Beiträge von omavoss

lsioarmhf/kodi-headless-aarch64 or lsioarmhf/kodi-headless ? I'am not shure ...

Yeah, I guess I'm a little too impatient.

The problems start with the fact that I don't know what kind of processor it is and what kind of operating system the Armbian is (64- or 32-bit).

login as: root
root@192.168.115.130's password:
____                                  ____  _
| __ )  __ _ _ __   __ _ _ __   __ _  |  _ \(_)
|  _ \ / _` | '_ \ / _` | '_ \ / _` | | |_) | |
| |_) | (_| | | | | (_| | | | | (_| | |  __/| |
|____/ \__,_|_| |_|\__,_|_| |_|\__,_| |_|   |_|




Welcome to ARMBIAN 5.70 stable Debian GNU/Linux 9 (stretch) 4.19.13-sunxi
System load:   4.47 3.44 1.63   Up time:       6 min
Memory usage:  22 % of 998MB    IP:            192.168.115.130
CPU temp:      45°C
Usage of /:    98% of 7.4G      storage/:      63% of 466G


[ General system configuration (beta): armbian-config ]


Last login: Mon Jan 14 20:19:06 2019 from 192.168.115.3


root@bananapi:~# cat /proc/cpuinfo
processor       : 0
model name      : ARMv7 Processor rev 4 (v7l)
BogoMIPS        : 50.52
Features        : half thumb fastmult vfp edsp neon vfpv3 tls vfpv4 idiva idivt                                                                                                                                vfpd32 lpae evtstrm
CPU implementer : 0x41
CPU architecture: 7
CPU variant     : 0x0
CPU part        : 0xc07
CPU revision    : 4


processor       : 1
model name      : ARMv7 Processor rev 4 (v7l)
BogoMIPS        : 50.52
Features        : half thumb fastmult vfp edsp neon vfpv3 tls vfpv4 idiva idivt                                                                                                                                vfpd32 lpae evtstrm
CPU implementer : 0x41
CPU architecture: 7
CPU variant     : 0x0
CPU part        : 0xc07
CPU revision    : 4


Hardware        : Allwinner sun7i (A20) Family
Revision        : 0000
Serial          : 165166ca0802ded3
root@bananapi:~#

Which Kodi Docker image do I need now? 32 bit or 64 bit?

It's all very hard for me, excuse me.

The Name from the Machine is BananaPi-M1 . . . or BananaPi A20 . . . am a beginner.

geaves:
So, now with the armhf image it looks like this:

Now access it from a browser, but how?

Edit:
Configuration not successful, any errors:

THANK YOU, I'am very happy! This hint is great for me!
I must tidy my test docker system and then ... start over!

yes, STATE: running I use BananaPi (please see onest image in #5).

Where I find this image lsioarmhf/kodi-headless for that BananaPi?

Oh, I found it. It's too hard for me.
I just want to learn how to use docker and will choose another image to test.

Thank you very much.

No I see actually:

sorry,
Now I have created a container, the default host path is /var/lib/docker. Now I see:

Start is greying out ...

Hey @geaves,

which is the correct host path for the container?

Thank you.

No, eth0 isn't displayed, I can add the interface eth0 with DHCP successful, not with static IP address.

Thank you so much so far, now I have to see for myself. If I should not be successful, I will contact you here again.

Many friendly greetings.

(translated from german to english with DeepL) -> https://www.deepl.com

omv-firstaid displayed error while I selected option 1:

ERROR: dialog-like terminated due to an error: the dialog-like program exited with status 3 (which was passed to it as the DIALOG_ERROR environment variable). Sometimes, the reason is simply that dialog was given a height or width parameter that is too big for the terminal in use. Its output, with leading and trailing whitespace stripped, was:


Error: Expected at least 5 tokens for --menu, have 4.
Use --help to list options.
root@bananapi:~#

Please see 2019-01-14 11_49_30-Microsoft Edge.png in #5.

No interface is displayed at all.

