ASRock E350M1 based


  • It's a common debian-installer bug. Select english language at the first screen and the error is gone :)

  • If i choose english language ALL IS WELL !!!!! :thumbup:
    Now i have done a clean installation of OMV 1.0.20 from CD on Kingston SSD 128Gb and all is OK 8o
    After installation i have english language and i don't see were can i change that but doesn't matter.
    I make all the update that the system give me and now i have OMV 1.0.29 installed in italian language automatically!
    It seems all OK, the only doubt i have is in the SYSLOG because continues to generate this:



    Is this normal or not????


    Thanx on advance!

  • Now i don't have here an HDD then i tried with a USB 8Gb pendrive
    I prepared in ext4 and then i mounted it.
    NOW MY SYSLOG IS CLEAN !!!!! 8o


    SO THANX A LOT TO TEKKB, SUBZERO79, DUDU371 AND ALL THE OTHERS WHO HELPED ME! :)


    I'M REALLY GLAD!!!!!!!! :thumbup:

  • fyi - zippi, the whole reason i built a new system was, i couldn't install 0.5x.
    It kept crashing part way through the CD install and i couldn't get USB Stick to boot on that system.


    I built a new system from scratch and used USB Stick for installing. It is also true, i built the system with only system drive, configured everything in the base system and then installed the data drive.

    • Offizieller Beitrag

    If you install the backports kernel from omv-extras, the backports repo is added.

    omv 7.0.4-2 sandworm | 64 bit | 6.5 proxmox kernel

    plugins :: omvextrasorg 7.0 | kvm 7.0.10 | compose 7.1.2 | k8s 7.0-6 | cputemp 7.0 | mergerfs 7.0.3


    omv-extras.org plugins source code and issue tracker - github


    Please try ctrl-shift-R and read this before posting a question.

    Please put your OMV system details in your signature.
    Please don't PM for support... Too many PMs!

  • fyi - zippi, the whole reason i built a new system was, i couldn't install 0.5x.
    It kept crashing part way through the CD install and i couldn't get USB Stick to boot on that system.


    I built a new system from scratch and used USB Stick for installing. It is also true, i built the system with only system drive, configured everything in the base system and then installed the data drive.


    Yes, with an old previously system i had the same problem.
    Then i went in BIOS to disable SERIAL PORT and all was OK!

  • i tried that - disabling serial on with prior version, but it didn't work. i had to go back to v0.2 i think, installed and upgraded to get up todate.
    but i had instability problems with that mb, so bit the bullet and got the asrock and couldn't be happier.......save for when i finally get openkm working properly.....

Jetzt mitmachen!

Sie haben noch kein Benutzerkonto auf unserer Seite? Registrieren Sie sich kostenlos und nehmen Sie an unserer Community teil!