Beiträge von CaparZo

    It was an update from Debian 11 to 12, I used this guide: Wie funktioniert das Update von Debian 11 auf 12? - LinuxNews.de


    Code
    cat /etc/debian_version
    12.5

    hardware:

    Network Video Recorder - Ubiquiti Store Europe


    I would like to try to use Ubiquiti's UNVR as a NAS

    yes i have, but my root directory is not /dev/root. in the fstab is my root directory /dev/mmcblk0p2, why is this directory not in the webinterface to see?

    Here my fstab

    Code
    cat /etc/fstab 
    proc            /proc           proc    defaults          0       0
    /dev/mmcblk0p1  /boot           vfat    defaults          0       2
    /dev/mmcblk0p2  /               ext4    noatime,nodiratime,errors=remount-ro 0 1
    #/var/swap none swap sw 0 0
    # >>> [openmediavault]
    /dev/disk/by-label/Datenspeicher /srv/dev-disk-by-label-Datenspeicher btrfs defaults,nofail 0 2
    # <<< [openmediavault]
    tmpfs           /tmp            tmpfs   defaults        0       0

    My first problem can I fixed. here my solution way:



    After this last commando you become the statement:


    Reading package lists... Done
    Building dependency tree
    Reading state information... Done
    Calculating upgrade... Done
    0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded.


    You can the complete solution way see in my attachment.


    Best regards

    No, OMV4 is a new install no upgrade from OMV3.x. The line with jessie code:

    Code
    deb http://mirrordirector.raspbian.org/raspbian/ jessie main contrib non-free rpi
    deb-src http://archive.raspbian.org/raspbian/ jessie main contrib non-free rpi

    I have change in:

    Code
    deb http://mirrordirector.raspbian.org/raspbian/ stretch main contrib non-free rpi
    deb-src http://archive.raspbian.org/raspbian/ stretch main contrib non-free rpi

    After this change, i have omv-aptclean and apt-get autoclean execute. The problem is the same.

    crazy i have,


    omv-aptclean omv-engined omv-jsminify omv-mkconf omv-mkraid omv-po2json omv-run omv-sysinfo
    omv-changerepo omv-firstaid omv-jsonprettify omv-mkgraph omv-mkwebjs omv-rmraid omv-sensors-detect omv-update
    omv-confdbadm omv-initsystem omv-mkaptidx omv-mki18ndict omv-pm-standby omv-rpc omv-showkey



    I think the installation is broken by omv, pls install new or testing these commands:


    • echo "deb http://packages.openmediavault.org/public erasmus main" > /etc/apt/sources.list.d/openmediavault.list
    • apt-get update
    • apt-get install openmediavault-keyring postfix
    • apt-get update
    • apt-get install openmediavault
    • omv-initsystem

    Tested @home:


    NAS performance tester 1.7 http://www.808.dk/?nastester
    Input invalid. Check drive letter or network path, file size and loops.
    Running warmup...
    Running a 1000MB file write on \\SERVER\Download 5 times...
    Iteration 1: 116,35 MB/sec
    Iteration 2: 109,02 MB/sec
    Iteration 3: 113,27 MB/sec
    Iteration 4: 113,87 MB/sec
    Iteration 5: 109,96 MB/sec
    -----------------------------
    Average (W): 112,49 MB/sec
    -----------------------------
    Running a 1000MB file read on \\SERVER\Download 5 times...
    Iteration 1: 114,89 MB/sec
    Iteration 2: 114,69 MB/sec
    Iteration 3: 114,69 MB/sec
    Iteration 4: 114,48 MB/sec
    Iteration 5: 114,07 MB/sec
    -----------------------------
    Average (R): 114,56 MB/sec
    -----------------------------


    System see signature, So I do not think of OMV 3.x

    0. nie ein fertiges System kaufen :) nun zu deinen Fragen


    1. du kannst partitionieren aber wenn man ein RAID System fährt sollte man dies nicht machen, deswegen gibt es folgendes Extra LVM (Logical Volume Management), hier mal eine allgemeine Beschreibung was LVM macht: https://www.howtoforge.de/anle…m-anleitung-fur-anfanger/


    2. ja geht nennt sich openvpnas und dafür gibt es bei OMV auch ein Plugin, läuft bei mir selber ;)


    3. auch möglich nennt sich NextCloud.


    4. nicht zwingend notwendig, alles was du machen willst kannst du über das Webinterface machen, aber hin und wieder kann putty auch stark helfen.


    Mit Englisch kommst du in diesem Forum weiter, mit Deutsch kommst du nur bedingt weiter. Geholfen wird dir trotzdem ;)