Posts by blindguy

    I think I broke things when I set custom values in the etc\default\openmediavault by adding the line OMV_MONIT_SERVICE_FILESYSTEM_SPACEUSAGE="80"


    I was able to restore my /etc/monit/conf.d/openmediavault-filesystem.conf and etc\default\openmediavault from a backup a had and everythgin 'SEEMS' to be running ok. Thanks for that assistance.

    I edited /etc/monit/conf.d/openmediavault-filesystem.conf to look like:


    # Alert if disk space of root filesystem gets low
    check filesystem rootfs with path /
    if space usage > OMV_MONIT_SERVICE_FILESYSTEM_SPACEUSAGE for 5 times within 15 cycles
    then alert else if succeeded for 10 cycles then alert


    check filesystem fs_media_44af1310-9906-4c34-881d-7f08b7ac7c12 with path "/media/44af1310-9906-4c34-881d-7f08b7ac7c12"
    if space usage > OMV_MONIT_SERVICE_FILESYSTEM_SPACEUSAGE for 5 times within 15 cycles
    then alert else if succeeded for 10 cycles then alert
    #check program mp_media_44af1310-9906-4c34-881d-7f08b7ac7c12 with path "/bin/mountpoint -q '/media/44af1310-9906-4c34-881d-7f08b7ac7c12'"
    # if status == 1 then alert


    check filesystem fs_media_625a2938-8777-4c24-bf2b-a3edf264e03a with path "/media/625a2938-8777-4c24-bf2b-a3edf264e03a"
    if space usage > OMV_MONIT_SERVICE_FILESYSTEM_SPACEUSAGE for 5 times within 15 cycles
    then alert else if succeeded for 10 cycles then alert
    #check program mp_media_625a2938-8777-4c24-bf2b-a3edf264e03a with path "/bin/mountpoint -q '/media/625a2938-8777-4c24-bf2b-a3edf264e03a'"
    # if status == 1 then alert


    check filesystem fs_media_cbbb91fc-c830-4449-8e86-fd5380bd5b2f with path "/media/cbbb91fc-c830-4449-8e86-fd5380bd5b2f"
    if space usage > OMV_MONIT_SERVICE_FILESYSTEM_SPACEUSAGE for 5 times within 15 cycles
    then alert else if succeeded for 10 cycles then alert
    #check program mp_media_cbbb91fc-c830-4449-8e86-fd5380bd5b2f with path "/bin/mountpoint -q '/media/cbbb91fc-c830-4449-8e86-fd5380bd5b2f'"
    # if status == 1 then alert


    check filesystem fs_media_a4be5e75-5d67-406b-8277-ceeb0f954f8f with path "/media/a4be5e75-5d67-406b-8277-ceeb0f954f8f"
    if space usage > OMV_MONIT_SERVICE_FILESYSTEM_SPACEUSAGE for 5 times within 15 cycles
    then alert else if succeeded for 10 cycles then alert
    #check program mp_media_a4be5e75-5d67-406b-8277-ceeb0f954f8f with path "/bin/mountpoint -q '/media/a4be5e75-5d67-406b-8277-ceeb0f954f8f'"
    # if status == 1 then alert



    now I am getting the following error:
    Failed to execute command 'export LANG=C; monit summary 2>&1': /etc/monit/conf.d/openmediavault-filesystem.conf:3: Error: syntax error 'OMV_MONIT_SERVICE_FILESYSTEM_SPACEUSAGE'


    what should my /etc/monit/conf.d/openmediavault-filesystem.conf look like?

    I fixed it in /etc/default/openmediavault but I think my /etc/monit/conf.d/openmediavault-filesystem.conf file is also strange. If you look at the if space usage > 93OMV_SSL_CERTIFICATE_DIR=/etc/ssl% for 5 times within 15 cycles is that proper?


    # Alert if disk space of root filesystem gets low
    check filesystem rootfs with path /
    if space usage > 93OMV_SSL_CERTIFICATE_DIR=/etc/ssl% for 5 times within 15 cycles
    then alert else if succeeded for 10 cycles then alert


    check filesystem fs_media_44af1310-9906-4c34-881d-7f08b7ac7c12 with path "/media/44af1310-9906-4c34-881d-7f08b7ac7c12"
    if space usage > 93OMV_SSL_CERTIFICATE_DIR=/etc/ssl% for 5 times within 15 cycles
    then alert else if succeeded for 10 cycles then alert
    #check program mp_media_44af1310-9906-4c34-881d-7f08b7ac7c12 with path "/bin/mountpoint -q '/media/44af1310-9906-4c34-881d-7f08b7ac7c12'"
    # if status == 1 then alert


    check filesystem fs_media_625a2938-8777-4c24-bf2b-a3edf264e03a with path "/media/625a2938-8777-4c24-bf2b-a3edf264e03a"
    if space usage > 93OMV_SSL_CERTIFICATE_DIR=/etc/ssl% for 5 times within 15 cycles
    then alert else if succeeded for 10 cycles then alert
    #check program mp_media_625a2938-8777-4c24-bf2b-a3edf264e03a with path "/bin/mountpoint -q '/media/625a2938-8777-4c24-bf2b-a3edf264e03a'"
    # if status == 1 then alert


