No Updates after upgrading to 5.6.13-1

  • Hello all,


    After upgrading to version 5.6.13-1 big thanks to macom and ryecoaaron, I have noticed that I don't get any new updates announced on OMV.



    I am wondering if everything is OK with the system, or I am missing something in the GUI settings, so far I left everything as default after the upgrade completed successfully.



    If you have any ideas or suggestions about where to check/verify that everything is working as expected will be greatly appreciated.


    Thank you very much in advance as always.


    Sincerely,

  • Well the latest OMV version is:

    https://www.openmediavault.org/?page_id=1271

    27. July 2021 by volker

    openmediavault 5.6.13

    omv 6.9.6-2 (Shaitan) on RPi CM4/4GB with 64bit Kernel 6.1.21-v8+

    2x 6TB 3.5'' HDDs (CMR) formatted with ext4 via 2port PCIe SATA card with ASM1061R chipset providing hardware supported RAID1


    omv 6.9.3-1 (Shaitan) on RPi4/4GB with 32bit Kernel 5.10.63 and WittyPi 3 V2 RTC HAT

    2x 3TB 3.5'' HDDs (CMR) formatted with ext4 in Icy Box IB-RD3662-C31 / hardware supported RAID1

    For Read/Write performance of SMB shares hosted on this hardware see forum here

  • donh,


    Thank you very much for the response, I think I spoke to early, I just checked when logging in via CLI and I can see there are a few updates available:

    Welcome to Debian Buster with Armbian Linux 4.14.135-mvebu

    System load: 0.59 0.14 0.05 Up time: 20 days

    Memory usage: 7 % of 2018MB Zram usage: 7 % of 1009Mb IP: 192.168.0.250

    CPU temp: 60°C Ambient temp: 38°C

    Usage of /: 2% of 179G


    [ 0 security updates available, 1 updates total: apt upgrade ]

    Last check: 2021-08-29 00:00


    [ General system configuration (beta): armbian-config ]


    Last login: Sun Aug 29 15:39:13 2021 from 192.168.0.10






    I think the system is working fine, thank you very much!


    Sincerely,

Jetzt mitmachen!

Sie haben noch kein Benutzerkonto auf unserer Seite? Registrieren Sie sich kostenlos und nehmen Sie an unserer Community teil!