Can't Access OMV Server via WebUI or Terminal

After a router problem I had to factory reset my router. I have put all settings and port forwarding back to what they were before. I have internet and everything is back working apart from access to my Server. I have tried pinging the previous address and get this:

``

Request timeout for icmp_seq 0

Request timeout for icmp_seq 1

Request timeout for icmp_seq 2

Request timeout for icmp_seq 3

Request timeout for icmp_seq 4

Request timeout for icmp_seq 5

Request timeout for icmp_seq 6

Request timeout for icmp_seq 7``

I am at a loss of what to do next so any help would be great to give me access again - I am a step by step person so any links or videos are great or if requests to try something be put simply that would help also

Many thanks

I have tried looking at the device list on the router and when I unplug the OMV server box ethernet its the Mac Studio that goes offline. I have rebooted the server and it runs up fine but cant seem to find what device it is - I will try taking everything out apart from the Mac and the Server to the router and see if that works.

Once thats done how can I then gain access?

I have plugged my laptop into my server box but cant seem to access it any ideas?

I have the laptop connected via wifi with the laptop connected ethernet to the server Im getting ``163.254.208.233`` but nothing showing in router

Zitat von ryecoaaron

A monitor and keyboard are likely you only option.

My monitors are HDMI - I don't have HDMI with my HP Proliant GEN 8. Is there no other way that I can access?

Via Terminal on my Mac. For some reason I cant see just the server. Ive noticed that if I disconnect the server from the router it disconnects the Mac from the router Device List. I have at the moment just the Server and Mac connected straight to the router but the Server isnt showing. The server does have iLO on it which I used when I first bought the box.

Im a firefighter and had a long night at work and this is killing me right now - wish I knew more. How does finding a few number hurt your brain so much

Zitat von BernH

There is a mac app called LanScan that may help you as well

Ill try this - I also thought as Im having trouble working out how to get iLO working - Use an old router to see if it comes up

Thanks Ill try finding that out but I did use LanScan and got this which doesnt seem good

But it shows it’s connected but no ip has been assigned right?

I have tried another router to see if I could access it but again its not showing in the device list. The only place I have had it show is in LanScan but with no IP Address. Ive been unable to get iLO working as I cant find the default login for it. Any other help would be great

From memory it was through the iLO I think with a USB in the back and then ran terminal on my Mac - sry for being so simple but it was a long time ago

Thanks - Any chance you can come over

I will see it I can get an old Monitor from somewhere or borrow one and see if I can get access. Once I have that how would I get access?