When I'm connected from outside to my VPN, I can ping the printer but I cannot print anything : 'printer not connected'.
I tried also to access to to a shared folder from a PC at home but I can't.
In fact, I found the solution on http://www.supinfo.com/article…imprimante-reseau-windows.
It works !
Hello !
I'm not an expert in networks and I'm pretty sure that someone will know the answer.
Here it is my question...
I've installed OMV 3.0.63 on a RPI3.
I've installed OpenVPN through Pivpn installation script (too much problems with the plugins OpenVpn in OMV)
I've started OpenVpn on my laptop and it's fine.
At home, where my RPI3 is located, I've got a printer, connected to my local network by wifi.
I'd like to print something on it from outside, through the VPN.
Can someone tells me how to do it ?
Many thanks in advance for the answers...
I found the error. The redirection port was not correctly done.
Thanks for the info Davidh2k, the installation was done without errors....
After that, I've filled the OpenVpn parameters in the OMV web configuration page / Services section :
General parameters :
- Activate : on
- Port : 11948
- Protocole : UDP
- Use compression : on
- PAM : on
- Options : blank
- Logging level : Normal usage output
VPN network :
Address : 10.8.0.0
Mask : 255.255.255.0
Gateway interface : eth0
Default gateway : on
Client to client : on
DHCP options :
DNS server(s) : 192.168.50.1 <-- my router ip
DNS search : google.ca
WINS server)s) : blank
Public :
Public address : <my IP>
Then, I've created a certificate with a user I've created in OMV and I've downloaded it.
I've started the software OpenVPN on my laptop (windows 7 64 bits).
I've imported the ovpn file downloaded in the previous step.
I tried to connect to OMV vpn and this is the log :
Sat Apr 08 08:30:31 2017 MANAGEMENT: CMD 'echo all on'
Sat Apr 08 08:30:31 2017 MANAGEMENT: CMD 'hold off'
Sat Apr 08 08:30:31 2017 MANAGEMENT: CMD 'hold release'
Sat Apr 08 08:30:38 2017 MANAGEMENT: CMD 'username "Auth" "pi"'
Sat Apr 08 08:30:38 2017 MANAGEMENT: CMD 'password [...]'
Sat Apr 08 08:30:38 2017 WARNING: --ns-cert-type is DEPRECATED. Use --remote-cert-tls instead.
Sat Apr 08 08:30:38 2017 TCP/UDP: Preserving recently used remote address: [AF_INET]<my IP>:11948
Sat Apr 08 08:30:38 2017 Socket Buffers: R=[8192->8192] S=[8192->8192]
Sat Apr 08 08:30:38 2017 UDP link local: (not bound)
Sat Apr 08 08:30:38 2017 UDP link remote: [AF_INET]<my IP>:11948
Sat Apr 08 08:30:38 2017 MANAGEMENT: >STATE:1491654638,WAIT,,,,,,
Sat Apr 08 08:31:38 2017 TLS Error: TLS key negotiation failed to occur within 60 seconds (check your network connectivity)
Sat Apr 08 08:31:38 2017 TLS Error: TLS handshake failed
Sat Apr 08 08:31:38 2017 SIGUSR1[soft,tls-error] received, process restarting
Sat Apr 08 08:31:38 2017 MANAGEMENT: >STATE:1491654698,RECONNECTING,tls-error,,,,,
Do you have an idea why I've got the error 'TLS Error: TLS key negotiation failed to occur within 60 seconds (check your network connectivity)' ?
Many thanks.
Hello !
I've got many erros when I try to install the plugins OpenMediavault-Openvpn 3.0.6 on my RPI3.
Find below what I've done :
- write in a SD card the image OpenMediaVault v3.0.63
- do an apt-get update
- do an apt-get upgrade
- Access to the web page configuration of OMV (192.168.XXX.XXX)
- Activate the repo Plexmediaserver (because I've red in this forum that we need it for OMV-Openvpn)
- Install the plugins Oenmediavault-Openvpn 3.0.6
And then, I got ERRORS.
Find below a copy of the installation log.
Reading package lists...
