Had the same issue with proxmox VM, the sollution for me was to tick "disconnected" in network device and run the VM. Once the installation was past "Configuring the network for DHCP6" and got to normal network config, i untickted disconnected fast and pressed ok - and everything went ok after that.
Beiträge von sundberg84
-
-
Another followup.
I tried duplicati, but got an installation error, so i made a network link from my Onedrive folder to one of the network drives to backup somethings from there.
This causes OMV to crash, but stopping Onedrive and removing the link from my computer seems to fix this. I just have to try to get duplicati to work.
Everything else seems to work fine. -
Just wanted to do a followup on this.
Your advice tkaiser seems to be working great (just installed it - will have to come back for long-run feedback later) with Rock64 + JMS561 dual disk SATA bridge and two 1TB HD running a mirror raid. Thanks! -
Im not expecting top performance (that's why I wanted to try the raspberry). I just want to move and steam some files over a home network.
Thanks for your hardware tip. I truly appreciate your effort to help a newbie like myself!! I will look into it asap.
-
I can tell you know what you are talking about... thanks for even more great info. I will look into other hardware.
My chooses now is that I have 2 discs and I could buy a NAS enclosure for around 90€ (Zyxel NAS 326) but I want to use open source. I dislike closed projects. What would you do? I'm not willing to do much more in money .
-
Thanks tkaiser.I Isuspected an answer like this and I have been looking for better hardware. It is very tempting to try to do this on a raspberry but I guess the result is not always satisfying.
Anyways, thanks for the links but I guess another nas-hardware will have tondo but that means no omw which I like very much.
-
Hi!
I have a external 465gb harddrive attached to a sata2usb device. This is formated to a Ext4 format and works great if I attach it to my Linux PC.
I then have installed 3.0.98 omv to both a Raspberry 2 and 3 to exclude Rasp problems.
When i attach the disk to the raspberry everything is fine, I can see the disk in "Physical disc menu".
Wwen i press "File system" the disc disconnects with the message: "reset high-speed USB device number 8 using dwc_otg"I have external power to the disc and have tried several different ways including a powered usb 2.0 splitter.
Dmesg:
Code
Alles anzeigen[ 505.358453] hub 1-1.4:1.0: USB hub found [ 505.358661] hub 1-1.4:1.0: 4 ports detected [ 505.676570] usb 1-1.4.4: new high-speed USB device number 6 using dwc_otg [ 505.820195] usb 1-1.4.4: New USB device found, idVendor=1bcf, idProduct=0c31 [ 505.820211] usb 1-1.4.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 505.820219] usb 1-1.4.4: Product: USB to Serial-ATA bridge [ 505.820226] usb 1-1.4.4: Manufacturer: Sunplus Innovation Technology [ 505.820233] usb 1-1.4.4: SerialNumber: 301123456789 [ 505.822919] usb-storage 1-1.4.4:1.0: USB Mass Storage device detected [ 505.823319] scsi host1: usb-storage 1-1.4.4:1.0 [ 506.887829] scsi 1:0:0:0: Direct-Access SPIF30x USB2SATA Bridge 0132 PQ: 0 ANSI: 2 [ 506.889174] sd 1:0:0:0: Attached scsi generic sg1 type 0 [ 506.892146] sd 1:0:0:0: [sdb] Attached SCSI removable disk [ 567.566469] usb 1-1.4.1: new high-speed USB device number 7 using dwc_otg [ 567.697453] usb 1-1.4.1: New USB device found, idVendor=13fd, idProduct=0840 [ 567.697466] usb 1-1.4.