Edit:

armbian-config displayed

The IP from my OMV is 192.168.115.130, it is a banana pi.

login as: root
root@192.168.115.130's password:
____                                  ____  _
| __ )  __ _ _ __   __ _ _ __   __ _  |  _ \(_)
|  _ \ / _` | '_ \ / _` | '_ \ / _` | | |_) | |
| |_) | (_| | | | | (_| | | | | (_| | |  __/| |
|____/ \__,_|_| |_|\__,_|_| |_|\__,_| |_|   |_|




Welcome to ARMBIAN 5.70 stable Debian GNU/Linux 9 (stretch) 4.19.13-sunxi
System load:   0.25 0.39 0.36   Up time:       41 min
Memory usage:  16 % of 998MB    IP:            192.168.115.130
CPU temp:      40°C
Usage of /:    99% of 7.4G      storage/:      63% of 466G


[ General system configuration (beta): armbian-config ]


Last login: Mon Jan 14 11:07:29 2019 from 192.168.115.3


root@bananapi:~# ifconfig
docker0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500
inet 172.17.0.1  netmask 255.255.0.0  broadcast 172.17.255.255
ether 02:42:04:89:a1:64  txqueuelen 0  (Ethernet)
RX packets 0  bytes 0 (0.0 B)
RX errors 0  dropped 0  overruns 0  frame 0
TX packets 0  bytes 0 (0.0 B)
TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0


eth0: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500
inet 192.168.115.130  netmask 255.255.255.0  broadcast 192.168.115.255
inet6 2003:f8:93d2:2700:8536:5d97:7278:497  prefixlen 64  scopeid 0x0<global>
inet6 2003:f8:93d2:2700:6952:243:479e:6f19  prefixlen 64  scopeid 0x0<global>
inet6 fe80::3a8f:6d60:602e:ae5d  prefixlen 64  scopeid 0x20<link>
ether 02:ca:08:02:de:d3  txqueuelen 1000  (Ethernet)
RX packets 9788  bytes 2161128 (2.0 MiB)
RX errors 0  dropped 4  overruns 0  frame 0
TX packets 2160  bytes 645893 (630.7 KiB)
TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0
device interrupt 60


lo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536
inet 127.0.0.1  netmask 255.0.0.0
inet6 ::1  prefixlen 128  scopeid 0x10<host>
loop  txqueuelen 1000  (Lokale Schleife)
RX packets 814  bytes 92382 (90.2 KiB)
RX errors 0  dropped 0  overruns 0  frame 0
TX packets 814  bytes 92382 (90.2 KiB)
TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0


root@bananapi:~#

Wenn ich eine neue Netzwerkschnittstelle hinzufügen will (eth0) kommen neue Fehler hoch.
Gibt es bitte weitere Hinweise?

When I want to add a new network interface (eth0), new errors come up.
Any other leads, please?

Soweit gut, aber es kommt der nächste Fehler:

So far, good, but there's another mistake:

Was kann man tun?

What can you do?

Hallo alle,
bitte gebt mir einige Hinweise, wie das Netzwerk richtig zu konfigurieren ist, damit ich auf den Kodi-Container zugreifen kann, denn hier kommen immer Fehler hoch:

Hello, everybody,

please give me some hints on how to configure the network correctly, so that I can access the Kodi container, because there are always errors:

Vielen Dank schon jetzt und freundliche Grüße.

Thank you very much and kind regards.

Hallo alle,
bitte auf deutsch:
ich suche analog zu einem Synology-NAS eine Möglichkeit, wie bei Synology-Photo-Station einen Ordner mit einem Link zu versehen, damit der Inhalt dieses Ordners vom Empfänger des Links heruntergeladen werden kann (zeitlich begrenzt und mit einem Passwort versehen).
Ich möchte einem meiner Familienangehörigen einen Link schicken, womit er oder sie sich den Inhalt eines explizit für sie freigegebenen Ordners herunterladen können.
Gibt es da etwas für OMV?

Danke und viele Grüße.

Update from 4.1.16-2 to 4.1.17-1 successful, thanks to the developers of the image for bananapi and omv at all.

Sorry, the system requested the selection of the upgrade icon.

Yes, that was the problem, thank you.

root@TERRA2:~# systemctl start tftp-hpa
Failed to start tftp-hpa.service: Unit tftp-hpa.service not found.
root@TERRA2:~#

root@TERRA2:~# systemctl status tftpd-hpa.service
● tftpd-hpa.service - LSB: HPA's tftp server
Loaded: loaded (/etc/init.d/tftpd-hpa; generated; vendor preset: enabled)
Active: failed (Result: exit-code) since Sun 2018-07-15 16:42:08 CEST; 20min ago
Docs: man:systemd-sysv-generator(8)
Process: 1821 ExecStart=/etc/init.d/tftpd-hpa start (code=exited, status=66)