Building dependency tree...
Reading state information...
The following packages were automatically installed and are no longer required:
python3-sysv-ipc tftpd-hpa
Use 'apt-get autoremove' to remove them.
The following extra packages will be installed:
easy-rsa jq libpkcs11-helper1 openmediavault openvpn
Recommended packages:
opensc
The following NEW packages will be installed:
easy-rsa jq libpkcs11-helper1 openmediavault-openvpn openvpn
The following packages will be upgraded:
openmediavault
1 upgraded, 5 newly installed, 0 to remove and 2 not upgraded.
Need to get 1526 kB of archives.
After this operation, 1542 kB of additional disk space will be used.
Get:1 http://packages.openmediavault.org/public/ erasmus/main openmediavault all 3.0.69 [910 kB]
Get:2 http://mirrordirector.raspbian.org/raspbian/ jessie/main libpkcs11-helper1 armhf 1.11-2 [39.4 kB]
Get:3 http://mirrordirector.raspbian.org/raspbian/ jessie/main jq armhf 1.4-2.1+deb8u1 [97.2 kB]
Get:4 https://dl.bintray.com/openmed…lugin-developers/erasmus/ jessie/main openmediavault-openvpn all 3.0.6 [27.8 kB]
Get:5 http://mirrordirector.raspbian.org/raspbian/ jessie/main easy-rsa all 2.2.2-1 [17.1 kB]
Get:6 http://mirrordirector.raspbian.org/raspbian/ jessie/main openvpn armhf 2.3.4-5+deb8u1 [435 kB]
Preconfiguring packages ...
Fetched 1526 kB in 1s (855 kB/s)
Selecting previously unselected package libpkcs11-helper1:armhf.
(Reading database ... (Reading database ... 5%(Reading database ... 10%(Reading database ... 15%(Reading database ... 20%(Reading database ... 25%(Reading database ... 30%(Reading database ... 35%(Reading database ... 40%(Reading database ... 45%(Reading database ... 50%(Reading database ... 55%(Reading database ... 60%(Reading database ... 65%(Reading database ... 70%(Reading database ... 75%(Reading database ... 80%(Reading database ... 85%(Reading database ... 90%(Reading database ... 95%(Reading database ... 100%(Reading database ... 43752 files and directories currently installed.)
Preparing to unpack .../libpkcs11-helper1_1.11-2_armhf.deb ...
Unpacking libpkcs11-helper1:armhf (1.11-2) ...
Selecting previously unselected package jq.
Preparing to unpack .../jq_1.4-2.1+deb8u1_armhf.deb ...
Unpacking jq (1.4-2.1+deb8u1) ...
Preparing to unpack .../openmediavault_3.0.69_all.deb ...
Unpacking openmediavault (3.0.69) over (3.0.63) ...
Selecting previously unselected package easy-rsa.
Preparing to unpack .../easy-rsa_2.2.2-1_all.deb ...
Unpacking easy-rsa (2.2.2-1) ...
Selecting previously unselected package openvpn.
Preparing to unpack .../openvpn_2.3.4-5+deb8u1_armhf.deb ...
Unpacking openvpn (2.3.4-5+deb8u1) ...
Selecting previously unselected package openmediavault-openvpn.
Preparing to unpack .../openmediavault-openvpn_3.0.6_all.deb ...
Unpacking openmediavault-openvpn (3.0.6) ...
Processing triggers for man-db (2.7.0.2-5) ...
Processing triggers for systemd (215-17+deb8u6) ...
Setting up libpkcs11-helper1:armhf (1.11-2) ...
Setting up jq (1.4-2.1+deb8u1) ...
Setting up openmediavault (3.0.69) ...
Configuration file '/etc/default/openmediavault'
==> Modified (by you or by a script) since installation.
==> Package distributor has shipped an updated version.
What would you like to do about it ? Your options are:
Y or I : install the package maintainer's version
N or O : keep your currently-installed version
D : show the differences between the versions
Z : start a shell to examine the situation
The default action is to keep your current version.
