Replacing disk in Raid1 [OMV6] - entry not visible

M*I*B · 19. November 2021

... we will see ...

Meanwhile I rewrite the backup- image to the system- drive (there isn't OMV in).

After apt update (sourcelist is filled with the OMV repro) I got a error that I haven't last time. May you know to solve that (have tralslated it by google)?

Code

root @ SV-OMVNAS: ~ # apt install openmediavault
Package lists are read ... Done
The dependency tree is being built ... Done
Status information is read in ... Done
Some packages could not be installed. That can mean that
You have requested an impossible situation or when you have the
Unstable distro use that some required packages still
have not been created or have not yet left Incoming.
The following information may help you resolve the situation:

The following packages have unfulfilled dependencies:
  php-pam: Depends on: phpapi-20180731 but cannot be installed
E: Problems cannot be corrected, you have defective packages withheld.

Alles anzeigen

geaves · 19. November 2021

Zitat von M*I*B

Meanwhile I rewrite the backup- image to the system- drive (there isn't OMV in)

you never, or rather I would never restore a backup to an existing working system, always restore to another drive. How did you create the backup image, but that error is something I'm not familiar with

M*I*B · 19. November 2021

... the image is hardcore created: Unplug system drive, plug into other machine, create ISO by AOMEI Backupper

geaves · 19. November 2021

Zitat von M*I*B

create ISO by AOMEI Backupper

That's a windows piece of software, if you're using windows you should use Win32DiskImager to create a a disk image, this image can be used to 'write' the .img file to a drive of the same size. It is what I use and I rotate 32GB flash drives

M*I*B · 19. November 2021

Error installing OMV6 on Armbian Bullseye (php-pam : Depends: phpapi-20180731 but it is not installable)

The User got the same problem on other hardware

geaves · 19. November 2021

Zitat von M*I*B

The User got the same problem on other hardware

That's correct as he was using an SBC but following the installation for amd64, he then states that the missing package is from Buster -> OMV5, which is not available on Bullseye -> OMV6

M*I*B · 19. November 2021

Zitat von geaves

Win32DiskImager

... do the same ... Both work well in any way ...

M*I*B · 19. November 2021

Zitat von geaves

That's correct as he was using an SBC but following the installation for amd64, he then states that the missing package is from Buster -> OMV5, which is not available on Bullseye -> OMV6

... stop a moment ...

On my other thread some weeks ago someone tell me that OMV6/usul will be used via apt if it based on Debian 11 and OMV5 if Debian 10 is the base...

So if Debian 11 the base and OMV6 runs on it why OMV try to use a package what only exist in Debian 10???

geaves · 19. November 2021

Ok lets go back to this ->

Zitat von M*I*B

Meanwhile I rewrite the backup- image to the system- drive (there isn't OMV in)

that suggests to me that is not a back up of a previous OMV, because this ->

Zitat von M*I*B

root @ SV-OMVNAS: ~ # apt install openmediavault

is not the way to install OMV

M*I*B · 19. November 2021

Zitat von geaves

is not the way to install OMV

Not?

And why is exactly that described here if that is not "the way"?

https://openmediavault.readthe…stallation/on_debian.html

I didn't have any problems with the description about 3 weeks ago (other thread) ...

geaves · 19. November 2021

Zitat von M*I*B

And why is that describe here?

It's not, the installation in the docs is based upon using Debian NetInst on an amd64 system which really is not necessary unless a user has issues with OMV's ISO

OK lets go back, what is your hardware?

M*I*B · 19. November 2021

Supermicro X10SLL-F, XEON E3-1220, 64gb ECC RAM, 2 x SAS2008 PCI-Express Fusion-MPT SAS-2 [Falcon], 12-bay 19"

Zitat von geaves

is based upon using Debian NetInst on an amd64

... jepp. Exactly what I have do around 3 weeks ago and meanwhile right now again. Image is "debian-11.1.0-amd64-netinst.iso"

Soma · 19. November 2021

Zitat von M*I*B

Image is "debian-11.1.0-amd64-netinst.iso"

OMV image is NOT that one.

And to install the way you did:

Installation on Debian — openmediavault 6.x.y documentation

Zitat

To do so, on x86 simply install the system using the Debian netinst images. After that apply the commands below.

Install the openmediavault keyring manually

Add the package repositories

Install the openmediavault package:

Alles anzeigen

geaves · 19. November 2021

Based upon your system that would explain why you completed a Debian NetInst first and the image you have restored is Debian Bullseye

But there should be no reason why you couldn't use the install script

sudo wget -O - https://github.com/OpenMediaVa…Script/raw/master/install | sudo bash

this would install OMV on your netinst, this was something I tested when I was on OMV4 before moving to OMV5 and it worked flawlessly.

Soma · 19. November 2021

And select the Image you want to burn. OMV5 or OMV6, your choice.

M*I*B · 19. November 2021

... ok ...

Maybe it's because of my bad English or because I'm just stupid ...

Soma:

You say "OMV image is NOT that one.", but do not say why it is not. That don't help me any further.

In the further you refer to https://openmediavault.readthe…stallation/on_debian.html where exactly the same is what I have already linked above and what I have now oriented myself every time. So doesn't help either.

geaves:

The link to the installation script is empty (404, not found).

So I summarize briefly:

:start

There are detailed instructions under https://openmediavault.readthe…stallation/on_debian.html, after which I was able to set up an executable system about three weeks ago without any problems and which also links to the Debian image, which I use here. Now it says, however, that the instructions are wrong, but the correct link again refers to exactly the same page and is then correct ...

goto start;

Sorry, but that's not how I get a step forward ... except my frustration ...

geaves · 19. November 2021

Zitat von M*I*B

The link to the installation script is empty (404, not found).

Don't use the link just copy and paste the complete line

geaves · 19. November 2021

Zitat von M*I*B

Maybe it's because of my bad English or because I'm just stupid

Not at all, I do find it difficult to explain something when there is a difference in language, and my Dutch (guessing here) is not good, it wasn't great 40 years ago when I was in Holland, but I got by

M*I*B · 19. November 2021

Zitat von geaves

Don't use the link just copy and paste the complete line

... for shure ...

Code

root@SV-OMVNAS:~ # wget -O - https://github.com/OpenMediaVa…Script/raw/master/install
--2021-11-19 20:13:46--  https://github.com/OpenMediaVa%E2%80%A6Script/raw/master/install
Resolving github.com (github.com)... 140.82.121.4
Connecting to github.com (github.com)|140.82.121.4|:443... connected.
HTTP request sent, awaiting response... 404 Not Found
2021-11-19 20:13:47 ERROR 404: Not Found.

root@SV-OMVNAS:~ #

... ahhh, I see... Dot's are not so good for that LOL

Code

% [Connected to nav.dl.sourceforge.net (5.154.224.27)]

... that every time runs on an timeout ...

geaves · 19. November 2021

You missed | sudo bash off the end

Jetzt mitmachen!