Apologies if the question is sill ..
but is OMV6 installation possible on raspberry pi4 , yet ?
omv6 on raspberry pi4
-
- OMV 6.x
- Ghazzawi
-
macom
Added the Label OMV 6.x (beta) -
Yes, if you install Debian 11 Bullseye, 64 bits can also be installed (Google it for howto) and use the OMV install-script. It will then automatically install OMV 6 (beta).
-
It's possible but NOT recommended, yet
-
-
You'll have to explain that in more detail.
Is installing OMV6 on RasPi4 not recommended because it's still in beta status or is OMV6 on RasPi4 really more unstable than on AMD64?
The question is, does OMV6 run on Armhf (RasPi 4) or not? That it is not recommended is not up for debate. Any beta is not recommended and yet you can use it.
-
You'll have to explain that in more detail.
Is installing OMV6 on RasPi4 not recommended because it's still in beta status or is OMV6 on RasPi4 really more unstable than on AMD64?
Honestly, I don't "have to" explain nothing: You only have to take my remark with a pinch of salt.
It's an opinion,
OMV6 is still on BETA and beeing brushed.
Not only that, RaspiOS 11 is not officialy released yet which means you'll be running a hacked DebianOS under.
The two situations combined are an invitation to problems and if/when problems arise, it will be difficult to sort them out.
If you want a SERVER/NAS running a software and OS that might give issues and downtimes that you'll have some time to fix, than by all means, do it.
The question is, does OMV6 run on Armhf (RasPi 4) or not? That it is not recommended is not up for debate. Any beta is not recommended and yet you can use it.
As for this, yes it runs.
-
The question is, does OMV6 run on Armhf (RasPi 4) or not?
The question was already answered. As far as I am concerned: thread solved
-
-
-
Yes, if you install Debian 11 Bullseye, 64 bits can also be installed (Google it for howto) and use the OMV install-script. It will then automatically install OMV 6 (beta).
I've tried doing that by downloading and installing the latest Rasperry Pi OS (a.k.a. Raspbian) image (using the "Raspberry Pi OS Imager" utility from https://www.raspberrypi.com/software/) on a brand new SD Card, and then running the install script ( sudo wget -O - https://github.com/OpenMediaVault-Plugin-Developers/installScript/raw/master/install | sudo bash ), but got no luck. I get this error: "This system is running a desktop environment! This is not supported. Exiting..."
-
tried doing that by downloading and installing the latest Rasperry Pi OS (a.k.a. Raspbian) image (using the "Raspberry Pi OS Imager" utility
you need to download the Lite bullseye version to install OMV6
-
-
you need to download the Lite bullseye version to install OMV6
Nice to know man, thanks! I'll try that.
-
Is 64bit installation recommended now?
-
Is 64bit installation recommended now?
Yeah. If your device allows it, 64-bit is always preferable.
-
-
I have OMV 6 running on my RasPi 4. Only problem is the USB3 port and SSD enclosure. Works with RasPi4 USB2 port. Check out the following website for USB3/SSD issue:
Raspberry Pi 4 USB Boot Config Guide for SSD / Flash DrivesThe Raspberry Pi 4 is finally here and has a lot of exciting changes. One very major downside is that it doesn’t support true USB booting yet out of the box…jamesachambers.comSystem Info:
===========
Hostname: raspberrypi
OMV Version: 6.3.4-1 (Shaitan)
Processor: BCM2835
Revision: c03112
Model: Raspberry Pi 4 Model B Rev 1.2
RAM: 4G
OS: Raspberry Pi OS Lite (64-bit) A port of Debian Bullseye with no desktop environment
Kernel: Linux 6.1.19-v8+
SSD: SK Hynix SHGS31 - 500GS-2
USB3 Drive Connection: Sabrent Model:EC-OCUB
Drive Formated: EXT4
USB3 Powered Hub: Atolla 204
Static IP Address
-
Display More
I have OMV 6 running on my RasPi 4. Only problem is the USB3 port and SSD enclosure. Works with RasPi4 USB2 port. Check out the following website for USB3/SSD issue:
https://jamesachambers.com/ras…ide-for-ssd-flash-drives/
System Info:
===========
Hostname: raspberrypi
OMV Version: 6.3.4-1 (Shaitan)
Processor: BCM2835
Revision: c03112
Model: Raspberry Pi 4 Model B Rev 1.2
RAM: 4G
OS: Raspberry Pi OS Lite (64-bit) A port of Debian Bullseye with no desktop environment
Kernel: Linux 6.1.19-v8+
SSD: SK Hynix SHGS31 - 500GS-2
USB3 Drive Connection: Sabrent Model:EC-OCUB
Drive Formated: EXT4
USB3 Powered Hub: Atolla 204
Static IP Address
But is it because you're using an unspported case?
-
Changed the SSD case to UGREEN Model 50743. Now the RasPi4 USB3 port works and I am getting 100 MB/s transfer rates.
-
Participate now!
Don’t have an account yet? Register yourself now and be a part of our community!