Temperature CPU?
-
- OMV 1.0
- joq3
-
-
I am new at this and am trying to get this plugin to work. My motherboard is an Intel DG45FC running a Intel E7500 Core II Duo. My openmediavault is version 2.2.1 and the openmediavault sensors plugin is version 1.023. I installed the plugin via the webGUI and everything seemed to go fine. LMsensors is installed.
Codesensors coretemp-isa-0000 Adapter: ISA adapter Core 0: +38.0°C (high = +80.0°C, crit = +100.0°C) Core 1: +38.0°C (high = +80.0°C, crit = +100.0°C) ls /var/lib/rrdcached/db/localhost/sensors*/ temperature-temp2.rrd temperature-temp3.rrd
The temps never seem to change though and are always showing +38.0C. The temps do change in the bios though . This not my initial problem though.
My first problem is I have no tabs. Reading a ways back in this thread where others had this issue I noticed I do not have the Sensors.js file but I do have a folder /var/lib/rrdcached/db/localhost/sensors-coretemp-isa-0000 with the files temperature-temp2.rrd temperature-temp3.rrd in it. I reran /usr/share/openmediavault/mkconf/sensors and got no errors but no file or tabs either. Looking at what is my next step?Edit: strangely enough, I have 3 different copies of Sensors.js .
1) /var/www/openmediavault/js/omv/module/admin/service/sensors/Sensors.js
2) /var/www/openmediavault/js/omv/module/admin/dashboard/view/Sensors.js
3) /var/www/openmediavault/js/omv/module/admin/dashboard/part/Sensors.js
Are any of these part of this current plugin or could they be leftovers from some of my previous attempts to install omv-sensors? Should I delete them? -
@Cougar can you run sh -x /usr/share/openmediavault/mkconf/sensors and give me the results. Just so you know, you will need to select the coptin "Show Cores" in the plugin page as you have very limited sensors.
@Redwid @wbsoul I have added your sensors but ATM I am unable to update the package in to a new version.
-
@jhmiller Results of sh -x //mkconf/sensors http://pastebin.com/102r49dFcc
I assume that once I have the tabs working I'll see the options on the plugin page so I can select "Show Cores"
-
-
@jhmiller Results of sh -x //mkconf/sensors http://pastebin.com/102r49dFcc
I assume that once I have the tabs working I'll see the options on the plugin page so I can select "Show Cores"
The options should show up under the plugin's page, if you can not see it you may need to refresh your browser page, delete your browser cache or maybe try uninstalling and reinstalling the plugin (try each one in turn)
You will not get any graphs until you set your settings via the plugin page. -
OK, found it under the "Services" tab and optioned it for CPU only. Saved, applied, and refreshed. Still no tabs or graphs even though Sensors.js is now in the /var/www/openmediavault/js/omv/module/admin/diagnostic/system/plugin/
-
Diagnostics | System Information | OMV Sensors
-
OK, a reboot and it seems to be working now. Thanks jmiller for your assistance. I am now waiting to see if the core temps show anything different than the 38.0 C they show on the CLI. Thanks again!!
-
HI all
where download last version this plugin... i 've installed last version OMV, but there is not this plugin... I have only found 1.0.5 version.... -
HI all
where download last version this plugin... i 've installed last version OMV, but there is not this plugin... I have only found 1.0.5 version....Hi there.
