label-SOURCE/ /srv/dev-disk-by-label-DESTINATION/ (HT: Getting Started with OMV5)
    OMV 5 (current) - Thinkserver TS140, Nextcloud, Plex, Airsonic, Navidrome, Ubooquity, Digikam, Wetty, & Heimdall - NanoPi M4 (v.1): backups using Rsync and Rsnapshot - Odroid XU4 (Using DietPi): PiHole - hc2, xu4, Pi 3B+, Odroid H2, and VirtualBox: Testing and playing - Mac user converting to Linux, Debian 10 KDE.

  • Hmm.. far out there chance.. Is it possible you actually clicked it and hit your adblocker? I've done similar before on other websites?


    If you're using any ad blockers, etc... pause them or make sure the webUI is relisted, then refresh and see if that helps

    Air Conditioners are a lot like PC's... They work great until you open Windows.


  • I guess I needed to look at the output of dpkg -l again. omv-extras isn't even partially installed. I would run the install script again and post all of its output.

    omv 5.6.13 usul | 64 bit | 5.11 proxmox kernel | omvextrasorg 5.6.2 | kvm plugin 5.1.6
    omv-extras.org plugins source code and issue tracker - github


    Please read this before posting a question.
    Please don't PM for support... Too many PMs!

  • Code
    root@h2:~# dpkg -l | grep openme
    ii openmediavault 6.0-20 all openmediavault - The open network attached storage solution
    ii openmediavault-keyring 1.0 all GnuPG archive keys of the OpenMediaVault archive

    Easy data backup: In a Scheduled Job: rsync -av --delete /srv/dev-disk-by-label-SOURCE/ /srv/dev-disk-by-label-DESTINATION/ (HT: Getting Started with OMV5)
    OMV 5 (current) - Thinkserver TS140, Nextcloud, Plex, Airsonic, Navidrome, Ubooquity, Digikam, Wetty, & Heimdall - NanoPi M4 (v.1): backups using Rsync and Rsnapshot - Odroid XU4 (Using DietPi): PiHole - hc2, xu4, Pi 3B+, Odroid H2, and VirtualBox: Testing and playing - Mac user converting to Linux, Debian 10 KDE.

  • Something is not right here. Are you logging in as root or sudo'ing to root? If the latter, how are you doing that? What is the output of: echo $PATH

    omv 5.6.13 usul | 64 bit | 5.11 proxmox kernel | omvextrasorg 5.6.2 | kvm plugin 5.1.6
    omv-extras.org plugins source code and issue tracker - github


    Please read this before posting a question.
    Please don't PM for support... Too many PMs!

  • I feel so stupid. Some recent posts I have read caused me to think I needed to disable root in SSH, so that was the first thing I did after up and running. So to run the command as root I have been using the su command. Obviously (now I see that) su is not the same as logging in as root.


    I just now

    • enabled root ssh login
    • logged in as root
    • ran the command

    omv-extras is installed and running fine. Now I am going to delete my account and create a new one named "StupidNoob". Maybe no one will make the connection. Sorry for the trouble, and thanks for your patience.

    Easy data backup: In a Scheduled Job: rsync -av --delete /srv/dev-disk-by-label-SOURCE/ /srv/dev-disk-by-label-DESTINATION/ (HT: Getting Started with OMV5)
    OMV 5 (current) - Thinkserver TS140, Nextcloud, Plex, Airsonic, Navidrome, Ubooquity, Digikam, Wetty, & Heimdall - NanoPi M4 (v.1): backups using Rsync and Rsnapshot - Odroid XU4 (Using DietPi): PiHole - hc2, xu4, Pi 3B+, Odroid H2, and VirtualBox: Testing and playing - Mac user converting to Linux, Debian 10 KDE.

  • I feel so stupid. Some recent posts I have read caused me to think I needed to disable root in SSH, so that was the first thing I did after up and running. So to run the command as root I have been using the su command. Obviously (now I see that) su is not the same as logging in as root.


    I just now

    • enabled root ssh login
    • logged in as root
    • ran the command

    omv-extras is installed and running fine. Now I am going to delete my account and create a new one named "StupidNoob". Maybe no one will make the connection. Sorry for the trouble, and thanks for your patience.

    Ha... ryecoaaron schooled me on that about 2yrs ago...lol and I've used Linux for years.


    The reality is, had you used

    Code
    su -

    it would have been fine. That - I learned is pretty important when it comes to the paths..

    Air Conditioners are a lot like PC's... They work great until you open Windows.


  • KM0201 just a dash after the su? Good grief!

    Easy data backup: In a Scheduled Job: rsync -av --delete /srv/dev-disk-by-label-SOURCE/ /srv/dev-disk-by-label-DESTINATION/ (HT: Getting Started with OMV5)
    OMV 5 (current) - Thinkserver TS140, Nextcloud, Plex, Airsonic, Navidrome, Ubooquity, Digikam, Wetty, & Heimdall - NanoPi M4 (v.1): backups using Rsync and Rsnapshot - Odroid XU4 (Using DietPi): PiHole - hc2, xu4, Pi 3B+, Odroid H2, and VirtualBox: Testing and playing - Mac user converting to Linux, Debian 10 KDE.

  • just a dash after the su? Good grief!

    Without the dash, root is using your profile which most likely does not have /usr/sbin or /sbin in its path. That breaks a lot of things.

    With the dash, root uses its own profile.

    omv 5.6.13 usul | 64 bit | 5.11 proxmox kernel | omvextrasorg 5.6.2 | kvm plugin 5.1.6
    omv-extras.org plugins source code and issue tracker - github


    Please read this before posting a question.
    Please don't PM for support... Too many PMs!

Participate now!

Don’t have an account yet? Register yourself now and be a part of our community!