Posts by Chris71

  • usbbackup broken

    Still no progress here - usbbackup does not run, when the USB harddisk is plugged in. Have to trigger all backups manually in the GUI.


    Any idea, what's the problem here?

  • usbbackup broken

    I've even re-installed the usbbackup-package (before, it was already in the latest version), but it still doesn't autodetect the plugged-in backup disc.


    However, when I manually trigger the backup job in the GUI, it works (though it blocks the GUI for a very long time, until the backup is finished)

  • usbbackup broken

    The backup drive is in good health, I had no problems in mounting it manually (I used /mnt/cdrom as mountpoint).


    The last time, I successfully ran usbbackup was in mid january according to my notes. After that I didn't try it any more, so now it's time :)

  • usbbackup broken

    Unplugging and plugging again does not help. Manual mounting, e.g. to /mnt/cdrom does not help, too.


    I doubt, re-installing the plugin will help, to me it seems, that the plugin itself or the part in OMV, which it uses, is broken :(

  • usbbackup broken

    Hi,


    I just wanted to make my usual backup by just plugging in my USB3-hard drive, but this time, it failed.


    I plugged in the disc, and in /var/log/daemon.log, you can read, what happened:


    May 14 17:18:05 nas systemd[1]: Found device External_USB_3.0 TOSHIBA_EXT.
    May 14 17:18:05 nas systemd[1]: Found device External_USB_3.0 TOSHIBA_EXT.
    May 14 17:18:05 nas systemd[1]: Starting Execute the rsync backup jobs when /dev/disk/by-id/usb-TOSHIBA_External_USB_3.0_20160908007094F-0:0-part2 is plugged in...
    May 14 17:18:06 nas ntfs-3g[3900]: Version 2014.2.15AR.2 integrated FUSE 28
    May 14 17:18:06 nas ntfs-3g[3900]: Mounted /dev/sde2 (Read-Write, label "TOSHIBA EXT", NTFS 3.1)
    May 14 17:18:06 nas ntfs-3g[3900]: Cmdline options: rw
    May 14 17:18:06 nas ntfs-3g[3900]: Mount options: rw,allow_other,nonempty,relatime,fsname=/dev/sde2,blkdev,blksize=4096
    May 14 17:18:06 nas ntfs-3g[3900]: Ownership and permissions disabled, configuration type 7
    May 14 17:18:07 nas openmediavault-usbbackup-fefe811c9a7804e3c6137d70193f91ea[3896]: ERROR: External storage device </dev/disk/by-id/usb-TOSHIBA_External_USB_3.0_20160908007094F-0:0-part2> not mounted!
    May 14 17:18:07 nas openmediavault-usbbackup-fefe811c9a7804e3c6137d70193f91ea[3896]: ERROR: External storage device </dev/disk/by-id/usb-TOSHIBA_External_USB_3.0_20160908007094F-0:0-part2> not mounted!
    May 14 17:18:07 nas openmediavault-usbbackup-fefe811c9a7804e3c6137d70193f91ea[3896]: ERROR: External storage device </dev/disk/by-id/usb-TOSHIBA_External_USB_3.0_20160908007094F-0:0-part2> not mounted!
    May 14 17:18:07 nas openmediavault-usbbackup-fefe811c9a7804e3c6137d70193f91ea[3896]: ERROR: External storage device </dev/disk/by-id/usb-TOSHIBA_External_USB_3.0_20160908007094F-0:0-part2> not mounted!
    May 14 17:18:07 nas openmediavault-usbbackup-fefe811c9a7804e3c6137d70193f91ea[3896]: ERROR: External storage device </dev/disk/by-id/usb-TOSHIBA_External_USB_3.0_20160908007094F-0:0-part2> not mounted!
    May 14 17:18:07 nas openmediavault-usbbackup-fefe811c9a7804e3c6137d70193f91ea[3896]: ERROR: External storage device </dev/disk/by-id/usb-TOSHIBA_External_USB_3.0_20160908007094F-0:0-part2> not mounted!
    May 14 17:18:07 nas openmediavault-usbbackup-fefe811c9a7804e3c6137d70193f91ea[3896]: ERROR: External storage device </dev/disk/by-id/usb-TOSHIBA_External_USB_3.0_20160908007094F-0:0-part2> not mounted!
    May 14 17:18:07 nas openmediavault-usbbackup-fefe811c9a7804e3c6137d70193f91ea[3896]: ERROR: External storage device </dev/disk/by-id/usb-TOSHIBA_External_USB_3.0_20160908007094F-0:0-part2> not mounted!
    May 14 17:18:07 nas openmediavault-usbbackup-fefe811c9a7804e3c6137d70193f91ea[3896]: ERROR: External storage device </dev/disk/by-id/usb-TOSHIBA_External_USB_3.0_20160908007094F-0:0-part2> not mounted!
    May 14 17:18:07 nas openmediavault-usbbackup-fefe811c9a7804e3c6137d70193f91ea[3896]: ERROR: External storage device </dev/disk/by-id/usb-TOSHIBA_External_USB_3.0_20160908007094F-0:0-part2> not mounted!
    May 14 17:18:07 nas openmediavault-usbbackup-fefe811c9a7804e3c6137d70193f91ea[3896]: ERROR: External storage device </dev/disk/by-id/usb-TOSHIBA_External_USB_3.0_20160908007094F-0:0-part2> not mounted!
    May 14 17:18:08 nas ntfs-3g[3900]: Unmounting /dev/sde2 (TOSHIBA EXT)
    May 14 17:18:08 nas systemd[1]: Started Execute the rsync backup jobs when /dev/disk/by-id/usb-TOSHIBA_External_USB_3.0_20160908007094F-0:0-part2 is plugged in.