If you want to download the newest sensors plugin you must enable the "Download Managers Testing" in OMV-Extras.org plugin and refresh the repo.I install the new 1.23 sensors plugin but i have sad faces
root@SERWER:~# ls -l /var/lib/rrdcached/db/localhost/sensors-*/
/var/lib/rrdcached/db/localhost/sensors-dme1737-i2c-1-2c/:
razem 1776
-rw-r--r-- 1 root root 148648 kwi 14 08:04 fanspeed-fan1.rrd
-rw-r--r-- 1 root root 148648 kwi 14 08:04 fanspeed-fan2.rrd
-rw-r--r-- 1 root root 148648 kwi 14 08:04 temperature-temp1.rrd
-rw-r--r-- 1 root root 148648 kwi 14 08:04 temperature-temp2.rrd
-rw-r--r-- 1 root root 148648 kwi 14 08:04 temperature-temp3.rrd
-rw-r--r-- 1 root root 148648 kwi 14 08:04 voltage-in0.rrd
-rw-r--r-- 1 root root 148648 kwi 14 08:04 voltage-in1.rrd
-rw-r--r-- 1 root root 148648 kwi 14 08:04 voltage-in2.rrd
-rw-r--r-- 1 root root 148648 kwi 14 08:04 voltage-in3.rrd
-rw-r--r-- 1 root root 148648 kwi 14 08:04 voltage-in4.rrd
-rw-r--r-- 1 root root 148648 kwi 14 08:04 voltage-in5.rrd
-rw-r--r-- 1 root root 148648 kwi 14 08:04 voltage-in6.rrd/var/lib/rrdcached/db/localhost/sensors-emc6d103-i2c-1-2d/:
razem 1776
-rw-r--r-- 1 root root 148648 kwi 14 08:04 fanspeed-fan1.rrd
-rw-r--r-- 1 root root 148648 kwi 14 08:04 fanspeed-fan2.rrd
-rw-r--r-- 1 root root 148648 kwi 14 08:04 fanspeed-fan3.rrd
-rw-r--r-- 1 root root 148648 kwi 14 08:04 fanspeed-fan4.rrd
-rw-r--r-- 1 root root 148648 kwi 14 08:04 temperature-temp1.rrd
-rw-r--r-- 1 root root 148648 kwi 14 08:04 temperature-temp2.rrd
-rw-r--r-- 1 root root 148648 kwi 14 08:04 temperature-temp3.rrd
-rw-r--r-- 1 root root 148648 kwi 14 08:04 voltage-in0.rrd
-rw-r--r-- 1 root root 148648 kwi 14 08:04 voltage-in1.rrd
-rw-r--r-- 1 root root 148648 kwi 14 08:04 voltage-in2.rrd
-rw-r--r-- 1 root root 148648 kwi 14 08:04 voltage-in3.rrd
-rw-r--r-- 1 root root 148648 kwi 14 08:04 voltage-in4.rrd/var/lib/rrdcached/db/localhost/sensors-emc6d103-i2c-1-2e/:
razem 1776
-rw-r--r-- 1 root root 148648 kwi 14 08:04 fanspeed-fan1.rrd
-rw-r--r-- 1 root root 148648 kwi 14 08:04 fanspeed-fan2.rrd
-rw-r--r-- 1 root root 148648 kwi 14 08:04 fanspeed-fan3.rrd
-rw-r--r-- 1 root root 148648 kwi 14 08:04 fanspeed-fan4.rrd
-rw-r--r-- 1 root root 148648 kwi 14 08:04 temperature-temp1.rrd
-rw-r--r-- 1 root root 148648 kwi 14 08:04 temperature-temp2.rrd
-rw-r--r-- 1 root root 148648 kwi 14 08:04 temperature-temp3.rrd
-rw-r--r-- 1 root root 148648 kwi 14 08:04 voltage-in0.rrd
-rw-r--r-- 1 root root 148648 kwi 14 08:04 voltage-in1.rrd
-rw-r--r-- 1 root root 148648 kwi 14 08:04 voltage-in2.rrd
-rw-r--r-- 1 root root 148648 kwi 14 08:04 voltage-in3.rrd
-rw-r--r-- 1 root root 148648 kwi 14 08:04 voltage-in4.rrdsensors
emc6d103-i2c-1-2d
Adapter: SMBus nForce2 adapter at 2e00
in0: +1.80 V (min = +0.00 V, max = +3.32 V)
Vcore: +1.12 V (min = +0.00 V, max = +2.99 V)
+3.3V: +3.24 V (min = +2.97 V, max = +3.63 V)
+5V: +4.99 V (min = +4.50 V, max = +5.50 V)