Jul 15 16:42:07 TERRA2 systemd[1]: Starting LSB: HPA's tftp server...
Jul 15 16:42:08 TERRA2 in.tftpd[1827]: Cannot open map file: /etc/tftp_remap.conf: No such file or directory
Jul 15 16:42:08 TERRA2 tftpd-hpa[1821]: Starting HPA's tftpd: in.tftpd
Jul 15 16:42:08 TERRA2 systemd[1]: tftpd-hpa.service: Control process exited, code=exited status=66
Jul 15 16:42:08 TERRA2 systemd[1]: Failed to start LSB: HPA's tftp server.
Jul 15 16:42:08 TERRA2 systemd[1]: tftpd-hpa.service: Unit entered failed state.
Jul 15 16:42:08 TERRA2 systemd[1]: tftpd-hpa.service: Failed with result 'exit-code'.
root@TERRA2:~#

root@TERRA2:~# journalctl -xe
-- Logs begin at Sun 2018-07-15 16:40:30 CEST, end at Sun 2018-07-15 17:03:42 CEST. --
Jul 15 16:40:30 TERRA2 kernel: Normal zone: 196608 pages, LIFO batch:31
Jul 15 16:40:30 TERRA2 kernel: Reserved but unavailable: 98 pages
Jul 15 16:40:30 TERRA2 kernel: Reserving Intel graphics memory at [mem 0xcf800000-0xcfffffff]
Jul 15 16:40:30 TERRA2 kernel: ACPI: PM-Timer IO Port: 0x408
Jul 15 16:40:30 TERRA2 kernel: ACPI: Local APIC address 0xfee00000
Jul 15 16:40:30 TERRA2 kernel: ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
Jul 15 16:40:30 TERRA2 kernel: ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
Jul 15 16:40:30 TERRA2 kernel: ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
Jul 15 16:40:30 TERRA2 kernel: ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
Jul 15 16:40:30 TERRA2 kernel: IOAPIC[0]: apic_id 4, version 32, address 0xfec00000, GSI 0-23
Jul 15 16:40:30 TERRA2 kernel: ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
Jul 15 16:40:30 TERRA2 kernel: ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
Jul 15 16:40:30 TERRA2 kernel: ACPI: IRQ0 used by override.
Jul 15 16:40:30 TERRA2 kernel: ACPI: IRQ9 used by override.
Jul 15 16:40:30 TERRA2 kernel: Using ACPI (MADT) for SMP configuration information
Jul 15 16:40:30 TERRA2 kernel: ACPI: HPET id: 0x8086a201 base: 0xfed00000
Jul 15 16:40:30 TERRA2 kernel: smpboot: Allowing 4 CPUs, 0 hotplug CPUs
Jul 15 16:40:30 TERRA2 kernel: PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
Jul 15 16:40:30 TERRA2 kernel: PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
Jul 15 16:40:30 TERRA2 kernel: PM: Registered nosave memory: [mem 0x000a0000-0x000effff]
Jul 15 16:40:30 TERRA2 kernel: PM: Registered nosave memory: [mem 0x000f0000-0x000fffff]
Jul 15 16:40:30 TERRA2 kernel: PM: Registered nosave memory: [mem 0xcf590000-0xcf5e2fff]
Jul 15 16:40:30 TERRA2 kernel: PM: Registered nosave memory: [mem 0xcf5e3000-0xcf5effff]
Jul 15 16:40:30 TERRA2 kernel: PM: Registered nosave memory: [mem 0xcf5f0000-0xcf5fffff]
Jul 15 16:40:30 TERRA2 kernel: PM: Registered nosave memory: [mem 0xcf600000-0xcf7fffff]
Jul 15 16:40:30 TERRA2 kernel: PM: Registered nosave memory: [mem 0xcf800000-0xcfffffff]
Jul 15 16:40:30 TERRA2 kernel: PM: Registered nosave memory: [mem 0xd0000000-0xdfffffff]
Jul 15 16:40:30 TERRA2 kernel: PM: Registered nosave memory: [mem 0xe0000000-0xefffffff]
Jul 15 16:40:30 TERRA2 kernel: PM: Registered nosave memory: [mem 0xf0000000-0xfebfffff]
Jul 15 16:40:30 TERRA2 kernel: PM: Registered nosave memory: [mem 0xfec00000-0xffffffff]
Jul 15 16:40:30 TERRA2 kernel: e820: [mem 0xd0000000-0xdfffffff] available for PCI devices
Jul 15 16:40:30 TERRA2 kernel: Booting paravirtualized kernel on bare hardware
