Cubox-I4 Pro and OMV

  • Install minimal Debian Wheezy from here. Then do the following:


    Code
    echo "deb http://packages.openmediavault.org/public kralizec main" > /etc/apt/sources.list.d/openmediavault.list
    apt-get update
    apt-get install openmediavault-keyring postfix
    apt-get update
    apt-get install openmediavault
    omv-initsystem


    If you can't get it working, I probably can make an image.

    omv 5.6.4 usul | 64 bit | 5.11 proxmox kernel | omvextrasorg 5.6
    omv-extras.org plugins source code and issue tracker - github


    Please read this before posting a question.
    Please don't PM for support... Too many PMs!

  • The lan port does work with that image but doesn't have it configured. Glad you got it working :)

    omv 5.6.4 usul | 64 bit | 5.11 proxmox kernel | omvextrasorg 5.6
    omv-extras.org plugins source code and issue tracker - github


    Please read this before posting a question.
    Please don't PM for support... Too many PMs!

  • I tried to upgrade and failed miserably. Now whatever I try results in


    The following packages have unmet dependencies:
    openmediavault : Depends: php5-pam but it is not going to be installed
    Depends: proftpd-mod-vroot but it is not going to be installed
    Depends: php5-proctitle but it is not going to be installed


    Any way to solve this or maybe anyone willing to make an image, preferably the OMV version 2? Thanks in advance.

  • Updating my image and will upload it to sourceforge.

    omv 5.6.4 usul | 64 bit | 5.11 proxmox kernel | omvextrasorg 5.6
    omv-extras.org plugins source code and issue tracker - github


    Please read this before posting a question.
    Please don't PM for support... Too many PMs!

  • I forgot to check the kernel. It does not have mdadm or port multiplier enabled. I will look for another kernel or make a new one. Until then, you could use multiple usb hard drives or a usb external enclosure that supports multiple drives.

    omv 5.6.4 usul | 64 bit | 5.11 proxmox kernel | omvextrasorg 5.6
    omv-extras.org plugins source code and issue tracker - github


    Please read this before posting a question.
    Please don't PM for support... Too many PMs!

  • Better image coming using much newer kernel with port multiplier and mdadm raid support.

    omv 5.6.4 usul | 64 bit | 5.11 proxmox kernel | omvextrasorg 5.6
    omv-extras.org plugins source code and issue tracker - github


    Please read this before posting a question.
    Please don't PM for support... Too many PMs!

  • New image is on sourceforge. Raid and port multiplier working nicely.

    omv 5.6.4 usul | 64 bit | 5.11 proxmox kernel | omvextrasorg 5.6
    omv-extras.org plugins source code and issue tracker - github


    Please read this before posting a question.
    Please don't PM for support... Too many PMs!

  • Impressive. Speed test on a three drive raid 0 array in an esata enclosure. Too bad the network port can only go to 480 mbps.


    Code
    root@cubox-i:~# dd if=/dev/zero of=/dev/md0 bs=1M conv=fdatasync count=4000
    4000+0 records in
    4000+0 records out
    4194304000 bytes (4.2 GB) copied, 46.7811 s, 89.7 MB/s

    omv 5.6.4 usul | 64 bit | 5.11 proxmox kernel | omvextrasorg 5.6
    omv-extras.org plugins source code and issue tracker - github


    Please read this before posting a question.
    Please don't PM for support... Too many PMs!

  • 1. Forgot to put them in the stoneburner repos. Should be there now.


    2. Once your system is setup, put the sd card in the computer you wrote it with. If you are using Windows, use win32diskimager but select the read option. If you are using linux, use dd (same command as writing but reverse it and give a different file name).

    omv 5.6.4 usul | 64 bit | 5.11 proxmox kernel | omvextrasorg 5.6
    omv-extras.org plugins source code and issue tracker - github


    Please read this before posting a question.
    Please don't PM for support... Too many PMs!

  • Been having some troubles. I try to expand the partition from 2 GB to about 50 GB but it's not working out well. Tried several proggies, including Gparted but it won't allow me to expand the Cubox-i partition while I have over 57 GB free space on the card. Any idea how to expand ext4 partitions in windows? Running VM ubuntu via Hyper-V but that won't let me mount usb sticks nor cards...

  • You shouldn't be expand any partition on the cubox-i image because you can't use the space anyway. Just create another partition in the free space and format it ext4. Then you can mount that partition in the web interface and use it for shared folders.

    omv 5.6.4 usul | 64 bit | 5.11 proxmox kernel | omvextrasorg 5.6
    omv-extras.org plugins source code and issue tracker - github


    Please read this before posting a question.
    Please don't PM for support... Too many PMs!

Participate now!

Don’t have an account yet? Register yourself now and be a part of our community!