*** openmediavault (Y/I/N/O/D/Z) [default=N] ? dpkg: error processing package openmediavault (--configure):
EOF on stdin at conffile prompt
Setting up easy-rsa (2.2.2-1) ...
Setting up openvpn (2.3.4-5+deb8u1) ...
Restarting virtual private network daemon.:.
dpkg: dependency problems prevent configuration of openmediavault-openvpn:
openmediavault-openvpn depends on openmediavault (>= 3.0.67); however:
Package openmediavault is not configured yet.
dpkg: error processing package openmediavault-openvpn (--configure):
dependency problems - leaving unconfigured
Processing triggers for libc-bin (2.19-18+deb8u7) ...
Processing triggers for systemd (215-17+deb8u6) ...
Errors were encountered while processing:
openmediavault
openmediavault-openvpn
>>> *************** Error ***************
<<< *************************************
>>> *************** Error ***************
<<< *************************************
>>> *************** Error ***************
<<< *************************************
>>> *************** Error ***************
<<< *************************************
>>> *************** Error ***************
<<< *************************************
>>> *************** Error ***************
<<< *************************************
When I close the log window and when I refresh the web page configuration of OMV, I cannot find the OpenVpn configuration on any section...
Someone can help me ?
What should I do to
Many thanks for the answers....
Hi everybody !
I've got a RPI3 with Openmediavault 3.0.59 (Erasmus).
I've connected on it two external disks : a Western Digital (1 TB) and a Seagate (2 TB).
On the http page of Openmediavault, I can see these two disks on Storage/System files but when the page is refreshed, one of the two disks dissapear... In another refresh, I can see it again and in the next refresh it dissapear again.
I don't understand why ??????
Please note that these two disks are directly connected to the RPI3 without external power supplier.
Can you help me please ?
Many thanks in advance.
Patrick.
*** UPDATE ***
May be I have a clue :
When I mount the two disks and share their folders, it's ok. I can see them on any Laptop...
As soon as I map the folders on my others RPI3 (I've got two other RPI3) through Kodi, the disks are unmounted and cannot be mounted again. I don't know if there is a relation between these events...
I really don't understand...
Hi everybody !
I've got a small problem...
I've installed Openmediavault on my RPI. It works perfectly.
I wanted to make a backup copy of the SD-card just in case it crashes...
The SD-card is a Samsung 16GB.
I followed the following procedure :
- take out the sd-card from my RPI3
- put it on my sd-card reader from my laptop
- open Win32DiskImager
- make a read in order to create an image file on my laptop
- remove the sd-card from my sd-card reader
- put an empty one (also Samsung 16 GB)
- open Win32DiskImager
- make a write on my sd-card
I had the message :
Not enough space on disk : Size 31257600 sectors Available:31256576 sectors
Sector size: 512
I also tried SDFormatter and it doesn't work (Disk unknown)
Any idea ?
Thanks in advance for the answers...
Thanks for the info...
Ok I understand....
Do you think that PlexMediaServer will be ready for the next release ?
Because in OMV 3.0.13, it does not work with a RPi3... (answer from tekkb in a thread opened few weeks ago).
Thank a lot for your assistance !
Great !
Openvpn is installed...
Can you explain why it was so hard to install it ?
Is something missing in the image omv_3.0.13_rpi2_rpi3.img ?
I ask these questions for people who want to do the same as I did...
I've got an error message at the secondstep...
root@openmediavault:~# rm /etc/apt/sources.list.d/openvpn-install.sh
root@openmediavault:~# apt-get purge openmediavault-openvpn
Reading package lists... Done
Building dependency tree
Reading state information... Done
The following package was automatically installed and is no longer required:
php-json-schema
Use 'apt-get autoremove' to remove it.
The following packages will be REMOVED:
openmediavault-openvpn*
0 upgraded, 0 newly installed, 1 to remove and 92 not upgraded.
After this operation, 171 kB disk space will be freed.
Do you want to continue? [Y/n] Y
(Reading database ... 43008 files and directories currently installed.)
Removing openmediavault-openvpn (3.0.2) ...
Purging configuration files for openmediavault-openvpn (3.0.2) ...