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 567.697473] usb 1-1.4.1: Product: External [ 567.697480] usb 1-1.4.1: Manufacturer: Generic [ 567.697487] usb 1-1.4.1: SerialNumber: 5744453335334D5820202020 [ 567.698450] usb-storage 1-1.4.1:1.0: USB Mass Storage device detected [ 567.700608] scsi host2: usb-storage 1-1.4.1:1.0 [ 568.727903] scsi 2:0:0:0: Direct-Access Generic External 1.14 PQ: 0 ANSI: 4 [ 568.729745] sd 2:0:0:0: Attached scsi generic sg2 type 0 [ 568.729805] sd 2:0:0:0: [sdc] 976773167 512-byte logical blocks: (500 GB/466 GiB) [ 568.730307] sd 2:0:0:0: [sdc] Write Protect is off [ 568.730328] sd 2:0:0:0: [sdc] Mode Sense: 23 00 00 00 [ 568.730882] sd 2:0:0:0: [sdc] No Caching mode page found [ 568.730899] sd 2:0:0:0: [sdc] Assuming drive cache: write through [ 568.833754] sdc: sdc1 [ 568.836837] sd 2:0:0:0: [sdc] Attached SCSI disk
lsusb (before pressing file systems)
Coderoot@sundbergvault:/# lsusb Bus 001 Device 006: ID 1bcf:0c31 Sunplus Innovation Technology Inc. SPIF30x Serial-ATA bridge Bus 001 Device 008: ID 13fd:0840 Initio Corporation INIC-1618L SATA Bus 001 Device 005: ID 1a40:0101 Terminus Technology Inc. 4-Port HUB Bus 001 Device 004: ID 0bc2:3010 Seagate RSS LLC Bus 001 Device 003: ID 0424:ec00 Standard Microsystems Corp. SMSC9512/9514 Fast Ethernet Adapter Bus 001 Device 002: ID 0424:9514 Standard Microsystems Corp. Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
I have tried both dwc_otg.speed=1 and max_usb_current=1
As soon as I press File Systems i get this:
Code
Alles anzeigen[ 659.166552] usb 1-1.4.1: reset high-speed USB device number 7 using dwc_otg [ 690.506484] usb 1-1.4.1: reset high-speed USB device number 7 using dwc_otg [ 700.746486] usb 1-1.4.1: reset high-speed USB device number 7 using dwc_otg [ 717.386510] usb 1-1.4.1: reset high-speed USB device number 7 using dwc_otg [ 717.616495] usb 1-1.4.1: reset high-speed USB device number 7 using dwc_otg [ 728.266506] usb 1-1.4.1: reset high-speed USB device number 7 using dwc_otg [ 728.397041] sd 2:0:0:0: Device offlined - not ready after error recovery [ 728.397082] sd 2:0:0:0: [sdc] tag#0 UNKNOWN(0x2003) Result: hostbyte=0x05 driverbyte=0x00 [ 728.397097] sd 2:0:0:0: [sdc] tag#0 CDB: opcode=0x28 28 00 00 00 0b 30 00 00 08 00 [ 728.397106] blk_update_request: I/O error, dev sdc, sector 2864 [ 728.397294] sd 2:0:0:0: rejecting I/O to offline device [ 728.397429] sd 2:0:0:0: rejecting I/O to offline device [ 728.397516] sd 2:0:0:0: rejecting I/O to offline device [ 728.397619] sd 2:0:0:0: rejecting I/O to offline device [ 728.397681] sd 2:0:0:0: rejecting I/O to offline device [ 728.397769] sd 2:0:0:0: rejecting I/O to offline device [ 728.397843] sd 2:0:0:0: rejecting I/O to offline device [ 728.397944] sd 2:0:0:0: rejecting I/O to offline device [ 728.398952] sd 2:0:0:0: rejecting I/O to offline device [ 728.399108] sd 2:0:0:0: rejecting I/O to offline device [ 728.399217] sd 2:0:0:0: rejecting I/O to offline device [ 728.399311] sd 2:0:0:0: rejecting I/O to offline device [ 728.404432] sd 2:0:0:0: rejecting I/O to offline device
What can I check more?
Is there any other info I can post for you to get more ideas?