Drivers updates broke my GPU

Hello, I used the update management tool to update my system (intel N100 based). The list of updates included lots of driver updates. After the update, the integrated gpu stopped working (I need it to encoding/decoding video streams) and vaapi command is no longer recognized.

Log of the update is attached.

Do you have any suggestions on how to troubleshoot further and re-enable the GPU driver? Thank you!

Quote from BernH

Check your kernel version. I have an Arc card and need kernel 6.2 or higher for it to work. The stock Debian kernel is 6.1, so I run the proxmox 6.5 kernel.

Thank you for the reply. I have Kernel

Linux 6.1.0-25-amd64

But is it possible that with an update it stopped working what worked before?

Quote from chente

The update has changed many things on your system, including the kernel version from 6.1.0.23 to 6.1.0.25 and also some libraries related to vaapi.

Code

Preparing to unpack .../libva2_2.17.0-1_amd64.deb ...
Unpacking libva2:amd64 (2.17.0-1) ...
Selecting previously unselected package libdrm-intel1:amd64.
Preparing to unpack .../libdrm-intel1_2.4.114-1+b1_amd64.deb ...
Unpacking libdrm-intel1:amd64 (2.4.114-1+b1) ...
Selecting previously unselected package i965-va-driver:amd64.
Preparing to unpack .../i965-va-driver_2.4.1+dfsg1-1_amd64.deb ...
Unpacking i965-va-driver:amd64 (2.4.1+dfsg1-1) ...
Setting up libdrm-intel1:amd64 (2.4.114-1+b1) ...
Setting up libva2:amd64 (2.17.0-1) ...
Setting up i965-va-driver:amd64 (2.4.1+dfsg1-1) ...
Processing triggers for libc-bin (2.36-9+deb12u8) ...
Log ended: 2024-09-10  00:02:30

Display More

As Bernh said, the easiest thing would be to install the openmediavault-kernel plugin and install a kernel higher than 6.1, the N100 GPU works from kernel 6.2 without the need for vaapi, the drivers integrated into the kernel are adequate.

Here you can see how to do it. https://wiki.omv-extras.org/do…=omv6:omv6_plugins:kernel (Note: This document still works without problems in OMV7 even though it was written for OMV6)

Thank you for the reply too. Updating to proxmox kernel 6.2 solved the problem indeed. I tried then to use Kernel 6.5 (since from 6.5 there is support for the wifi and bluetooth device installed in my mini pc, but it fails to install it (logs attached)

Do you have any hint?

Quote from chente

You may have a problem with kernel 6.5. I would try disabling backports if you don't need it (click the button in the System>omv-extras tab) and after that I would install the 6.8 kernel.

I get the same error with 6.8
I update the system and rebooted. I tried disabling backports now, but it didn't make any visible change.

Quote from chente

I would try removing the non-proxmox kernels. Then reboot. Then retry.

Unfortunately no luck even after doing so