Slow network transfer rate

Couple of questions first

- hard wired or WIFI

- network card or integral to motherboard

- if WIFI; 2.4 or 5G

- router and LAN and WIFI settings (if on WIFI)

- ISP provider and internet access speed you are paying for

- network settings in OMV (DHCP or Static) MTU

Do you have a capability to check internet access speed independent from OMV?.

Zitat von woodenmonster

Gigabit Ether

in server, what Brand & Model?
output of uname -a ?

Zitat von woodenmonster

all connections are hard wired

Network card

No Wifi

Microtik gigabit router, gigabit Cisco Managed switch.

200Mbps/200Mbps Fibre internet

Yes I do, internet speed is average 190Mbps

1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN group defaul t qlen 1000

link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00

inet 127.0.0.1/8 scope host lo

valid_lft forever preferred_lft forever

inet6 ::1/128 scope host

valid_lft forever preferred_lft forever

2: enp7s0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP group default qlen 1000

link/ether 00:22:2d:c2:0f:d7 brd ff:ff:ff:ff:ff:ff

inet 192.168.1.80/24 brd 192.168.1.255 scope global enp7s0

valid_lft forever preferred_lft forever

3: br-a90ec96331e8: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue sta te UP group default

Alles anzeigen

OK, on your NAS network card enp7s0 try following settings:

- Turn all "offload" options OFF

- Disable Interrupt Moderation / Set Interrupt Moderation rate to OFF

- Disable Flow Control OFF (on your router as well)

- Disable, if you have these settings on your network card, the following: Receive Side Scaling, Adaptive Inter-Frame Spacing, set "Enable PME" to DISABLED, Packet Priority & VLAN, Jumbo Packet.

Hope this will fix your issue.

Edit: do the same an all your computers in your intranet.