I am relatively new to the Raspberry Pi, Linux, OMV, Docker and Portainer but just recently I have been experimenting with these on a Raspberry Pi 4.
I have a Pi 4 installed in an Argon One M.2 case. In the case I have also installed a 1TB M.2 sata memory module connected to the Pi vis USB 3.0. I use this memory to hold all the OMV shared folders
I set up the Pi with the Pi OS Lite (64-bit) and then installed OMV 6.0. After setting up OMV I then installed Docker and Portainer.
Following the advice available on the web and looking at several Youtube videos I was able to use Portainer to set up a Plex Media Server. All appeared to go correctly and I was able to access the Volume I set up for Plex and all the folders necessary for a basic Plex setup.
However I am having difficulties in getting Plex to find the music files.
When I set up the necessary volumes in Portainer I am required to enter the paths for the volumes. The advice on the web is not very clear so question is this:
Do I use relative or absolute paths, or does it not matter?