Hard to go wrong with an Intel NIC. Most popular and good quality cards have their drivers already in the kernel. I would seriously avoid any noname cheap cards altogether.
Is this one ok? Intel Gigabit CT Desktop, RJ-45, PCIe 1.1 x1, bulk (EXPI9301CTBLK) - Netzwerkkarten Kabel PCIe (mindfactory.de)
Only install and then activate in OMV Network settings?
Since my Asrock board is equipped with an Atheros network card and does not support WOL, I wanted to ask whether it is possible to install a second network card?
As I am a Linux novice, I would be very happy to receive help. I think that after the installation, drivers still have to be installed.
Is there a guide (step by step is best)?
Which card would you recommend for the current OMV 5?
Thanks in advanced
#macom
Thank you 
Hi,
does it have to change the hard drive designation from UUID to Label for Docker / Portainer?
If so, someone could provide me with a short HowTo with the necessary commands, since I don't have much experience with Linux 
@subzero79
then if I only want to limit the access to 2 clients then the right syntax is 192.168.1.157,162 ?
@ryecoaaron
so if I want to use more clients I can use range? 192.168.1.150/170 ?
Can I edit those entrys direct in OMV or is it necessary to make this direct in a putty session?
I have some problems with the syntax for enabling more than one client to access a folder.
For examaple my Raspberry has the following IP xxx.xxx.xxx.157 everything works fine. But how can I add a second client to have access?
xxx.xxx.xxx.157/162? Is this syntay right to allow access for two clients?
solved
Hi,
I´m using OMV now for 2 month and must say for my needs it is very stable and I like it very much.
Now I want to backup the system drive and I find this tutorial for a headless backup. It is written for OMV 2 can I follow it also for make a backup from my OMV 3 system?
Hi,
when I start up building a new datasystem on a new disc this window opens. Don´t think I´m stupid ;-), but must I Ieave this window open till the end or can I close this window and the process still continue??
Great thanks a lot for your help
we talking about this one
right?
OK I have deleted the values.
But I get no update
Is it possible that it does not work because of this repo:
root@MediaNas:~# cat /etc/apt/preferences.d/99omv-extras-org
Package: *
Pin: release n=erasmus-backports, origin dl.bintray.com
Pin-Priority: 995
Package: virtualbox virtualbox-dkms virtualbox-qt minidlna borgbackup python3-msgpack
certbot python-acme python-certbot python-cffi python-cffi-backend python-chardet
python-configargparse python-configobj python-cryptography python-dialog python-enum34
python-funcsigs python-idna python-ipaddress python-mock python-ndg-httpsclient
python-openssl python-parsedatetime python-pbr python-pkg-resources python-psutil
python-pyasn1 python-requests python-rfc3339 python-setuptools python-six python-tz
python-urllib3 python-zope.component python-zope.event python-zope.interface
Pin: release a=jessie-backports
Pin-Priority: 500
Package: *
Pin: release n=erasmus, origin dl.bintray.com
Pin-Priority: 995
Package: *
Pin: release n=erasmus-testing, origin dl.bintray.com
Pin-Priority: 996
here is the output:
Sorry here is also the output from "apt-get update"
or click Check in the Updates tab.
Ok I´m a newbie, but this I did at first :-))) but under extensions it is still 3.4.3
apt-get update
apt-get upgrade
Also no changings
I see that the omvetraorg is available in version 3.4.4.. My installed version is 3.4.3. How can I update this?