Jul 15 16:40:30 TERRA2 kernel: clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
Jul 15 16:40:30 TERRA2 kernel: random: get_random_bytes called from start_kernel+0x94/0x4e5 with crng_init=0
Jul 15 16:40:30 TERRA2 kernel: setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:4 nr_node_ids:1
Jul 15 16:40:30 TERRA2 kernel: percpu: Embedded 44 pages/cpu @ (ptrval) s142296 r8192 d29736 u524288
Jul 15 16:40:30 TERRA2 kernel: pcpu-alloc: s142296 r8192 d29736 u524288 alloc=1*2097152
Jul 15 16:40:30 TERRA2 kernel: pcpu-alloc: [0] 0 1 2 3
Jul 15 16:40:30 TERRA2 kernel: Built 1 zonelists, mobility grouping on. Total pages: 1029442
Jul 15 16:40:30 TERRA2 kernel: Policy zone: Normal
Jul 15 16:40:30 TERRA2 kernel: Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.16.0-0.bpo.2-amd64 root=UUID=08413f62-d10b-4b54-916d-a1c1aa3b5387 ro quiet
Jul 15 16:40:30 TERRA2 kernel: Calgary: detecting Calgary via BIOS EBDA area
Jul 15 16:40:30 TERRA2 kernel: Calgary: Unable to locate Rio Grande table in EBDA - bailing!
Jul 15 16:40:30 TERRA2 kernel: Memory: 3997176K/4183224K available (10252K kernel code, 1182K rwdata, 3132K rodata, 1528K init, 688K bss, 186048K reserved, 0K cma-reserved)
Jul 15 16:40:30 TERRA2 kernel: SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
Jul 15 16:40:30 TERRA2 kernel: Kernel/User page tables isolation: enabled
Jul 15 16:40:30 TERRA2 kernel: ftrace: allocating 29921 entries in 117 pages
Jul 15 16:40:30 TERRA2 kernel: Hierarchical RCU implementation.
Jul 15 16:40:30 TERRA2 kernel: RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=4.
Jul 15 16:40:30 TERRA2 kernel: RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
Jul 15 16:40:30 TERRA2 kernel: NR_IRQS: 33024, nr_irqs: 456, preallocated irqs: 16
Jul 15 16:40:30 TERRA2 kernel: Console: colour VGA+ 80x25
Jul 15 16:40:30 TERRA2 kernel: console [tty0] enabled
Jul 15 16:40:30 TERRA2 kernel: ACPI: Core revision 20180105
Jul 15 16:40:30 TERRA2 kernel: ACPI: 2 ACPI AML tables successfully acquired and loaded
Jul 15 16:40:30 TERRA2 kernel: clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
Jul 15 16:40:30 TERRA2 kernel: hpet clockevent registered
Jul 15 16:40:30 TERRA2 kernel: APIC: Switch to symmetric I/O mode setup
Jul 15 16:40:30 TERRA2 kernel: ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
--More--

and more and more and at the end:

-- Unit tftpd-hpa.service has begun starting up.
Jul 15 17:03:42 TERRA2 in.tftpd[2871]: Cannot open map file: /etc/tftp_remap.conf: No such file or directory
Jul 15 17:03:42 TERRA2 tftpd-hpa[2865]: Starting HPA's tftpd: in.tftpd
Jul 15 17:03:42 TERRA2 systemd[1]: tftpd-hpa.service: Control process exited, code=exited status=66
Jul 15 17:03:42 TERRA2 systemd[1]: Failed to start LSB: HPA's tftp server.
-- Subject: Unit tftpd-hpa.service has failed
-- Defined-By: systemd
-- Support: https://www.debian.org/support
--
-- Unit tftpd-hpa.service has failed.
--
-- The result is failed.
Jul 15 17:03:42 TERRA2 systemd[1]: tftpd-hpa.service: Unit entered failed state.
Jul 15 17:03:42 TERRA2 systemd[1]: tftpd-hpa.service: Failed with result 'exit-code'.
root@TERRA2:~#

Oh, sorry ...

Yes, I have the tftp plugin installed, but I get the following error message:

What should I do?

Oh, sorry ...

Yes, I have the tftp plugin installed, but I get the following error message:

What should I do?