Hello, I have problem with completely new Nvme disk KC3000 2TB.
I bought this disk as it has good performance and reviews - I wanted to use it as main storage for frequently used DATA like photos.
During booting the system, I got notification from omv smartd about error on this disk:
QuoteDisplay MoreThis message was generated by the smartd daemon running on:
host name: omv
DNS domain: local
The following warning/error was logged by the smartd daemon:
Device: /dev/disk/by-id/nvme-KINGSTON_SKC3000D2048G_50026B7382DF0CBC, number of Error Log entries increased from 196 to 198
Device info:
KINGSTON SKC3000D2048G, S/N:50026B7382DF0CBC, FW:EIFK31.6, NSID:1, 2.04 TB
For details see host's SYSLOG.
You can also use the smartctl utility for further investigation.
The original message about this issue was sent at Fri Nov 1 16:54:24 2024 CET
Another message will be sent in 24 hours if the problem persists.
What is strange, this message only appears after boot (as I observed) and always after boot quantity of errors increase by 2
I use this disk in Pcie adapter because my motherboard doesn't have such slot, but I've tried 2 adapters and result was the same.
Should I worry about it and store data somewhere else? And send this disk on guarantee?
How can I check it more in details what is causing those errors?
Below about from my smartctl -a for this disk:
=== START OF INFORMATION SECTION ===
Model Number: KINGSTON SKC3000D2048G
Serial Number: 50026B7382DF0CBC
Firmware Version: EIFK31.6
PCI Vendor/Subsystem ID: 0x2646
IEEE OUI Identifier: 0x0026b7
Total NVM Capacity: 2 048 408 248 320 [2,04 TB]
Unallocated NVM Capacity: 0
Controller ID: 1
NVMe Version: 1.4
Number of Namespaces: 1
Namespace 1 Size/Capacity: 2 048 408 248 320 [2,04 TB]
Namespace 1 Formatted LBA Size: 512
Namespace 1 IEEE EUI-64: 0026b7 382df0cbc5
Local Time is: Tue Nov 5 12:47:05 2024 CET
Firmware Updates (0x12): 1 Slot, no Reset required
Optional Admin Commands (0x0017): Security Format Frmw_DL Self_Test
Optional NVM Commands (0x005d): Comp DS_Mngmt Wr_Zero Sav/Sel_Feat Timestmp
Log Page Attributes (0x08): Telmtry_Lg
Maximum Data Transfer Size: 512 Pages
Warning Comp. Temp. Threshold: 84 Celsius
Critical Comp. Temp. Threshold: 89 Celsius
Supported Power States
St Op Max Active Idle RL RT WL WT Ent_Lat Ex_Lat
0 + 8.80W - - 0 0 0 0 0 0
1 + 7.10W - - 1 1 1 1 0 0
2 + 5.20W - - 2 2 2 2 0 0
3 - 0.0620W - - 3 3 3 3 2500 7500
4 - 0.0620W - - 4 4 4 4 2500 7500
Supported LBA Sizes (NSID 0x1)
Id Fmt Data Metadt Rel_Perf
0 + 512 0 2
1 - 4096 0 1
=== START OF SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
SMART/Health Information (NVMe Log 0x02)
Critical Warning: 0x00
Temperature: 24 Celsius
Available Spare: 100%
Available Spare Threshold: 10%
Percentage Used: 0%
Data Units Read: 20 085 113 [10,2 TB]
Data Units Written: 1 751 490 [896 GB]
Host Read Commands: 79 182 938
Host Write Commands: 7 262 212
Controller Busy Time: 424
Power Cycles: 66
Power On Hours: 591
Unsafe Shutdowns: 43
Media and Data Integrity Errors: 0
Error Information Log Entries: 198
Warning Comp. Temperature Time: 0
Critical Comp. Temperature Time: 0
Temperature Sensor 2: 59 Celsius
Error Information (NVMe Log 0x01, 16 of 63 entries)
Num ErrCount SQId CmdId Status PELoc LBA NSID VS
0 198 0 0x3013 0x4004 0x028 0 0 -
1 197 0 0x1010 0x4004 - 0 0 -
). What's interesting, after Your post indeed I found in google topic about this issue. Maybe sometimes just fresh view of situation is needed.