Network statistics are not displayed

1st Official Post
    • New

    I have just performed a clean installation of OMV7 on my sbc, namely on the TV box on which the arabian bookworm is installed. The whole installation took about 15-30 minutes and seems to have been successful. The web interface is available, connected disks are displayed in OMV. A small problem is that when I go to Performance Statistics->Networks interfaces, it just displays an empty white screen with no graphs. At the same time, in other places, such as CPU, Memory usage, statistics are displayed normally. I also wanted to clarify that I installed OMV without network settings, because the on my router has configured ip-mac binding for OMV and the ip address of omv is always constant and does not change.


    Code
    wget https://github.com/OpenMediaVault-Plugin-Developers/installScript/raw/master/install
chmod +x install
sudo ./install -n
    • New
    • Official Post

    Probably you need to add the network interface, so that OMV is aware of that interface.


    On which media did you install? If it is an SD card, monitoring is not suggested as it will increase the wear of the SD card and it might be damaged quite fast.

    • New

    Yes, the installation on microsd. According to the wiki, when installing on arm devices, plugin 'flashmemory' is also automatically installed Which should transfer some of the work to RAM instead of writing to microsd/usb-flash, or not?

Participate now!

Don’t have an account yet? Register yourself now and be a part of our community!

Register Yourself Login