+12V: +11.89 V (min = +0.00 V, max = +15.94 V)
fan1: 4268 RPM (min = 0 RPM)
fan2: 0 RPM (min = 0 RPM)
fan3: 0 RPM (min = 0 RPM)
fan4: 0 RPM (min = 0 RPM)
temp1: +28.8°C (low = -127.0°C, high = +127.0°C)
M/B Temp: +24.5°C (low = -127.0°C, high = +127.0°C)
temp3: +34.7°C (low = -127.0°C, high = +127.0°C)
cpu0_vid: +1.550 Vemc6d103-i2c-1-2e
Adapter: SMBus nForce2 adapter at 2e00
in0: +1.80 V (min = +0.00 V, max = +3.32 V)
Vcore: +0.95 V (min = +0.00 V, max = +2.99 V)
+3.3V: +3.24 V (min = +2.97 V, max = +3.63 V)
+5V: +4.99 V (min = +4.50 V, max = +5.50 V)
+12V: +11.92 V (min = +0.00 V, max = +15.94 V)
fan1: 7637 RPM (min = 0 RPM)
fan2: 7022 RPM (min = 0 RPM)
fan3: 4278 RPM (min = 0 RPM)
fan4: 4248 RPM (min = 0 RPM)
temp1: +24.2°C (low = -127.0°C, high = +127.0°C)
M/B Temp: +25.2°C (low = -127.0°C, high = +127.0°C)
temp3: +30.6°C (low = -127.0°C, high = +127.0°C)
cpu0_vid: +1.550 VJhmiller can you add my sensors to the script ?
Maybe you cane wrote an instruction how to add a new sensors to the script so every body can do this. -
My cat /proc/cpuinfo
processor : 0
vendor_id : AuthenticAMD
cpu family : 16
model : 4
model name : Quad-Core AMD Opteron(tm) Processor 2372 HE
stepping : 2
microcode : 0x10000db
cpu MHz : 800.000
cache size : 512 KB
physical id : 0
siblings : 4
core id : 0
cpu cores : 4
apicid : 0
initial apicid : 0
fpu : yes
fpu_exception : yes
cpuid level : 5
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush mmx fxsr sse sse2 ht syscall nx mmxext fxsr_opt pdpe1gb rdtscp lm 3dnowext 3dnow constant_tsc rep_good nopl nonstop_tsc extd_apicid pni monitor cx16 popcnt lahf_lm cmp_legacy svm extapic cr8_legacy abm sse4a misalignsse 3dnowprefetch osvw ibs skinit wdt hw_pstate npt lbrv svm_lock nrip_save vmmcall
bogomips : 4200.34
TLB size : 1024 4K pages
clflush size : 64
cache_alignment : 64
address sizes : 48 bits physical, 48 bits virtual
power management: ts ttp tm stc 100mhzsteps hwpstateprocessor : 1
vendor_id : AuthenticAMD
cpu family : 16
model : 4
model name : Quad-Core AMD Opteron(tm) Processor 2372 HE
stepping : 2
microcode : 0x10000db
cpu MHz : 800.000
cache size : 512 KB
physical id : 0
siblings : 4
core id : 1
cpu cores : 4
apicid : 1
initial apicid : 1
fpu : yes
fpu_exception : yes
cpuid level : 5
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush mmx fxsr sse sse2 ht syscall nx mmxext fxsr_opt pdpe1gb rdtscp lm 3dnowext 3dnow constant_tsc rep_good nopl nonstop_tsc extd_apicid pni monitor cx16 popcnt lahf_lm cmp_legacy svm extapic cr8_legacy abm sse4a misalignsse 3dnowprefetch osvw ibs skinit wdt hw_pstate npt lbrv svm_lock nrip_save vmmcall
bogomips : 4200.18
TLB size : 1024 4K pages
clflush size : 64
cache_alignment : 64
address sizes : 48 bits physical, 48 bits virtual
power management: ts ttp tm stc 100mhzsteps hwpstateprocessor : 2
vendor_id : AuthenticAMD
cpu family : 16
model : 4
model name : Quad-Core AMD Opteron(tm) Processor 2372 HE
