Nach Power off ohne Funktion / Not working after Power off

  • Hallo und schönen Sonntag,


    ich hab ein extrem seltsames Problem. Wir sind Anfang September für 3 Wochen in den Urlaub gefahren. Um Strom zu sparen haben wir vorher alles komplett aus gemacht, inkl dem NAS. Dazu den Powerbutton gedrückt (leider nicht per software runter gefahren, meine Frau........) und den Netzschalter am Netzteil auf aus. Netzwerk- und Stromkabel blieben verbunden.


    Nach der Rückkehr Netzschalter wieder auf an und Powerbutton gedrückt. Die Lüfter laufen an, aber sonst passiert nix. Kein Zeichen von dem NAS im Netzwerk.

    Daraufhin NAS mit Bildschirm und Tastatur verbunden um zu schauen was los ist. NIX, kein Videosignal. Weder auf VGA, HDMI noch DPI. 2 verschiedene Bildschirme probiert.


    NAS also zu einem anderen LAN Anschluss gebracht, alle Datenplatten abgeklemmt und nur die OS Platte dran gelassen. Neustes OMV per Rufus auf einen Stick gespielt und am USB 2 Steckplatz vom Mainboard (Asrock Q1900ITX) angesteckt. Mainboard Batterie für 30sec entnommen und NAS neu gestartet.


    KEINE REAKTION what so ever!! Was ist da los?? Was kann in den 3 Wochen passiert sein?? Stromschlag? Ist das Mainboard gegrillt?? Was kann es sein und wie j´kann ich es raus finden.


    Ich hoffe jemand kann helfen. Bin absolut ratlos.


    Vielen Dank für Eure Zeit, Mühe und Hilfe


    Matt





    Hello and happy Sunday,


    I have an extremely strange problem. We went on vacation for 3 weeks at the beginning of September. In order to save electricity, we turned everything off completely beforehand, including the NAS. To do this, i pressd the power button (unfortunately no shut down by software, my wife........) and the power switch on the power supply unit to off. Network and power cables stayed connected.


    After returning, i put the power switch back to on and then power button pressed. The fans run, but nothing else happens. No sign of the NAS on the network.


    Then i connected the NAS to a screen and keyboard to see what's going on. Nothing, no video signal. Neither on VGA, HDMI nor DPI. Tried 2 different screens.


    So i brought the NAS to another LAN connection, disconnected all data disks and left only the OS disk on. The latest OMV was played on a stick via Rufus and plugged into the USB 2 slot on the mainboard (Asrock Q1900ITX). i Removed the mainboard battery for 30 seconds and restarted the NAS.



    NO RESPONSE what so ever!! What's going on there?? What can have happened in the 3 weeks?? electric shock? Is the motherboard grilled? What can it be and how can I find out.




    I hope someone can help. I'm absolutely at a loss.




    Thank you for your time, effort and help


    Matt

  • reeneex

    Hat das Label von OMV 4.x auf OMV 5.x geändert.
  • Hi

    ich glaube , das Netzteil ist kaputt , ich würde eine neue Mainboard Batterie nehmen.

    Das Netzteil gibt aber Strom ab, die Lüfter laufen und die LED Kontrolleuchte leuchtet. Leider sind auf dem Mainboard keine LED´s oder ein Lautsprecher für Töne verbaut.

    Die Mainboard Batterie kann ich mal versuchen.

  • ich verstehe die aussage ehrlich gesagt nicht. das Netzteil läuft und liefert strom, ztu erkennen an den sich drehenden lüftern und an der blauen Kontroll led ausen am gehäuse die angeht wnn ich den startknopf drücke. die CR2032 habe ich momentan nicht auf lager, aber bestellt. ich versuche später noch mal die alte.

  • Wenn ein Teil der Stromversorgung funktioniert können die led. leuchten, was ist mit 5V und 12V, sonst würden nur 2Pins sein und nicht 20 Pins.

    Hast du ein Altes Netzteil ?

    https://github.com/Wolf2000Pi


    OMV6 Hewlett-Packard HPE-411at - Intel Core i7 CPU 870 @ 2.93GHz - 16GB Ram

    Proxmox omv 7 sandworm Dell OptiPlex 7050 i5-6500 CPU @ 3.20GHz - 32GB Ram (Test!!!!)

Jetzt mitmachen!

Sie haben noch kein Benutzerkonto auf unserer Seite? Registrieren Sie sich kostenlos und nehmen Sie an unserer Community teil!