    check filesystem fs_media_cbbb91fc-c830-4449-8e86-fd5380bd5b2f with path "/media/cbbb91fc-c830-4449-8e86-fd5380bd5b2f"
    if space usage > 93OMV_SSL_CERTIFICATE_DIR=/etc/ssl% for 5 times within 15 cycles
    then alert else if succeeded for 10 cycles then alert
    #check program mp_media_cbbb91fc-c830-4449-8e86-fd5380bd5b2f with path "/bin/mountpoint -q '/media/cbbb91fc-c830-4449-8e86-fd5380bd5b2f'"
    # if status == 1 then alert


    check filesystem fs_media_a4be5e75-5d67-406b-8277-ceeb0f954f8f with path "/media/a4be5e75-5d67-406b-8277-ceeb0f954f8f"
    if space usage > 93OMV_SSL_CERTIFICATE_DIR=/etc/ssl% for 5 times within 15 cycles
    then alert else if succeeded for 10 cycles then alert
    #check program mp_media_a4be5e75-5d67-406b-8277-ceeb0f954f8f with path "/bin/mountpoint -q '/media/a4be5e75-5d67-406b-8277-ceeb0f954f8f'"
    # if status == 1 then alert

    Now it is now letting me make any changes in the web front end. Whenever it says 'the configuration has changed and you must apply changes' when I try and save my changes with the apply button it says applying configuration changes for a min and then I get the error again. Also unser sustem information - performance statistics none of the info is being logged. for instance my cpu usage by hour is not showin

    When connecting to the webGui, I'm getting the following error. I can OK past it and everything seems fine but I don't like errors. Any thoughts?


    Failed to execute command 'export LANG=C; monit summary 2>&1': /etc/monit/conf.d/openmediavault-filesystem.conf:3: Error: syntax error '93OMV_SSL_CERTIFICATE_DIR=/etc/ssl'
    Error #4000:
    exception 'OMVException' with message 'Failed to execute command 'export LANG=C; monit summary 2>&1': /etc/monit/conf.d/openmediavault-filesystem.conf:3: Error: syntax error '93OMV_SSL_CERTIFICATE_DIR=/etc/ssl'' in /usr/share/php/openmediavault/monit.inc:150
    Stack trace:
    #0 /usr/share/openmediavault/engined/module/afp.inc(118): OMVMonit->status('netatalk')
    #1 /usr/share/openmediavault/engined/rpc/services.inc(63): OMVModuleAFP->getStatus()
    #2 [internal function]: OMVRpcServiceServices->getStatus(Array, Array)
    #3 /usr/share/php/openmediavault/rpcservice.inc(125): call_user_func_array(Array, Array)
    #4 /usr/share/php/openmediavault/rpc.inc(79): OMVRpcServiceAbstract->callMethod('getStatus', Array, Array)
    #5 /usr/sbin/omv-engined(500): OMVRpc::exec('Services', 'getStatus', Array, Array, 1)
    #6 {main}

    I'm running 2.1 StoneBurner and the Offical OMV Sensors plugin located here is working for me.
    The plug works but only the CPU temp piece. The fans, system and MB parts are not implemented yet.


    What is different about your plugin then the one located here?

    Also, I found it VERY helpful to have my plex library on a seperate volume. This way if you have to reformat your system drive when you reinstall OMV and the plex plugin all your library and settings will be the same.


    If you save your plex library to your system drive and you have to reformat you lose everything and have to start from scratch.

    The update button will only show if there is an update available.


    I'm running SABnzbd Version: 0.7.20 and version SABnzbd 0.8.0Alpha2 is available so I should be able to update.


    When I connect to my SABnzbd server in the upper left hand corner there is a link that says ⋅ Update Available!

    The SABnzbd plugin will install the latest version, plus when there is an update a button will appear in the plugin page that will auto update to the new version.


    I have the OMV-Extras.ord Testing, Download Managers Testing and Mono Testing all enabled and I have installed the openmediavault-sabnzdb 1.0.6 plug loaded but there is no update button. In the SABnzdb General setting all I have is:


    Enable - Show TabShow tab containing SABnzbd web interface frame.
    HTTPS - Auto enable HTTPS.
    Proxy Pass - Enable this to access via OMV_IP/sabnzbd


    Second version
    Enable - Will create second configuration. Unticking will remove everything.


    Any thoughts on how to make the upgrade button appear?


    I'm running OMV 2.0.12 (Stone burner), openmediavault-omvextrasorg 1.28 and openmediavault-sabnzdb 1.0.6

    A lot of times, you will see two temps - a virtual acpi temp and a coretemp or k10temp. They are usually different. I would trust the coretemp or k10temp more than acpi temp.



    I see that now. Yes I have a k10temp-pci-00c3, fam15h_power-pci-00c4, nouveau-pci-0100, and a nct6776-isa-0290. The k10temp-pci-00c3 seems to match that OMV is reporting.


    Thanks for the info!

    Also, I notice that when I check the plugin it tells me the max is like 38.50 but when I use sensors from the cli it tells me 46.5.


    How ca I verify that it is reporting the proper CPU temp?