Hi
I've bought a Topton Fanless Mini PC at AliExpress. It's based on the Celeron N5105, it has 4x2.5Gb ethernet ports and usually it's meant for a pfsense/opnsense firewall but I've decided to use it as a small NAS running 24/7.
Because the NAS only needs a single ethernet port and 2.5Gb switches are still rather pricy, I thought I could use the additional 3 ports for switching. After some digging around I've found that I need to bridge all the ports together and I was able to do that through OMV UI.
The NAS and its shares are still running fine but unfortunately when I plug in a different PC to one of the previously unused ports, it does not recieve an IP address from DHCP. If I assign a static IP to that PC, I can communicate with the NAS but not with any other machines in the network.
I don't know what I'm doing incorrectly, so I would be grateful for any help or pointers into how I can achieve my goal
Best regards!