Processing triggers for openmediavault (3.0.24) ...
Restarting engine daemon ...
Socket error -- Connection refused
Cannot connect to the monit daemon. Did you start it with http support?
All the commands have been processed...
I can access to the web interface...
OpenVpn seems to be installed...
I'll check later and let you know...
Still can't connect to web interface...
Result for apt-get update (error at the end) :
Ign file: InRelease
Ign file: Release.gpg
Ign file: Release
Ign file: Translation-en_GB
Ign file: Translation-en
Hit http://packages.openmediavault.org erasmus InRelease
Hit http://packages.openmediavault.org erasmus/main armhf Packages
Get:1 https://dl.bintray.com jessie InRelease
Ign https://dl.bintray.com jessie InRelease
Get:2 https://dl.bintray.com jessie InRelease
Ign https://dl.bintray.com jessie InRelease
Hit https://dl.bintray.com jessie Release.gpg
Hit https://dl.bintray.com jessie Release.gpg
Hit https://dl.bintray.com jessie Release
Ign http://packages.openmediavault.org erasmus/main Translation-en_GB
Hit https://dl.bintray.com jessie Release
Ign http://packages.openmediavault.org erasmus/main Translation-en
Hit https://dl.bintray.com jessie/main armhf Packages
Hit http://archive.raspberrypi.org jessie InRelease
Hit http://archive.raspberrypi.org jessie/main armhf Packages
Get:3 https://dl.bintray.com jessie/main Translation-en_GB
Get:4 https://dl.bintray.com jessie/main Translation-en
Hit https://dl.bintray.com jessie/main armhf Packages
Get:5 https://dl.bintray.com jessie/main Translation-en_GB
Hit http://mirrordirector.raspbian.org jessie InRelease
Get:6 https://dl.bintray.com jessie/main Translation-en
Get:7 https://dl.bintray.com jessie/main Translation-en_GB
Get:8 https://dl.bintray.com jessie/main Translation-en
Ign http://archive.raspberrypi.org jessie/main Translation-en_GB
Get:9 https://dl.bintray.com jessie/main Translation-en_GB
Hit http://mirrordirector.raspbian.org jessie/main armhf Packages
Get:10 https://dl.bintray.com jessie/main Translation-en
Ign http://archive.raspberrypi.org jessie/main Translation-en
Hit http://mirrordirector.raspbian.org jessie/contrib armhf Packages
Get:11 https://dl.bintray.com jessie/main Translation-en_GB
Hit http://mirrordirector.raspbian.org jessie/non-free armhf Packages
Get:12 https://dl.bintray.com jessie/main Translation-en
Hit http://mirrordirector.raspbian.org jessie/rpi armhf Packages
Get:13 https://dl.bintray.com jessie/main Translation-en_GB
Get:14 https://dl.bintray.com jessie/main Translation-en
Get:15 https://dl.bintray.com jessie/main Translation-en_GB
Get:16 https://dl.bintray.com jessie/main Translation-en
Get:17 https://dl.bintray.com jessie/main Translation-en_GB
Get:18 https://dl.bintray.com jessie/main Translation-en
Get:19 https://dl.bintray.com jessie/main Translation-en_GB
Ign https://dl.bintray.com jessie/main Translation-en_GB
Get:20 https://dl.bintray.com jessie/main Translation-en
Ign https://dl.bintray.com jessie/main Translation-en
Get:21 https://dl.bintray.com jessie/main Translation-en_GB
Ign https://dl.bintray.com jessie/main Translation-en_GB
Get:22 https://dl.bintray.com jessie/main Translation-en
Ign https://dl.bintray.com jessie/main Translation-en
Ign http://mirrordirector.raspbian.org jessie/contrib Translation-en_GB
Ign http://mirrordirector.raspbian.org jessie/contrib Translation-en
Ign http://mirrordirector.raspbian.org jessie/main Translation-en_GB
Ign http://mirrordirector.raspbian.org jessie/main Translation-en
Ign http://mirrordirector.raspbian.org jessie/non-free Translation-en_GB
Ign http://mirrordirector.raspbian.org jessie/non-free Translation-en
Ign http://mirrordirector.raspbian.org jessie/rpi Translation-en_GB
Ign http://mirrordirector.raspbian.org jessie/rpi Translation-en
Creating index of upgradeable packages ...
