OMV 6.4.4-1 (Shaitan)
I have a Raspi with two USB drives. The Raspi has two NFS shares, one named OMV, one named PLATTE. I would like to set up a second Raspi that mounts these shares and backs them up.
I first tried the remote mount. The two shares were mounted and I could see them in the CLI, every single file was there. When I tried to create a shared folder it gave an error message 502 with lots of text.
I was a bit annoyed and took the other way I knew. I put both shares in the fstab, above
# >>> [openmediavault]
entered. And that worked.
But I could only create one shared folder, so I mounted the second share below the first share. In the CLI, I can see every file again.
I then defined RSnapshot, source is my shared share called "disk", destination is the backup disk with 2TB called "backup". The total size of data is about 1TB. I started this the first time to copy all files once over the network. It works fine so far, but I keep getting strange emails with the following content:
The system monitoring needs your attention.
Host: Raspi-Backup
Date: Sun, 18 Jun 2023 13:23:16
Service: Raspi-Backup
Event: Resource limit succeeded
Description: loadavg (5min) check succeeded [current loadavg (5min) = 4.0]
This triggered the monitoring system to: alert
I don't even understand the content. I still have space on my target disk
/dev/sdb1 1.8T 435G 1.3T 25% /srv/dev-disk-by-uuid-2db34b29-f2d4-4b06-8e80-0d1ac562e678
In the OMV share there is still 1.3TB free, in the PLATTE share there is 1.5tb free.
Does anyone know what the error message means? What can I do differently?
