Posts by pinajj

Thank you for your help.

I will follow your suggestion.

Hi 'WI'.

I have this:

Settings for eth0:

Supported ports: [ TP MII ]

Supported link modes: 10baseT/Half 10baseT/Full

100baseT/Half 100baseT/Full

1000baseT/Half 1000baseT/Full

Supported pause frame use: Symmetric Receive-only

Supports auto-negotiation: Yes

Supported FEC modes: Not reported

Advertised link modes: 10baseT/Half 10baseT/Full

100baseT/Half 100baseT/Full

1000baseT/Half 1000baseT/Full

Advertised pause frame use: Symmetric Receive-only

Advertised auto-negotiation: Yes

Advertised FEC modes: Not reported

Link partner advertised link modes: 10baseT/Half 10baseT/Full

100baseT/Half 100baseT/Full

1000baseT/Full

Link partner advertised pause frame use: Symmetric

Link partner advertised auto-negotiation: Yes

Link partner advertised FEC modes: Not reported

Speed: 1000Mb/s

Duplex: Full

Port: MII

PHYAD: 1

Transceiver: internal

Auto-negotiation: on

Supports Wake-on: gsf

Wake-on: d

SecureOn password: 00:00:00:00:00:00

Current message level: 0x00000007 (7)

drv probe link

Link detected: yes

Thank you for the advice 'macom'.

I have been using OMV for a few years in a basic with no problems, but very useful way for me.

Despite my limitations in linux i am a little curious and i will study the topic.

Thanks a lot.

It seems a little complicated.

I will study the topic calmly and patiently and try to achieve the goal.

Thank you very much for this tip.

It's a RPI, as you can see in my signature.

I don't know what is a real time clock (hardware) and how to achive that.

Maybe not for my level of knowledge but that's okay.

For me, not working.

I have WOL installed.

I use this with 10 Tb and 16TB without problems.

https://www.amazon.es/-/pt/gp/…?smid=A5JH7MGCI556L&psc=1

Done.

I know it's just for notification purposes only.

Now it's correct.

Thank you so much.

A simple question, i think!

I put this line 'OMV_MONIT_SERVICE_FILESYSTEM_SPACEUSAGE=90' on /etc/default/openmediavault without results.

Do i have to write some commands via CLI?

Thanks.

Hello donh.
I did not expect so much complication in this process.
For now I'm going back to the solution I was using (OMV4 standalone).
In a while, I will try again, with a new installation of Debian9.
Anyway.
Many, many thanks for your patience and help.
pinajj

No way! For each install:

:/home/joao# apt-get install libjavascript-minifier-xs-perl
Reading package lists... Done
Building dependency tree
Reading state information... Done
You might want to run 'apt --fix-broken install' to correct these.
The following packages have unmet dependencies:
openmediavault : Depends: libjs-extjs6 but it is not installable
Depends: php-fpm
Depends: php-mbstring
Depends: php-pam but it is not installable
Depends: openssh-server
E: Unmet dependencies. Try 'apt --fix-broken install' with no packages (or specify a solution).

and

:/home/joao# apt --fix-broken install
Reading package lists... Done
Building dependency tree
Reading state information... Done
Correcting dependencies... Done
The following additional packages will be installed:
openssh-server openssh-sftp-server
Suggested packages:
molly-guard monkeysphere rssh ufw
The following packages will be REMOVED:
openmediavault
The following NEW packages will be installed:
openssh-server openssh-sftp-server
0 upgraded, 2 newly installed, 1 to remove and 0 not upgraded.
1 not fully installed or removed.
Need to get 372 kB of archives.
After this operation, 9,189 kB disk space will be freed.
Do you want to continue? [Y/n] y
Get:1 http://ftp.uk.debian.org/debian stretch/main amd64 openssh-sftp-server amd64 1:7.4p1-10+deb9u3 [39.5 kB]
Get:2 http://ftp.uk.debian.org/debian stretch/main amd64 openssh-server amd64 1:7.4p1-10+deb9u3 [332 kB]
Fetched 372 kB in 0s (726 kB/s)
Preconfiguring packages ...
(Reading database ... 255886 files and directories currently installed.)
Removing openmediavault (4.1.6) ...
Selecting previously unselected package openssh-sftp-server.
(Reading database ... 254672 files and directories currently installed.)
Preparing to unpack .../openssh-sftp-server_1%3a7.4p1-10+deb9u3_amd64.deb ...
Unpacking openssh-sftp-server (1:7.4p1-10+deb9u3) ...
Selecting previously unselected package openssh-server.
Preparing to unpack .../openssh-server_1%3a7.4p1-10+deb9u3_amd64.deb ...
Unpacking openssh-server (1:7.4p1-10+deb9u3) ...
Setting up openssh-sftp-server (1:7.4p1-10+deb9u3) ...
Processing triggers for systemd (232-25+deb9u3) ...
Processing triggers for man-db (2.7.6.1-2) ...
Setting up openssh-server (1:7.4p1-10+deb9u3) ...

Creating config file /etc/ssh/sshd_config with new version
Creating SSH2 RSA key; this may take some time ...
2048 SHA256:1fmxSl5bLbeZeOnSWv/fZgvtqEy/z5dNZ1vpvItmx70 root@debian-omv (RSA)
Creating SSH2 ECDSA key; this may take some time ...
256 SHA256:e4IaYOTtEZclKb4Ww4Veobvtr9kw6yblVfdVjSt4bd4 root@debian-omv (ECDSA)
Creating SSH2 ED25519 key; this may take some time ...
256 SHA256:N1I2ZXTSJw4HYtUTOlbvfZSY2fM81Z+g9yjIh4UVLsw root@debian-omv (ED25519)
Created symlink /etc/systemd/system/sshd.service → /lib/systemd/system/ssh.service.
Created symlink /etc/systemd/system/multi-user.target.wants/ssh.service → /lib/systemd/system/ssh.service.
Processing triggers for systemd (232-25+deb9u3) ...

and:

:/home/joao# apt-get install openmediavault_4.1.6_all.deb
Reading package lists... Done
Building dependency tree
Reading state information... Done
E: Unable to locate package openmediavault_4.1.6_all.deb
E: Couldn't find any package by glob 'openmediavault_4.1.6_all.deb'
E: Couldn't find any package by regex 'openmediavault_4.1.6_all.deb'

After run each apt-get, the last, show this:

MB - Asus TUF X299 Mark 1
CPU - Intel Core i7 7740X
RAM - GSkill 32GB DDR4 3200MHz Trident Z Red

....

:/home/joao# apt-get --allow-unauthenticated install openmediavault
Reading package lists... Done
Building dependency tree
Reading state information... Done
E: Unable to locate package openmediavault

If you agree, I'd better leave for tomorrow, I wake up early and I have to sleep.
Thanks.