Creating index of openmediavault plugins ...
Reading package lists... Done
N: Ignoring file 'openvpn-install.sh' in directory '/etc/apt/sources.list.d/' as it has an invalid filename extension
Result for root@openmediavault:~# apt-get install openmediavault-flashmemory (error at the end) :
Reading package lists... Done
Building dependency tree
Reading state information... Done
The following package was automatically installed and is no longer required:
php-json-schema
Use 'apt-get autoremove' to remove it.
The following extra packages will be installed:
folder2ram
The following packages will be upgraded:
folder2ram openmediavault-flashmemory
2 upgraded, 0 newly installed, 0 to remove and 92 not upgraded.
Need to get 26.8 kB of archives.
After this operation, 5,120 B disk space will be freed.
Do you want to continue? [Y/n] Y
Get:1 https://dl.bintray.com/openmed…lugin-developers/erasmus/ jessie/main folder2ram all 0.2.4 [11.6 kB]
Get:2 https://dl.bintray.com/openmed…lugin-developers/erasmus/ jessie/main openmediavault-flashmemory all 3.4.1 [15.2 kB]
Fetched 26.8 kB in 2s (12.3 kB/s)
(Reading database ... 43006 files and directories currently installed.)
Preparing to unpack .../folder2ram_0.2.4_all.deb ...
Unpacking folder2ram (0.2.4) over (0.2.3) ...
Preparing to unpack .../openmediavault-flashmemory_3.4.1_all.deb ...
Unpacking openmediavault-flashmemory (3.4.1) over (3.1) ...
Processing triggers for man-db (2.7.0.2-5) ...
Processing triggers for openmediavault (3.0.24) ...
Restarting engine daemon ...
Socket error -- Connection refused
Cannot connect to the monit daemon. Did you start it with http support?
Setting up folder2ram (0.2.4) ...
Setting up openmediavault-flashmemory (3.4.1) ...
Welcome to folder2ram version 0.2.4 !
folder2ram is a script-based utility that relocates the contents of a folder to RAM
and on shutdown unmounts it safely synching the data back to the permanent storage.
There are four main components of folder2ram system:
--the init script in /etc/init.d or the systemd service in /etc/folder2ram that calls this main script on boot and shutdown
--the main script in /etc/sbin/folder2ram
--the configuration file in /etc/folder2ram/folder2ram.conf
--the folders in /var/folder2ram, the bind-mounted folders
they allow easy access to the original folder in permanent storage
since if you mount folder A on folder B you lose access to folder B
this trick allows access to B, allowing synching with the tmpfs at will
for first startup use -configure action, edit the mount points as you wish, then -mountall
list of actions (only one at a time):
-enableinit
::::::::::sets up an appropriate autostart/stop init script, does not start it
-enablesystemd
::::::::::sets up an appropriate autostart/stop systemd service, does not start it
-disableinit
::::::::::removes the autostart/stop init script and unmounts all mount points
-disablesystemd
::::::::::removes the autostart/stop systemd service and unmounts all mount points
-safe-disableinit
::::::::::removes the autostart/stop init script but unmounts only at shutdown (hence safely)
::::::::::it also works if folder2ram is unistalled shortly afterwards
-safe-disablesystemd
::::::::::removes the autostart/stop systemd service but unmounts only at shutdown (hence safely)
::::::::::it also works if folder2ram is unistalled shortly afterwards
-status
::::::::::print all mountpoints and their status (mounted or unmounted)
-syncall
::::::::::sync to disk the content of folder2ram's tmpfs folders
-mountall
::::::::::folder2ram will mount all folders in the config file
-umountall
::::::::::folder2ram will unmount all folders in the config file
-configure
::::::::::folder2ram will open the configuration file in a text editor
-reset
::::::::::restore default config file
-clean
::::::::::unmounts all folders then removes any autostart
Processing triggers for openmediavault (3.0.24) ...
