Hi
Thanks for first information. Sorry for missing system information, I added them in my signature 
Most important to say is, that I'm using mergerFS over three HDDs.
Today I made another test
- I created a samba share for a single HDD and tried to create/delete a file on this share with my android - Working without problems
- Tried again with the mergerFS sambashare - create/delete a file - Panic/Segfault in samba
Is there a possibility to active debug logging for both services?
Do not look at the Debian package version number. The packaging team is backporting worthwhile patches and fixes from the latest version.
To reinstall use apt-get install --reinstall samba
Hi all
I've the same error (Panic or segfault in Samba) if I try to delete files with my android phone (FX File Commander) on my OMV Nas. Creating files is no problem. I'm using the same account like my windows pc which has no problems.
I'd try to execute apt-get install --reinstall samba, but the same version was installed (Entpacken von samba (2:4.17.12+dfsg-0+deb12u1) über (2:4.17.12+dfsg-0+deb12u1) ...)
Is there another way to update Samba on OMV 7.7.4-1?
Thanks in advance
Now I tested the KVM plugin and it works pretty well with a Debian Buster x64 image.
But the state of the VM won't change after shutting down the vm. Is there something more required inside of the VM?
Yeah, I've seen it.
But as I'm using only two shares its more easy to set the option globally
should this be set to "no"?
or you need to set
allow insecure wide links=yes
The insecure wide links was the missing config.
Now it works.
Thanks for your help!!
I did these steps, but nothing changed 
Maybe you've another idea what could be the problem?
I am also in the process of setting up 1-2 VMs, which I would also like to reach from my local network.
At the moment the basic configuration only works so far that I can reach my network and the internet only from the VM.
I tried with the network settings in Cockpit, but I couldn't get it to work.
If I have understood the summarized correctly, then I must first create a bridge in OMV or the system, which is coupled on the one hand with my network adapter and where I then connect to Cockpit?
But how do I create this?
In OMV I can not set or create a bridge with the network adapter. Here I only see the VETH of my Docker containers.
Would be great if someone could write this together again, what all is necessary
Hi there,
due an required update of OMV4 I installed OMV5 yesterday which seems to work pretty good.
But I can't get my symlinks over two smb shares to work.
In my mind I did all steps from OMV 4but with Windows Explorer I always get an access error.
I inserted following entries into /etc/default/openmediavault and restarted the service
OMV_SAMBA_SHARE_FOLLOWSYMLINKS="yes"
OMV_SAMBA_UNIXEXTENSIONS="yes"
OMV_SAMBA_WIDELINKS="yes"My smb.conf looks like
# This file is auto-generated by openmediavault (https://www.openmediavault.org)
# WARNING: Do not edit this file, your changes will get lost.
#======================= Global Settings =======================
[global]
workgroup = WORKGROUP
server string = %h server
dns proxy = no
log level = 0
log file = /var/log/samba/log.%m
max log size = 1000
logging = syslog
panic action = /usr/share/samba/panic-action %d
encrypt passwords = true
passdb backend = tdbsam
obey pam restrictions = no
unix password sync = no
passwd program = /usr/bin/passwd %u
passwd chat = *Enter\snew\s*\spassword:* %n\n *Retype\snew\s*\spassword:* %n\n *password\supdated\ssuccessfully* .
pam password change = yes
socket options = TCP_NODELAY IPTOS_LOWDELAY
guest account = nobody
load printers = no
disable spoolss = yes
printing = bsd
printcap name = /dev/null
unix extensions = yes
wide links = yes
create mask = 0777
directory mask = 0777
use sendfile = yes
aio read size = 16384
aio write size = 16384
time server = yes
wins support = no
multicast dns register = no
# Special configuration for Apple's Time Machine
fruit:aapl = yes
#======================= Share Definitions =======================
[public]
path = /srv/dev-disk-by-uuid-1195b772-6cfb-4544-a899-fc5801124b5d/public/
guest ok = no
guest only = no
read only = no
browseable = yes
inherit acls = yes
inherit permissions = yes
ea support = no
store dos attributes = no
vfs objects =
printable = no
create mask = 0664
force create mode = 0664
directory mask = 0775
force directory mode = 0775
hide special files = yes
follow symlinks = yes
hide dot files = yes
valid users =
invalid users =
read list =
write list =
follow symlinks = yes
wide links = yes
[public2]
path = /srv/dev-disk-by-uuid-d410d4a3-fb3a-4001-922c-ef914ef53ec9/public2/
guest ok = no
guest only = no
read only = no
browseable = yes
inherit acls = yes
inherit permissions = yes
ea support = no
store dos attributes = no
vfs objects =
printable = no
create mask = 0664
force create mode = 0664
directory mask = 0775
force directory mode = 0775
hide special files = yes
follow symlinks = yes
hide dot files = yes
valid users =
invalid users =
read list =
write list =
follow symlinks = yes
wide links = yesIs there something more required in OMV5 to get this to work?
