Posts by SVS

Anyone else having issues with the newest kernel (4.9+79~bpo8+1)?
I started to get a lot messages in syslog about my OS drive found device INTEL_SSD.... Like 5 times in one second quite randomly. Thought the OS drive was broken or corrupted so did a fresh install. That worked until apt-get upgrade that installed the newest kernel. I think the the new kernel might actually corrupt the OS drive as it is giving these weird entries in syslog and sometimes booting hanged.
I also had issues with a plugin (VDR) so decided to go back to OMV2. This left me stuck with crappy network speed of ~20MB/s. Ordered a TP-Link TG-3468, should be good price/performance.

In the driver config section try to add

pollinterval = 10

I had some problems with my Eaton 3S 550 because the default pollinterval was too short.

Please tell us the make and model of your UPS. How is it connected to your OMV? USB? Also a screenshot of the settings can help.

A late reply but could you post the contents of the var/lib/vdr/plugins/streamdev-server/streamdevhosts.conf.
Or did you get the problem solved already?

I don't use Plex so I can't answer that question. A quick google on the older J1900 revealed this thread: https://forums.plex.tv/discuss…ce-with-the-celeron-j1900
So it sounds the J3710 should work?

For some kind of comparison you can check CPU Benchmark scores:
http://www.cpubenchmark.net/cp…Pentium+J3710+%40+1.60GHz
http://www.cpubenchmark.net/cp…Celeron+J1900+%40+1.99GHz
https://www.cpubenchmark.net/c…Celeron+N3150+%40+1.60GHz

http://www.asrock.com/mb/Intel/J3710-ITX/index.us.asp

- Intel® Quad-Core Pentium® Processor J3710 (up to 2.64 GHz)
- Dual Channel DDR3/DDR3L Memory Technology (Max 16GB)
- Realtek RTL8111GR
- 2 x SATA3 6.0 Gb/s Connectors, support NCQ, AHCI and Hot Plug
- 2 x SATA3 6.0 Gb/s Connectors by ASMedia ASM1061, support NCQ, AHCI and Hot Plug

Using kernel 4.6.0-0.bpo.1-amd64
- rtcwake works with -m off

The network speed is quite good at around 100MB/s. I used the driver from Realtek although it does not say it is for 4.x kernel. The driver I'm using is:
r8168-8.042.00
http://www.realtek.com/downloa…nTypeID=3&GetDown=false#2
(LINUX driver for kernel 3.x and 2.6.x and 2.4.x)

Only issue is that you cannot use mixed RAM sticks (freq and voltages must match)

Please give results of the following command: smartctl -a /dev/sda
(Assuming that sda is the disk in question)

Good you got it working. If you could post how you fixed this issue it could help other users.

If you google how to fix a bad superblock you might be able to fix the issue.
I suggest to check/replace the sata cable and mayby even the sata power cable. Also check that your powersupply output (Amps/Watts) is large enough.

Did you have the old yaVDR setup connected to the TV or did it stream to the Raspberry Pi?
Did you do the tests above only with the RPi? Please test the streamdev server with another computer.
Do you have the MPEG2 license installed correctly on the RPi?

What kernel are you using? Before you try to use the bakports kernel do a backup. It's very unlikely that it will mess things up but just incase.
Seems that you have built the VNSI server from source? Are you sure that the version is compatible with the version of VDR you are using?
Can you post an example of a working HD channel and a nonworking SD channel from channels.conf?
If you enable the streamdev server can you view all channels from your browser?

The F3 versio of the BIOS works with OMV 1.0.20 (Kernel 3.2.0 and 3.16) and can be run headless.

Really strange that you have problems. You probably have some special software installed?
Other people haven't reported problems like you describe.

Post outputs of (use separate code tags as outputs are large)

cat /etc/default/vdr
cat /etc/default/vdradmin-am
cat /var/lib/vdr/setup.conf
awk '/<vdr>/,/<\/vdr>/' /etc/openmediavault/config.xml

VDR does not start automatically. You have to enable it from the VDR plugin settings page.
Please post a screenshot of the VDR plugin settings you have in OMV web interface.

Disable all the VDR features before removal. Then remove the plugin and reinstall.
If that does not work then remove the plugin and post here the output of

dpkg -l | grep vdr

I suggest that you make a backup of your channel list. The file is

/var/lib/vdr/channels.conf

Then remove the plugin and reinstall it.

I was hoping for better performance on the Cubie with SATA connection.
What is the make/model of the HDD you are using? Could that be a bottleneck?

Very, very nice!
How is the performance on your device? Any benchmarks done? Power consumption?
Thanks for sharing!

Have you set any power management fetures for the storage drives?
Idle means storage drives have stopped spinning?