Updating locale files ...
Updating file permissions ...
Purging internal cache ...
Restarting engine daemon ...
Socket error -- Connection refused
Cannot connect to the monit daemon. Did you start it with http support?
Creating index of upgradeable packages ...
Creating index of openmediavault plugins ...
N: Ignoring file 'openvpn-install.sh' in directory '/etc/apt/sources.list.d/' as it has an invalid filename extension
N: Ignoring file 'openvpn-install.sh' in directory '/etc/apt/sources.list.d/' as it has an invalid filename extension
N: Ignoring file 'openvpn-install.sh' in directory '/etc/apt/sources.list.d/' as it has an invalid filename extension
The result are :
root@openmediavault:~# dpkg -l | grep openm
ii openmediavault 3.0.24 all Open network attached storage solution
ii openmediavault-flashmemory 3.1 all folder2ram plugin for OpenMediaVault
ii openmediavault-keyring 0.4 all GnuPG archive keys of the OpenMediaVault archive
ii openmediavault-omvextrasorg 3.0.10 all OMV-Extras.org Package Repositories for OpenMediaVault
ii openmediavault-openvpn 3.0.2 all OpenVPN plugin for OpenMediaVault.
root@openmediavault:~# dpkg -l | grep openvpn
ii openmediavault-openvpn 3.0.2 all OpenVPN plugin for OpenMediaVault.
ii openvpn 2.3.4-5+deb8u1 armhf virtual private network daemon
This is the result (connection with Putty) :
root@openmediavault:~# omv-engined -df
omv-engined[1585]: Daemon process started (pid=1586)
root@openmediavault:~# Registered data models:
conf.service.ftp
conf.service.ftp.modban.rule
.......... <-- outputs --> .........
Registered filesystem backends:
.......... <-- outputs --> .........
PHP Fatal error: require_once(): Failed opening required 'openmediavault/config .inc' (include_path='.:/usr/share/php:/usr/share/pear') in /usr/share/openmediav ault/engined/rpc/flashmemory.inc on line 19
root@openmediavault:~#
ok, my fault.
I changed my DNS server to 192.168.1.1
I update the plugins list.
At the end, I've got the following error :
Reading package lists...
Building dependency tree...
Reading state information...
The following package was automatically installed and is no longer required:
php-json-schema
Use 'apt-get autoremove' to remove it.
The following extra packages will be installed:
easy-rsa libpkcs11-helper1 openmediavault openvpn pciutils
Recommended packages:
opensc
The following NEW packages will be installed:
easy-rsa libpkcs11-helper1 openmediavault-openvpn openvpn pciutils
The following packages will be upgraded:
openmediavault
1 upgraded, 5 newly installed, 0 to remove and 94 not upgraded.
Need to get 1614 kB of archives.
After this operation, 2636 kB of additional disk space will be used.
Get:1 http://mirrordirector.raspbian.org/raspbian/ jessie/main libpkcs11-helper1 armhf 1.11-2 [39.4 kB]
Get:2 http://mirrordirector.raspbian.org/raspbian/ jessie/main pciutils armhf 1:3.2.1-3 [251 kB]
Get:3 http://mirrordirector.raspbian.org/raspbian/ jessie/main easy-rsa all 2.2.2-1 [17.1 kB]
Get:4 http://mirrordirector.raspbian.org/raspbian/ jessie/main openvpn armhf 2.3.4-5+deb8u1 [435 kB]
Get:5 http://packages.openmediavault.org/public/ erasmus/main openmediavault all 3.0.24 [845 kB]
Get:6 https://dl.bintray.com/openmed…lugin-developers/erasmus/ jessie/main openmediavault-openvpn all 3.0.2 [27.3 kB]
Preconfiguring packages ...
Fetched 1614 kB in 7s (226 kB/s)
Selecting previously unselected package libpkcs11-helper1:armhf.
