Hallo,
ich habe OMV6.0.17-1 auf einem Raspberry Pi4 installiert und eine externe 3,5'' HDD mit eigener Stromversorgung als Datenspeicher angeschlossen. Formatiert und eingebunden mit ext4.
Freigabe über NFS erstellt. Soweit dann auch über einen Proxmox-Server bzw. Proxmox-Backup-Server erreichbar.
Da der Raspberry nicht 24/7 laufen soll, ist ein Auto-shutdown eingerichtet. Gestartet wird der Raspberry mit einer Zeitschaltuhr.
Jedes Mal, wenn OMV herunterfährt und danach wieder neu gestartet wird, sind nie NFS-Shares nicht mehr erreichbar. (Inhalte könne aber über SMB-Share geöffnet werden). Sobald ein einen der NFS-Shares auf OMV eine Einstellung geändert wird (egal bei welchem Share und egal welche Einstellung) sind die Shares nach der Übernahme sind die Konfiguration wieder erreichbar. Mir scheint demnach, dass die NFS-Einstellungen beim Starten nicht vollständig geladen werden. Gibt es hierfür eine Lösung oder einen Workaround?
Übersetzung via Google-Translator, daher bitte ich schon jetzt um Entschuldigung...
-----------------------------------------------------------------------------
Hello,
I installed OMV6.0.17-1 on a Raspberry Pi4 and connected an external 3.5'' HDD with its own power supply as data storage. Formatted and embedded with ext4.
Share created via NFS. As far as can be reached via a Proxmox server or Proxmox backup server.
The Raspberry should not run 24/7, so an auto shutdown is set up. The Raspberry is started with a timer.
Every time OMV shuts down and then restarts again, NFS shares are not even reachable. (Contents can, however, be opened via SMB share). As soon as a setting is changed in one of the NFS shares on OMV (regardless of which share and regardless of the setting), the shares are accessible again after the transfer of the configuration. So it seems to me that the NFS settings are not fully loaded on startup. Is there a solution or a workaround for this?