Set static IP address -> Web interface unreachable

edmais · Jun 9th 2024

-bash: omv-extras: command not found

is there a particular folder it could be? I have not discarded any files

KM0201 · Jun 9th 2024

Quote from edmais

-bash: omv-extras: command not found
is there a particular folder it could be? I have not discarded any files

Are you running the entire script as I said, or did you just type omv-extras? Below has to be ran as root.. or sudo if you're using a sudo user. This command downloads the script and runs it.

Code

sudo wget -O - https://github.com/OpenMediaVault-Plugin-Developers/packages/raw/master/install | bash

lclcolin · Jun 9th 2024

Quote from dervonnebenaan

Hey guys.

tl;dr: Whenever I set a static IP, I cannot reach the web interface anymore.

Details:
I just installed OMV, connected it to my home LAN and accessed it via the web interface. As advised in the docs, I decided to set a static IP address. Since DHCP had given me 192.168.0.132 and the guide says to pick an address outside of the routers DHCP range, I chose:
IP 10.0.0.2
Subnet 255.255.255.0
Gateway 193.168.0.1

After applying the changes, I was not able to reach the web interface (neither the new nor the old IP). So I plugged in keyboard+monitor and used omv-firstaid to reset the connection. I then tried again with IP 193.168.255.222 , but still no luck.

Any ideas what I'm doing wrong? I never managed to get a grip on this whole ipconfig stuff, so even the most simple and obvious solutions would be appreciated.

[I currently cannot access the routers admin interface because my flatmate has the password and is asleep right now. Hopefully that can be amended tomorrow.]

Display More

you must set like this:

IP 192.168.0.*

Subnet 255.255.255.0

Gateway 192.168.0.1

but not:

IP 10.0.0.2

Subnet 255.255.255.0

Gateway 193.168.0.1

Participate now!