(Reading database ... (Reading database ... 5%(Reading database ... 10%(Reading database ... 15%(Reading database ... 20%(Reading database ... 25%(Reading database ... 30%(Reading database ... 35%(Reading database ... 40%(Reading database ... 45%(Reading database ... 50%(Reading database ... 55%(Reading database ... 60%(Reading database ... 65%(Reading database ... 70%(Reading database ... 75%(Reading database ... 80%(Reading database ... 85%(Reading database ... 90%(Reading database ... 95%(Reading database ... 100%(Reading database ... 42586 files and directories currently installed.)
Preparing to unpack .../libpkcs11-helper1_1.11-2_armhf.deb ...
Unpacking libpkcs11-helper1:armhf (1.11-2) ...
Selecting previously unselected package pciutils.
Preparing to unpack .../pciutils_1%3a3.2.1-3_armhf.deb ...
Unpacking pciutils (1:3.2.1-3) ...
Preparing to unpack .../openmediavault_3.0.24_all.deb ...
Unpacking openmediavault (3.0.24) over (3.0.13) ...
>>> *************** Error ***************
Gateway Time-out
<<< *************************************
>>> *************** Error ***************
Failed to connect to socket: No such file or directory
<<< *************************************
An now, when I try to access to Openmediavault web interface, I can not see any information and I've got the following error :
Failed to connect to socket: No such file or directory
Erreur #0:
exception 'OMV\Rpc\Exception' with message 'Failed to connect to socket: No such file or directory' in /usr/share/php/openmediavault/rpc/rpc.inc:135
Stack trace:
#0 /usr/share/php/openmediavault/rpc/proxy/json.inc(95): OMV\Rpc\Rpc::call('Services', 'getStatus', Array, Array, 3)
#1 /var/www/openmediavault/rpc.php(45): OMV\Rpc\Proxy\Json->handle()
#2 {main}
What do you mean by
QuoteYour current problem is you need to set your dns server in network settings.
?
My current dns configuration is :
IPv4
Method : Static
Address : 192.168.1.108 <-- local network address of my RPi3
Mask : 255.255.255.0
192.168.1.1
IPv6
Not active
Advance parameters:
DNS server : 192.168.1.108 <-- local network address of my RPi3
Domain : ....ddns.net <-- set by noip.com
MTU : 1500
Ok for OpenVPN Access Server.
What about OpenVPN ?
When I try to update the plugins, I've got the following error message :
Failed to execute command 'export LANG=C; apt-get update 2>&1': Ign file: InRelease Ign http://mirrordirector.raspbian.org jessie InRelease Err http://mirrordirector.raspbian.org jessie Release.gpg Something wicked happened resolving 'mirrordirector.raspbian.org:http' (-5 - No address associated with hostname) Ign file: Release.gpg Ign file: Release Ign http://mirrordirector.raspbian.org jessie Release Ign https://dl.bintray.com jessie InRelease Ign http://archive.raspberrypi.org jessie InRelease Ign http://packages.openmediavault.org erasmus InRelease Err http://archive.raspberrypi.org jessie Release.gpg Something wicked happened resolving 'archive.raspberrypi.org:http' (-5 - No address associated with hostname) Err http://packages.openmediavault.org erasmus Release.gpg Something wicked happened resolving ........
Hello !
Here it is my configuration : Raspberry PI3 , OMV 3.0.13
My goal is to access to my external HD (connected on my RPi3) from outside through a VPN access.
I can't install openVPN on my RP3i. I can't even see it on the repo.
When I try to install the plugins openmediavault-openvpn 3.0.1, I've got the following error message :
Reading package lists...
>>> *************** Error ***************
Failed to execute command 'export LANG=C; export DEBIAN_FRONTEND=noninteractive; apt-get --yes --force-yes --fix-missing --allow-unauthenticated --reinstall install openmediavault-openvpn 2>&1': Reading package lists...
Building dependency tree...
Reading state information...
E: Unable to locate package openmediavault-openvpn
<<< *************************************
It seems that it can't find the package.
What is the solution for my configuration ?
What I saw in the forums doesn't work...
Thanks in advance for the answers.
ok thanks.
Let's go for OpenVPN AS !