stepping : 2
microcode : 0x10000db
cpu MHz : 800.000
cache size : 512 KB
physical id : 0
siblings : 4
core id : 2
cpu cores : 4
apicid : 2
initial apicid : 2
fpu : yes
fpu_exception : yes
cpuid level : 5
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush mmx fxsr sse sse2 ht syscall nx mmxext fxsr_opt pdpe1gb rdtscp lm 3dnowext 3dnow constant_tsc rep_good nopl nonstop_tsc extd_apicid pni monitor cx16 popcnt lahf_lm cmp_legacy svm extapic cr8_legacy abm sse4a misalignsse 3dnowprefetch osvw ibs skinit wdt hw_pstate npt lbrv svm_lock nrip_save vmmcall
bogomips : 4200.19
TLB size : 1024 4K pages
clflush size : 64
cache_alignment : 64
address sizes : 48 bits physical, 48 bits virtual
power management: ts ttp tm stc 100mhzsteps hwpstateprocessor : 3
vendor_id : AuthenticAMD
cpu family : 16
model : 4
model name : Quad-Core AMD Opteron(tm) Processor 2372 HE
stepping : 2
microcode : 0x10000db
cpu MHz : 800.000
cache size : 512 KB
physical id : 0
siblings : 4
core id : 3
cpu cores : 4
apicid : 3
initial apicid : 3
fpu : yes
fpu_exception : yes
cpuid level : 5
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush mmx fxsr sse sse2 ht syscall nx mmxext fxsr_opt pdpe1gb rdtscp lm 3dnowext 3dnow constant_tsc rep_good nopl nonstop_tsc extd_apicid pni monitor cx16 popcnt lahf_lm cmp_legacy svm extapic cr8_legacy abm sse4a misalignsse 3dnowprefetch osvw ibs skinit wdt hw_pstate npt lbrv svm_lock nrip_save vmmcall
bogomips : 4200.18
TLB size : 1024 4K pages
clflush size : 64
cache_alignment : 64
address sizes : 48 bits physical, 48 bits virtual
power management: ts ttp tm stc 100mhzsteps hwpstateprocessor : 4
vendor_id : AuthenticAMD
cpu family : 16
model : 4
model name : Quad-Core AMD Opteron(tm) Processor 2372 HE
stepping : 2
microcode : 0x10000db
cpu MHz : 2100.000
cache size : 512 KB
physical id : 1
siblings : 4
core id : 0
cpu cores : 4
apicid : 4
initial apicid : 4
fpu : yes
fpu_exception : yes
cpuid level : 5
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush mmx fxsr sse sse2 ht syscall nx mmxext fxsr_opt pdpe1gb rdtscp lm 3dnowext 3dnow constant_tsc rep_good nopl nonstop_tsc extd_apicid pni monitor cx16 popcnt lahf_lm cmp_legacy svm extapic cr8_legacy abm sse4a misalignsse 3dnowprefetch osvw ibs skinit wdt hw_pstate npt lbrv svm_lock nrip_save vmmcall
bogomips : 4200.20
TLB size : 1024 4K pages
clflush size : 64
cache_alignment : 64
address sizes : 48 bits physical, 48 bits virtual
power management: ts ttp tm stc 100mhzsteps hwpstateprocessor : 5
vendor_id : AuthenticAMD
cpu family : 16
model : 4
model name : Quad-Core AMD Opteron(tm) Processor 2372 HE
stepping : 2
microcode : 0x10000db
cpu MHz : 800.000
cache size : 512 KB
physical id : 1
siblings : 4
core id : 1
cpu cores : 4
apicid : 5
initial apicid : 5
fpu : yes
fpu_exception : yes
cpuid level : 5
