OMV 5/6 HP computer installation Failure NO OS Found

kubidootwo · 9. Januar 2022

I am trying to install OMV 5 on a HP Model# M01-F-1063wb. I downloaded iso to usb 4gig(per TechnoDad yt). I go thru install to 32gig usb(usb 3.0) and shows complete. Upon reboot, cannot find boot file. Note I have removed the windows 10 hdd and put in two new wd 14tb(raid 0 config) not formatted. I tried changing bios, startup, uefi etc and to no avail. Next tried in the front usb 2.0(googled, could be issue). Still same failure. Next I removed 1 hdd and put in 256ssd to install OMV. It installs and upon reboot same issue. I have googled and

cannot seem to find any answers. I am hoping someone in this forum can help.

Thx kubidootwo

kubidootwo · 10. Januar 2022

Bump...as no replies.

I tried omv 6 beta still fails. Is there anyone can help me?

k

geaves · 10. Januar 2022

Plug the usb installer drive in, but make sure you boot from the drive that omv is installed on, you can login as root using ssh or from the console with a keyboard and monitor attached and run update-grub shutdown and remove the installer drive

chente · 10. Januar 2022

Zitat von kubidootwo

Upon reboot, cannot find boot file

Is this the problem? After installing, can't boot from that drive? It looks like a BIOS setup problem.

ryecoaaron · 10. Januar 2022

This desktop is pretty bleeding edge and probably causing the problem.

I would try the debian 11 netinst. If that boots, then you can use the install script to install omv.

If that does not work, then put the ssd in a different system, install OMV, move ssd back to HP, boot, and run omv-firstaid to fix networking.

ryecoaaron · 10. Januar 2022

Zitat von chente

It looks like a BIOS setup problem.

Good point. I would try disabling secure boot too.

kubidootwo · 10. Januar 2022

Installation from usb 4g to a usb 8g completes installation. On reboot to test system, says no boot os found. As if it does not read usb 8g. Boot order is setup for usb first. I have tried to turn off secure boot, uefi, changed to ahci etc. Same thing.

"I would try the debian 11 netinst. If that boots, then you can use the install script to install omv."

Is there a guide for this? I am a newbie at linux, but trying to learn.

Thx

K

chente · 10. Januar 2022

Zitat von kubidootwo

Is there a guide for this?

https://openmediavault.readthe…stallation/on_debian.html

Important. Don't install debian desktop when installation prompts you. OMV will not work on a desktop system.

You can choose 32 or 64bits.

kubidootwo · 11. Januar 2022

Zitat von chente

https://openmediavault.readthe…stallation/on_debian.html
Important. Don't install debian desktop when installation prompts you. OMV will not work on a desktop system.
You can choose 32 or 64bits.

Please correct me if I am wrong this has i3 processor, so I use an armbian buster iso?

What if I just put on omv6? Which iso for usb stick and no desktop?

Thanks for helping me learn.

k

ryecoaaron · 11. Januar 2022

Zitat von kubidootwo

so I use an armbian buster iso?

No. Armbian is for arm processors. You have intel x86 and should use the amd64 ISOs. The netinst image does not have a desktop and you should not choose to install it.

crashtest · 11. Januar 2022

This is an easy, step by step, install process. -> Alternate Install Use a 64bit netinst for OMV5.

chente · 11. Januar 2022

Zitat von ryecoaaron

The netinst image does not have a desktop and you should not choose to install it.

Watch out. The netinst image gives the option to install desktop during the installation process. That is why I warned that you should choose NOT to install it.

If you choose the Debian 10 image later the script will install OMV5, If you choose the Debian 11 image later the script will install OMV6.

Soma · 11. Januar 2022

Zitat von ryecoaaron

This desktop is pretty bleeding edge and probably causing the problem.

This brings back the issue on installing in a ASUS PRIME H410M mainboard which took around 20 pages:

New install fails with fclose - General - openmediavault

Zitat von ryecoaaron

If that does not work, then put the ssd in a different system, install OMV, move ssd back to HP, boot, and run omv-firstaid to fix networking.

In the end, the user from above, did it that way and it's sorted.

kubidootwo

Are you doing the install with ONLY the installation stick and the drive where you want to install to?

No other drives attached?

crashtest · 11. Januar 2022

Zitat von chente

Watch out. The netinst image gives the option to install desktop during the installation process.

That is the reason for this screen shot and instructions, in the the 32bit / Alt 64 bit install. To try to make it a bit more clear, I'll edit the following with a caution statement.

Of course, if users follow an internet guide, all bets are off.
______________________________________________________________________

Software selection
Only the SSH server should be selected. Make changes to reflect the following and Continue.

fetch.php?w=600&tok=d63994&media=32bit22_debian_install16.jpg

crashtest · 11. Januar 2022

I added the following to the above:

DO NOT select additional packages. Desktops are not supported.

kubidootwo · 11. Januar 2022

Yes, I did not pick desktop environment. Thank you. It still failed due to not find any OS. I checked the bios F10(Hp). Did a google search how to disable OS boot manager. I found this article for others with this issue. https://h30434.www3.hp.com/t5/…om-bios-boot/td-p/6587433

Namely, you must change in F10 Bios and F9 Boot Manager to chose the "New" boot you wish to you. I was able to boot to Debian after, unfortunately I did not do something correct to install OMV.

Any help from debian command line would be helpful? Thanks for the continued support.

k

chente · 11. Januar 2022

Zitat von kubidootwo

I was able to boot to Debian after, unfortunately I did not do something correct to install OMV.

Can you describe this in more detail?

kubidootwo · 11. Januar 2022

Zitat von chente

Can you describe this in more detail?

I did the install and removed all choices. Did not see to keep ssh server. Then I tried to type the install information from here: https://openmediavault.readthe…stallation/on_debian.html

Keep making errors. Wish there was a way to copy and paste. I could probably start over and install OMV now, from what I have learned. But I thought if I have Debian installed maybe I should keep it and just install OMV. Is that good choice?

k

Zoki · 11. Januar 2022

Take a shortcut and run this.

sudo wget -O - https://github.com/OpenMediaVault-Plugin-Developers/installScript/raw/master/install | sudo bash

Will install Omv and the extras

crashtest · 11. Januar 2022

Follow this -> installation guide (use the Debian 64bit netinst ISO). After the Debian installation is complete, install PuTTY on a Windows or Mac client (this will explain -> PuTTY)

You will then be able to copy and paste into the Debian command line. After copying something from your client (cntl+c), in PuTTY, a right mouse click will paste onto the command line.

OMV 5/6 HP computer installation Failure NO OS Found

kubidootwo 10. Januar 2022

kubidootwo 10. Januar 2022

Jetzt mitmachen!

Ähnliche Themen

RAID showing clean, degraded

Building first homeserver. OMV5 installed. RAID6 running.

Tags