This amount of images with an installed OMV because I have access to these boards. And the second thing popularize the system OMV;)
Beiträge von cyryllo
-
-
I see the other boards. I was just curious about those two - RPi and Odroid-C1. Makes supporting those two images tougher when there are two versions out there.
Images are rarely updated. Only when major change as an update to OMV 3.0
-
Why the different image for RPi and Odroid-C1? I have been making these images for a long time.
Yet they are the other board.
I used your image OMV , updating and changes few in repo, etc. -
Hello.
Prepared system images with OMV 2.1 for several popular motherboards with an ARM (Raspberry Pi, Odroid C1, Cubieboard2, Banana Pi and PRO)
Theoretically system image for Banana Pi should work with other A20 matherboard supported by BananianWhat I did:
- Installation OMV 2.1 (for Banana Pi/PRO use Bananian, For RPi use Minibian, for Odroid use ARMbian and for Cubieboard2 use image OMV by official forum)
- Install and enable OMV-extras repo
- MemoryFlash install plugin (not configure)
All images can download from http://simplenas.comI plan to add images for other motherboards and update the present.
From site can get printable case for Banana Pi/PRO and Cubieboard2
-
I konow how make this.
I would like to use the plugin. But after the installation and upgrade to 8.1 are problems with the configuration nginx-a. I used even with documentation ownCloud but to no avail. With version 8.04 everything worked.@ryecoaaron thx. I will try to update the plugin in free time to work with the latest version of ownCloud
-
-
-
Well you know that you have no intention to develop ownCloud.
Where can I find the source plug-in ownCloud? because I do not see them on github
-
For some time, the official repositories are available for the server ownCloud:
https://software.opensuse.org/…ommunity&package=owncloudCurrently install version 6, which is not quite that old it is terribly slow.
Can you count on an update to version 8.x? -
I am using it on the RPi 2. The openmediavault-openvpn plugin. It works fine. The OpenVPN AS plugin does not work on armhf.
Did you enable the VPN repo in OMV Extras??? Maybe it just needs to be put in the Stoneburner repo.
Yes I have enable this repo
-
OMV 2.1 still work on Wheezy.
-
I can test of course ; )
-
Banana Pi/PRO support max 2TB HDD.
-
Hello.
Is there a chance that the authors have prepared the OpenVPN client plug it into the ARM architecture?
The server is up and running very well. I miss the only VPN client. -
I try install on cubieboard 2 [ARM]
Code
Alles anzeigenapt-get install openmediavault-minidlna Reading package lists... Done Building dependency tree Reading state information... Done Some packages could not be installed. This may mean that you have requested an impossible situation or if you are using the unstable distribution that some required packages have not yet been created or been moved out of Incoming. The following information may help to resolve the situation: The following packages have unmet dependencies: openmediavault-minidlna : Depends: minidlna (>= 1.0.24) but it is not going to be installed E: Unable to correct problems, you have held broken packages.
my repo:
Code
Alles anzeigendeb http://ftp.pl.debian.org/debian wheezy main contrib non-free deb-src http://ftp.pl.debian.org/debian wheezy main contrib non-free deb http://ftp.pl.debian.org/debian/ wheezy-updates main contrib non-free deb-src http://ftp.pl.debian.org/debian/ wheezy-updates main contrib non-free deb http://security.debian.org/ wheezy/updates main contrib non-free deb-src http://security.debian.org/ wheezy/updates main contrib non-free deb http://ftp.pl.debian.org/debian/ wheezy-backports main contrib non-free
EDIT:
I add deb-multimedia repository and work. -
I have this banana pi. Will be bananas 0,6 for this banana pi? I would like to have upgrade owncloud from 6 to 8. Can I use image bananas 0,6 pro to banana pi? That is almost same devices? Thanks for answer
Yes. Run via ssh bananian-config and change boards on Banana Pi and comment or remove line ap6210 in /etc/modules
-
I just had the same problem. It's the file located in /etc/nginx/fastcgi_params that miss this line :
fastcgi_param SCRIPT_FILENAME $request_filename;Nginx probably updated it and remove this line (don't know why). I though it was my configuration (I use a very modified omv with a passenger nginx and a lot of addition) but it seems it cames from debian.
Anyway it's fixed.Show
-
Ok now work.
I installed version of nginx 1.8.0 and she messed. I reinstalled at 1.2.1 and everything returned to normal.
Thank you for your help
-
That is probably your problem. You must have added the nginx repo. Even jessie is only at 1.6.2.
Yes i have added repo. Now remove and reinstation ngix and omv. But no can login. use omv-firstaid and change pass but not work
edit:
ok i use passwd admin and change pass. -
I have nginx ver 1.8.0 maybe it is a problem.
On another machine i have 1.2.1 version and work