Issues after upgrade OMV 7 to 8

Hi,

i need help for two issues after OMV 7 to 8 upgrade.

1.- mdmonitor stops works:

dic 13 08:35:39 nas systemd[1]: Started mdmonitor.service - MD array monitor.

dic 13 08:35:39 nas mdadm[791]: mdadm: No mail address or alert command - not monitoring.

dic 13 08:35:39 nas systemd[1]: mdmonitor.service: Main process exited, code=exited, status=1/FAILU>

dic 13 08:35:39 nas systemd[1]: mdmonitor.service: Failed with result 'exit-code'.

MAILADDR is configured in mdadm.conf

In anacron email:

/etc/cron.daily/openmediavault-mdadm:

mdadm: No mail address or alert command - not monitoring.

run-parts: /etc/cron.daily/openmediavault-mdadm exited with return code 1

2.- Source list:

In anacron email

/etc/cron.daily/openmediavault-apticron:

W:

https://deb.nodesource.com/nod…dists/bullseye/InRelease: Policy will reject signature within a year, see --audit for details

/etc/cron.daily/openmediavault-mdadm:

mdadm: No mail address or alert command - not monitoring.

run-parts: /etc/cron.daily/openmediavault-mdadm exited with return code 1

Thank you in advance.

Quote from votdev

In OMV8 please run omv-salt deploy run mdadm and reboot.

I've OMV 8.0-12 and openmediavault-md 8.0-3, i ran "omv-salt deploy run mdadm" and reboot with no result.

Sorry but updated to openmediavault-md 8.0-4 not solved

dpkg -l | grep mdadm

ii  mdadm           4.4-11        amd64        tool for managing Linux MD devices (software RAID)

mdadm.conf

# This file is auto-generated by openmediavault (https://www.openmediavault.org)# WARNING: Do not edit this file, your changes will get lost.# mdadm.conf## Please refer to mdadm.conf(5) for information about this file.## by default, scan all partitions (/proc/partitions) for MD superblocks.# alternatively, specify devices to scan, using wildcards if desired.# Note, if no DEVICE line is present, then "DEVICE partitions" is assumed.# To avoid the auto-assembly of RAID devices a pattern that CAN'T match is# used if no RAID devices are configured.DEVICE partitions
# auto-create devices with Debian standard permissions
CREATE owner=root group=disk mode=0660 auto=yes
# automatically tag new arrays as belonging to the local system
HOMEHOST <system>
# instruct the monitoring daemon where to send mail alerts
MAILADDR m*****el@********.com
MAILFROM root
# definitions of existing MD arrays
ARRAY /dev/md/0 metadata=1.2 UUID=66*****1:334e*****:ad****5a:53*****d0

Ok, thank you for your time.

It's still the same.

Good news,

using this works fine

mdadm --monitor --scan --daemonize --mail=m***l@can********a.com

I created a task that runs on every restart and the problem is solved.