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush mmx fxsr sse sse2 ht syscall nx mmxext fxsr_opt pdpe1gb rdtscp lm 3dnowext 3dnow constant_tsc rep_good nopl nonstop_tsc extd_apicid pni monitor cx16 popcnt lahf_lm cmp_legacy svm extapic cr8_legacy abm sse4a misalignsse 3dnowprefetch osvw ibs skinit wdt hw_pstate npt lbrv svm_lock nrip_save vmmcall
bogomips : 4200.21
TLB size : 1024 4K pages
clflush size : 64
cache_alignment : 64
address sizes : 48 bits physical, 48 bits virtual
power management: ts ttp tm stc 100mhzsteps hwpstateprocessor : 6
vendor_id : AuthenticAMD
cpu family : 16
model : 4
model name : Quad-Core AMD Opteron(tm) Processor 2372 HE
stepping : 2
microcode : 0x10000db
cpu MHz : 800.000
cache size : 512 KB
physical id : 1
siblings : 4
core id : 2
cpu cores : 4
apicid : 6
initial apicid : 6
fpu : yes
fpu_exception : yes
cpuid level : 5
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush mmx fxsr sse sse2 ht syscall nx mmxext fxsr_opt pdpe1gb rdtscp lm 3dnowext 3dnow constant_tsc rep_good nopl nonstop_tsc extd_apicid pni monitor cx16 popcnt lahf_lm cmp_legacy svm extapic cr8_legacy abm sse4a misalignsse 3dnowprefetch osvw ibs skinit wdt hw_pstate npt lbrv svm_lock nrip_save vmmcall
bogomips : 4200.20
TLB size : 1024 4K pages
clflush size : 64
cache_alignment : 64
address sizes : 48 bits physical, 48 bits virtual
power management: ts ttp tm stc 100mhzsteps hwpstateprocessor : 7
vendor_id : AuthenticAMD
cpu family : 16
model : 4
model name : Quad-Core AMD Opteron(tm) Processor 2372 HE
stepping : 2
microcode : 0x10000db
cpu MHz : 800.000
cache size : 512 KB
physical id : 1
siblings : 4
core id : 3
cpu cores : 4
apicid : 7
initial apicid : 7
fpu : yes
fpu_exception : yes
cpuid level : 5
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush mmx fxsr sse sse2 ht syscall nx mmxext fxsr_opt pdpe1gb rdtscp lm 3dnowext 3dnow constant_tsc rep_good nopl nonstop_tsc extd_apicid pni monitor cx16 popcnt lahf_lm cmp_legacy svm extapic cr8_legacy abm sse4a misalignsse 3dnowprefetch osvw ibs skinit wdt hw_pstate npt lbrv svm_lock nrip_save vmmcall
bogomips : 4200.21
TLB size : 1024 4K pages
clflush size : 64
cache_alignment : 64
address sizes : 48 bits physical, 48 bits virtual
power management: ts ttp tm stc 100mhzsteps hwpstate -
-
One machine with 2 sensors. one sensors read 1 cpu and half a fan ports and second reads cpu 2 and second half fan ports
description: Motherboard
product: S2932/S2932-E/S2932-SI
vendor: TYAN Computer Corporation -
sensors
emc6d103-i2c-1-2d
Adapter: SMBus nForce2 adapter at 2e00
in0: +1.80 V (min = +0.00 V, max = +3.32 V)
Vcore: +1.12 V (min = +0.00 V, max = +2.99 V)
+3.3V: +3.24 V (min = +2.97 V, max = +3.63 V)
+5V: +4.99 V (min = +4.50 V, max = +5.50 V)
+12V: +11.89 V (min = +0.00 V, max = +15.94 V)
fan1: 4268 RPM (min = 0 RPM) -- Chasis FAN
fan2: 0 RPM (min = 0 RPM)
fan3: 0 RPM (min = 0 RPM)
fan4: 0 RPM (min = 0 RPM)
temp1: +28.8°C (low = -127.0°C, high = +127.0°C)
M/B Temp: +24.5°C (low = -127.0°C, high = +127.0°C)
