Hello to all in the community. i'm a new guy in openmediavault and i'm already facing with a problem.
My zfs status is the following
pool status (zpool status):
Code
pool: ZFS
state: DEGRADED
status: One or more devices are faulted in response to persistent errors.
Sufficient replicas exist for the pool to continue functioning in a
degraded state.
action: Replace the faulted device, or use 'zpool clear' to mark the device
repaired.
scan: scrub repaired 0B in 06:40:48 with 0 errors on Mon Oct 4 19:11:49 2021
config:
NAME STATE READ WRITE CKSUM
ZFS DEGRADED 0 0 0
mirror-0 DEGRADED 0 0 0
scsi-3600508b1001ce0618b18bba88ecf0675 ONLINE 0 0 0
scsi-3600508b1001c708e7e846b76d45b51f0 FAULTED 23 0 444 too many errors
errors: No known data errors
Alles anzeigen
i have two Seagate Ironwolf 4TB as logical volumes as i have openmediavault on debian in a windows server 2019 hyper-v.
SMART information in openmediavault are not saying too much. See below
Code
smartctl 7.2 2020-12-30 r5155 [x86_64-linux-5.4.128-1-pve] (local build)
Copyright (C) 2002-20, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Vendor: HP
Product: LOGICAL VOLUME
Revision: 6.00
Compliance: SPC-3
User Capacity: 4,000,753,475,584 bytes [4.00 TB]
Logical block size: 512 bytes
Physical block size: 4096 bytes
>> Terminate command early due to bad response to IEC mode page
A mandatory SMART command failed: exiting. To continue, add one or more '-T permissive' options.
Alles anzeigen
On windows 2019 server Event Viewer i have found some bad sector errors.
How can i determine what is happening and some proper tests as it seems that i'm not able to do smething from openmediavault. From windows server 2019 the drives are marked offline so i can't make an error checking.
edit #1:
i've found from HP insight diagnostics the following:
Code
Hard Drive 3, 4.0 TB, SATA, ATA ST4000VN008-2DR1
O Passed
© HardDrive Location: Thie hard drive at connector 4I, enclosure number 0, enclosure bay 4.
© The read/write hard error count recorded in the monitor and performance log. Count 679, total Bits Transferred 2.95361e+14
© Accumulated power-on time for this bard drive: 7.6 months
© Percent endurance used for tbis bard drive: 0.0096
© An internal software problem occurred while generating tlie diagnosis result for this drive. Output may be incomplete.