Intel Server CPU temp not showing on dashboard

1st Official Post

    Extras installed same as a similar build with different MB that works.

    Temp just shows red blank on dashboard.

    CLI shows both CPU : sensors


    Intel S5520 HC board

    Dual Xeon CPU5110@1.60GHz


    coretemp-isa-0001

    Adapter: ISA adapter

    Core 0: +43.0°C

    Core 1: +45.0°C


    coretemp-isa-0000
    Adapter: ISA adapter

    Core 0: +55.0°C

    Core 1: +55.0°C


    sensors-detect shows:

    Hygon Family 18h thermal sensors... No

    Intel digital thermal sensor... Success!

    (driver `coretemp')

    Intel AMB FB-DIMM thermal sensor... Success!

    (driver `i5k_amb')

    Intel 5500/5520/X58 thermal sensor... No

    VIA C7 thermal sensor... No

    VIA Nano thermal sensor... No


    Trying family `National Semiconductor/ITE'... Yes

    Found `Nat. Semi. PC87427 Super IO Fan Sensors'

    (but not activated)

    Found `Nat. Semi. PC87427 Super IO Health Sensors'

    (but not activated)


    Any ideas why it is not showing up?

    • Official Post
    Thread
    Guide - Custom cpu temp script for openmediavault-cputemp plugin
    With the latest version of the cputemp plugin, additional cpu temp support can be added without changing the plugin.

    Creation of a script that gets the temperature is required. The cputemp plugin by default does not support my Ryzen 3600. Here is how you can customize the plugin to work with the Ryzen. This will most likely not work work with other chips. You will need to ask for support on the forum to write a custom cpu-temp script for your system.

    Make sure to install and configure the…
    ryecoaaron
    Post
    RE: Cputemp Thermal Zone Selection
    Hi
    Edit the new cpu-temp script
    sudo nano /usr/sbin/cpu-temp

    Type or paste this line for a newer Intel chip.
    sensors coretemp-isa-0000 | grep '0:' | head -n4 | cut -c 16-23

    ctrl-o to save, ctrl-x to exit
    chmod +x /usr/sbin/cpu-temp

    Execute cpu-temp to make sure it is working
    cpu-temp

    Then execute the following commands. The DIVISOR variable is needed because the script returns 275 for 27.5C. So, I need to divide by 10. The default is 1000.
    sudo omv-env set "OMV_CPU_TEMP_COMMAND" "/usr/sbin/cpu-temp"
    sudo…
    Wolf2000

    https://github.com/Wolf2000Pi


    OMV6 Hewlett-Packard HPE-411at - Intel Core i7 CPU 870 @ 2.93GHz - 16GB Ram

    Proxmox omv 7 sandworm Dell OptiPlex 7050 i5-6500 CPU @ 3.20GHz - 32GB Ram (Test!!!!)

    Well here is the complete output of #sensors


    # sensors

    i5k_amb-isa-0000

    Adapter: ISA adapter

    Ch. 0 DIMM 0: +61.5°C (low = +97.0°C, high = +124.0°C)

    Ch. 0 DIMM 1: +66.5°C (low = +97.0°C, high = +124.0°C)

    Ch. 0 DIMM 2: +59.0°C (low = +110.5°C, high = +124.0°C)

    Ch. 0 DIMM 3: +57.0°C (low = +110.5°C, high = +124.0°C)

    Ch. 1 DIMM 0: +62.5°C (low = +110.5°C, high = +124.0°C)

    Ch. 1 DIMM 1: +66.5°C (low = +97.0°C, high = +124.0°C)

    Ch. 1 DIMM 2: +64.5°C (low = +110.5°C, high = +124.0°C)

    Ch. 1 DIMM 3: +56.5°C (low = +97.0°C, high = +124.0°C)


    coretemp-isa-0000

    Adapter: ISA adapter

    Core 0: +50.0°C (high = +80.0°C, crit = +100.0°C)

    Core 1: +50.0°C (high = +80.0°C, crit = +100.0°C)


    coretemp-isa-0001

    Adapter: ISA adapter

    Core 0: +39.0°C (high = +80.0°C, crit = +100.0°C)

    Core 1: +39.0°C (high = +80.0°C, crit = +100.0°C)


    So there are 2 CPU's Zones.

    Output of Sensors detect:

    # sensors-detect

    # sensors-detect version 3.6.0

    # System: Intel S5000VSA

    # Kernel: 6.1.0-0.deb11.5-amd64 x86_64

    # Processor: Intel(R) Xeon(R) CPU 5110 @ 1.60GHz (6/15/6)


    Looks to me that the sensor device is: driver i5k_amb

    Is it possibly because there are 2,, anyone else running dual Xeons show both CPU temps ?

    Let me clarify, temps show up in the Sensor widget, just not the temp gauge widget. Just a red block.

  • Dudesplace

    Added the Label resolved

    Thank you Wolf2000, your post resolved the issue.

Participate now!

Don’t have an account yet? Register yourself now and be a part of our community!

Register Yourself Login