temp3: +34.7°C (low = -127.0°C, high = +127.0°C) -- IS CPU 2 TEMP
cpu0_vid: +1.550 Vemc6d103-i2c-1-2e
Adapter: SMBus nForce2 adapter at 2e00
in0: +1.80 V (min = +0.00 V, max = +3.32 V)
Vcore: +0.95 V (min = +0.00 V, max = +2.99 V)
+3.3V: +3.24 V (min = +2.97 V, max = +3.63 V)
+5V: +4.99 V (min = +4.50 V, max = +5.50 V)
+12V: +11.92 V (min = +0.00 V, max = +15.94 V)
fan1: 7637 RPM (min = 0 RPM) --CPU 2 Fan i think
fan2: 7022 RPM (min = 0 RPM) -- CPU 1 Fan i think
fan3: 4278 RPM (min = 0 RPM) --Chasis FAN
fan4: 4248 RPM (min = 0 RPM)-- Chasis FAN
temp1: +24.2°C (low = -127.0°C, high = +127.0°C)
M/B Temp: +25.2°C (low = -127.0°C, high = +127.0°C)
temp3: +30.6°C (low = -127.0°C, high = +127.0°C) --CPU 1 TEMP
cpu0_vid: +1.550 V -
So this will need a little work
The plugin is designed to show 1 cpu and any cores in that cpu, the same goes for the cpu fan but you have 2 of each.
Give me a few days and i will see what I can come up with. -
thanks you a lot.
-
Code
rm /usr/share/openmediavault/mkconf/sensors wget -O /usr/share/openmediavault/mkconf/sensors https://raw.githubusercontent.com/OpenMediaVault-Plugin-Developers/openmediavault-sensors/master/usr/share/openmediavault/mkconf/sensors chmod +x /usr/share/openmediavault/mkconf/sensors /usr/share/openmediavault/mkconf/sensors
Try the above to pull the latest version of the script, try enabling just the cpu graphs to start with.
If you have issues could you give the output off sh -x /usr/share/openmediavault/mkconf/sensors
-
Hello again.
When i put the new script and try to start cpu temp i have error messageCode
Alles anzeigenBłąd #4000: exception 'OMVException' with message 'Failed to execute command 'omv-mkconf sensors balls 2>&1': /usr/share/openmediavault/mkconf/sensors: 479: cd: can't cd to /var/lib/rrdcached/db/localhost/sensors-emc6d103' in /usr/share/openmediavault/engined/module/sensors.inc:55 Stack trace: #0 /usr/share/openmediavault/engined/rpc/config.inc(180): OMVModuleSensors->applyConfig() #1 [internal function]: OMVRpcServiceConfig->applyChanges(Array, Array) #2 /usr/share/php/openmediavault/rpcservice.inc(125): call_user_func_array(Array, Array) #3 /usr/share/php/openmediavault/rpcservice.inc(158): OMVRpcServiceAbstract->callMethod('applyChanges', Array, Array) #4 /usr/share/openmediavault/engined/rpc/config.inc(224): OMVRpcServiceAbstract->callMethodBg('applyChanges', Array, Array) #5 [internal function]: OMVRpcServiceConfig->applyChangesBg(Array, Array) #6 /usr/share/php/openmediavault/rpcservice.inc(125): call_user_func_array(Array, Array) #7 /usr/share/php/openmediavault/rpc.inc(79): OMVRpcServiceAbstract->callMethod('applyChangesBg', Array, Array) #8 /usr/sbin/omv-engined(500): OMVRpc::exec('Config', 'applyChangesBg', Array, Array, 1) #9 {main}
-
Pushed a new version, try the above command again.
Jetzt mitmachen!
Sie haben noch kein Benutzerkonto auf unserer Seite? Registrieren Sie sich kostenlos und nehmen Sie an unserer Community teil!