Omv stuck on 6.0.6-1

1. offizieller Beitrag

    Hi, I try to update my OMV. It is stuck on 6.0.6-1.

    I dont want to do a fresh install unless I have to.

    I had first installed debian 11 then OMV 6 afterwards because there were no compatible ethernet drivers at the time.

    Installation done on internal ssd.


    I have already tried these command lines:

    apt-update

    apt list --upgradable who found shaitan 6.0.35-1

    apt-upgrade

    apt get upgrade

    omv-upgrade

    apt-get install

    apt-get dist-upgrade


    What Can I do to force update ?


    in addition to that, without having touched anything, since yesterday I no longer know how to connect to the web interface. No worries via Putty as root on another pc or on the console of the server pc under debian 11.


    Thanks for your help.

    • Offizieller Beitrag

    What is the output of: apt-cache policy openmediavault

    omv 7.0.5-1 sandworm | 64 bit | 6.8 proxmox kernel

    plugins :: omvextrasorg 7.0 | kvm 7.0.13 | compose 7.1.4 | k8s 7.1.0-3 | cputemp 7.0.1 | mergerfs 7.0.4


    omv-extras.org plugins source code and issue tracker - github - changelogs


    Please try ctrl-shift-R and read this before posting a question.

    Please put your OMV system details in your signature.
    Please don't PM for support... Too many PMs!

    Zitat von ryecoaaron

    What is the output of: apt-cache policy openmediavault


    Thanks for your answer :)


    Code
    root@NASOMV:~# apt-cache policy openmediavault
openmediavault:
Installed: 6.0.6-1
Candidate: 6.0.35-1
Version table:
6.0.35-1 500
500 http://packages.openmediavault.org/public shaitan/main amd64 Packages
500 https://openmediavault.github.io/packages shaitan/main amd64 Packages
*** 6.0.6-1 100
100 /var/lib/dpkg/status
    • Offizieller Beitrag

    Ok. That looks good. What about: sudo apt-get install openmediavault

    omv 7.0.5-1 sandworm | 64 bit | 6.8 proxmox kernel

    plugins :: omvextrasorg 7.0 | kvm 7.0.13 | compose 7.1.4 | k8s 7.1.0-3 | cputemp 7.0.1 | mergerfs 7.0.4


    omv-extras.org plugins source code and issue tracker - github - changelogs


    Please try ctrl-shift-R and read this before posting a question.

    Please put your OMV system details in your signature.
    Please don't PM for support... Too many PMs!

    I had tested "apt-get install" but not apt-get install openmediavault ^^



    Now I have the latest version installed, thank you!


    However, I still can't connect to the web interface :(

    Is it possible to control username and password via Putty and root access?


    Code
    root@NASOMV:~# df -hx --max-depth=1 /
Filesystem      Size  Used Avail Use% Mounted on
/dev/nvme0n1p5  178G  159G  9.6G  95% /

    • Offizieller Beitrag

    Probably you need to get some space on your root fs to get access to the GUI

    Thema
    [How-To] Fix full OS filesystem - GUI login loop
    Symptoms

    When you try to login to the GUI of OMV you are not being logged in, but the login page shows up again

    Check, if a full root filesystem is the problem
    ssh into your server (check the new user guide on how to ssh into your server) and run following command
    df df will show you the usage of each filesystem
    the output of df will look like this:
    (Quelltext, 19 Zeilen)

    The filesystem dev/sda1 which is mounted on "/" is the OS filesystem. The use of that filesystem is 100% --> the OS filesystem is…
    macom
    • Offizieller Beitrag

    Your problems are caused from not reading the install guide. You are installing on a desktop which is causing the problems.

    omv 7.0.5-1 sandworm | 64 bit | 6.8 proxmox kernel

    plugins :: omvextrasorg 7.0 | kvm 7.0.13 | compose 7.1.4 | k8s 7.1.0-3 | cputemp 7.0.1 | mergerfs 7.0.4


    omv-extras.org plugins source code and issue tracker - github - changelogs


    Please try ctrl-shift-R and read this before posting a question.

    Please put your OMV system details in your signature.
    Please don't PM for support... Too many PMs!

    Zitat von ryecoaaron

    Your problems are caused from not reading the install guide. You are installing on a desktop which is causing the problems.

    Yet I seem to have followed the guide at the time :(

    I had no choice in November to install on a light version of Debian 11 since the drivers were not recognized directly with OMV 6.

    On OMV 5 the installation worked.

    I tried again today with the new iso of OMV 6.0.24 directly on a usb key and no problem with the drivers.

    So really if nothing works I will uninstall Debian 11 and OMV 6 and reinstall OMV 6 alone.


    Zitat von macom

    Probably you need to get some space on your root fs to get access to the GUI

    Thema
    [How-To] Fix full OS filesystem - GUI login loop
    Symptoms

    When you try to login to the GUI of OMV you are not being logged in, but the login page shows up again

    Check, if a full root filesystem is the problem
    ssh into your server (check the new user guide on how to ssh into your server) and run following command
    df df will show you the usage of each filesystem
    the output of df will look like this:
    (Quelltext, 19 Zeilen)

    The filesystem dev/sda1 which is mounted on "/" is the OS filesystem. The use of that filesystem is 100% --> the OS filesystem is…
    macom

    I'll see what I can do but I've already run the command df -hx --max-depth=1 /

    9.5gb free.


    • Offizieller Beitrag
    Zitat von rere130

    I had no choice in November to install on a light version of Debian 11 since the drivers were not recognized directly with OMV 6.

    In November the install script still allowed to install in a desktop environment, if I remember correctly.

    I think you should try to get rid of that desktop environment, maybe then the system can recover. In google you will find guides to uninstall a desktop. Be careful what the commands uninstall, read it carefully before saying YES.

    Since the new OMV 6 iso dating from June 2022 recognizes my network card integrated into the motherboard, I reinstalled OMV6 on my SSD from zero directly.

    Just reconfigure my Portainer now :p


    I don't know why after 10 months user/password didn't work anymore on GUI...


    Thanks for your help ;)

Jetzt mitmachen!

Sie haben noch kein Benutzerkonto auf unserer Seite? Registrieren Sie sich kostenlos und nehmen Sie an unserer Community teil!

Benutzerkonto erstellen Anmelden