OMV6 - No connection to interface and server - RAID1

  • I tried today to get to my OMV6 interface. This failed every time after starting the server. I also could not get to my Docker containers. Per SSH also nothing goes straight.


    Yesterday I installed Syncthing as a container.


    This morning the connection worked for a little while until it abruptly stopped and then the connection to the entire server was gone.


    I can wake up the server via WOL.


    How can I still try to reconnect?


    Or do I have to reinstall everything now? If so, what do I have to pay attention to?

  • Reinstalling seems like a last resort. If you cannot connect to your OMV6 system via ssh, can you at least ping OMV6? Assuming there's no firewall to block a ping response, and the ping packets are not all dropped, do a port scan to see if there any services running on your OMV6 box? If OMV6 appears totally unresponsive/inactive then it's time to get to the OMV6 console directly to diagnose the problem. I'm guessing you can only do that with a monitor and keyboard attached to your OMV6 system.

  • Reinstalling seems like a last resort. If you cannot connect to your OMV6 system via ssh, can you at least ping OMV6? Assuming there's no firewall to block a ping response, and the ping packets are not all dropped, do a port scan to see if there any services running on your OMV6 box? If OMV6 appears totally unresponsive/inactive then it's time to get to the OMV6 console directly to diagnose the problem. I'm guessing you can only do that with a monitor and keyboard attached to your OMV6 system.

    Thanks a lot for your answer. What is about the RAID1 data storages, if I have to install the system new to the OMV storage disk?

  • Hi there,


    after researching I found out that my local network was the problem. I am using Devolo Dlan adapters to connect some network devices. My DSL router stopped the conection and I had to reboot the dlan network. Now I can work with OMV6 & Co.!

  • wmcig

    Added the Label resolved
  • wmcig

    Added the Label OMV 6.x

Participate now!

Don’t have an account yet? Register yourself now and be a part of our community!