Missing drive

  • Hello,


    I have received a notification by snapraid today:

    Quote

    ERROR - Data Disk /srv/dev-disk-by-uuid-1e9433cd-993d-4af7-9114-fb761bccdbbf not found or is not mounted!

    Sync job cancelled to prevent data loss.


    Altough smart is configured, I did not get a notification yet that this drive is missing :/


    When looking at the Filesystems Section of the Web-Interface, I see one drive missing (in fact two drives, but one of it is a USB drive, that I use for Backups).

    But from the WebInterface, I have no way to identify what this drive is, that is missing.


    Looking further, I get some clues:

    Code
    cat /etc/fstab |grep 1e9433cd
    /dev/disk/by-uuid/1e9433cd-993d-4af7-9114-fb761bccdbbf          /srv/dev-disk-by-uuid-1e9433cd-993d-4af7-9114-fb761bccdbbf      ext4    defaults,nofail,user_xattr,usrjquota=aquota.user,grpjquota=aquota.group,jqfmt=vfsv0,acl   0 2
    
    /media/678c601d-8d2e-4be0-9226-d20a6f772f8b:/srv/dev-disk-by-label-Big5:/srv/dev-disk-by-id-ata-ST4000DM005-2DP166_ZDH26KL5-part1:/srv/dev-disk-by-uuid-1e9433cd-993d-4af7-9114-fb761bccdbbf              /srv/mergerfs/Big_Snapraid      fuse.mergerfs   category.create=epmfs,minfreespace=4G,fsname=Big_Snapraid:c3962c49-2858-4b69-b627-ce1c63630a92,defaults,allow_other,cache.files=off,use_ino,x-systemd.requires=/media/678c601d-8d2e-4be0-9226-d20a6f772f8b,x-systemd.requires=/srv/dev-disk-by-label-Big5,x-systemd.requires=/srv/dev-disk-by-id-ata-ST4000DM005-2DP166_ZDH26KL5-part1,x-systemd.requires=/srv/dev-disk-by-uuid-1e9433cd-993d-4af7-9114-fb761bccdbbf        0 0

    So far, it makes sense.


    But now, I would like to see, what Serialnumber this drive has - that is the only way that I know to really identify the drive.

    Is there any way to get that?


    Improvements that I would wish from OMV:

    Today Web-Interface indicates drives that are missing, but gives no information whatsoever in order to identify the broken drive.

    To be: The following information should be displayed to identify the missing drive:

    1) Drive Serial-Number

    2) UUID

    3) previous mountpoint

    4) (last known) /dev/sd* designator


    Best regards,

    Hendrik

  • Thanks.


    So, I would print that list, go to the machine and check for which drive I cannot find the S/N in the Web-Interface, right?


    Still, I think OMV could do better... In the Filesystems Tab it should indicate what Drive is missing.

    Otherwise, there remains guesswork, no?


    Best regards,

    Hendrik

Participate now!

Don’t have an account yet? Register yourself now and be a part of our community!