    Any idea, what changed with that plugin (I use the most recent version 3.2.18 on openmediavault 3.0.75.1), so that it doesn't automount the backup USB disk anymore, and so cannot start the rsync backup process?


    Thank you very much
    Christoph

  • mails from Anacron

    And an additional question: What's the purpose of the following mail, I get daily on my OMV 3 installation:


    Code
    Cron <root@nas> test -x /etc/init.d/anacron && /usr/sbin/invoke-rc.d anacron start >/dev/null [nas.*************]


invoke-rc.d: policy-rc.d denied execution of start.


    Of course, I could modify policy-rc.d, and from what I've seen, it seems to be related to sysvinit (which is a bit odd, since Debian 8 uses systemd instead), but without knowing the reason for it, I don't want to :)


    Thanks
    Christoph

  • smbd startet nicht

    Als MB verwende ich ein AsRock J3710, 4GB RAM, SSD als OS-Harddisk, dazu ein RAID5 mit 3 3TB-Platten.


    Die Installation erfolgte über einen USB-Stick, das Image war das 3.0.42 aus dem offiziellen Download, nach der Installation habe ich noch das Repo für die omv-extras installiert und über die Update-Funktion auf die 3.0.43 aktualisiert.


    Was auffällig ist, ist, daß in /sbin sowohl der "fake" start-stop-daemon (der ja nichts tut und wohl für die Probleme verantwortlich ist) liegt, als auch der "richtige":


    root@nas:~# ls -l /sbin/start*
    -rwxr-xr-x 1 root root 94 Okt 7 21:34 /sbin/start-stop-daemon
    -rwxr-xr-x 1 root root 32392 Mai 3 00:41 /sbin/start-stop-daemon.REAL
    root@nas:~#


    Und wenn ich jetzt den "fake" daemon beiseite schiebe und stattdessen einen Symlink auf den /sbin/start-stop-daemon.REAL setze, läuft auf einmal alles!

  • smbd startet nicht

    Hallo,


    ich setze gerade ein OMV-System mit der aktuellen Beta 3.0.43 auf, und habe das Problem, daß fast kein Dienst regulär startet, weder nfs noch minidlna, noch smb.


    Das Problem scheint daran zu liegen, daß der start-stop-daemon verwendet werden soll, der aber nur ein Dummy ist:


    root@nas:/var/log# systemctl status smbd
    * smbd.service - LSB: start Samba SMB/CIFS daemon (smbd)
    Loaded: loaded (/etc/init.d/smbd)
    Active: active (exited) since Sat 2016-10-08 22:18:02 CEST; 39min ago
    Process: 1252 ExecStart=/etc/init.d/smbd start (code=exited, status=0/SUCCESS)



    Oct 08 22:18:02 nas smbd[1252]: Starting SMB/CIFS daemon: smbd
    Oct 08 22:18:02 nas smbd[1252]: Warning: Fake start-stop-daemon called, doing nothing.
    Oct 08 22:18:02 nas smbd[1252]: .


    und laut ps läuft auch kein smb.


    Was kann ich tun?


    Vielen Dank
    Christoph