I know, that this is a possible security issue, but I use OMV only for myself in my local network.
Thanks for your help,
DerDominik
Found the error
After looking in the syslog I got a message, that another shared folder was missing.
I created it manually and then I could remove the shared folder in the admin view
If I understood that correctly, then /sharedfolders/xxx were used in the docker settings of the linked thread.
I just checked that. In my docker settings I use /srv/...
And the problem is also, while I want to create a new shared folder.
Hello,
first I have to say that I am very satisfied with openmediavault. Runs absolutely great!
However, I just have a little problem with the shared folders, especially when adding and deleting them.
As soon as I change something and confirm the change, I get at first the error message:
Failed to execute command 'export PATH=/bin:/sbin:/usr/bin:/usr/sbin:/usr/local/bin:/usr/local/sbin; export LANG=C.UTF-8; systemctl restart 'sharedfolders-omv\x2dbackup.mount' 2>&1' with exit code '1': Assertion failed on job for sharedfolders-omv\x2dbackup.mount.The detailed error message is:
Fehler #0:
OMV\ExecException: Failed to execute command 'export PATH=/bin:/sbin:/usr/bin:/usr/sbin:/usr/local/bin:/usr/local/sbin; export LANG=C.UTF-8; systemctl restart 'sharedfolders-omv\x2dbackup.mount' 2>&1' with exit code '1': Assertion failed on job for sharedfolders-omv\x2dbackup.mount. in /usr/share/php/openmediavault/system/process.inc:182
Stack trace:
#0 /usr/share/php/openmediavault/system/systemctl.inc(86): OMV\System\Process->execute(Array, 1)
#1 /usr/share/php/openmediavault/system/systemctl.inc(160): OMV\System\SystemCtl->exec('restart', NULL, false)
#2 /usr/share/openmediavault/engined/module/sharedfolders.inc(66): OMV\System\SystemCtl->restart()
#3 /usr/share/openmediavault/engined/rpc/config.inc(194): OMVModuleSharedfolders->startService()
#4 [internal function]: OMVRpcServiceConfig->applyChanges(Array, Array)
#5 /usr/share/php/openmediavault/rpc/serviceabstract.inc(123): call_user_func_array(Array, Array)
#6 /usr/share/php/openmediavault/rpc/serviceabstract.inc(149): OMV\Rpc\ServiceAbstract->callMethod('applyChanges', Array, Array)
#7 /usr/share/php/openmediavault/rpc/serviceabstract.inc(565): OMV\Rpc\ServiceAbstract->OMV\Rpc\{closure}('/tmp/bgstatusLo...', '/tmp/bgoutputu8...')
#8 /usr/share/php/openmediavault/rpc/serviceabstract.inc(159): OMV\Rpc\ServiceAbstract->execBgProc(Object(Closure))
#9 /usr/share/openmediavault/engined/rpc/config.inc(213): OMV\Rpc\ServiceAbstract->callMethodBg('applyChanges', Array, Array)
#10 [internal function]: OMVRpcServiceConfig->applyChangesBg(Array, Array)
#11 /usr/share/php/openmediavault/rpc/serviceabstract.inc(123): call_user_func_array(Array, Array)
#12 /usr/share/php/openmediavault/rpc/rpc.inc(86): OMV\Rpc\ServiceAbstract->callMethod('applyChangesBg', Array, Array)
#13 /usr/sbin/omv-engined(537): OMV\Rpc\Rpc::call('Config', 'applyChangesBg', Array, Array, 1)
#14 {main}Does anyone know the problem and how I can fix it?
OMV version -> 4.1.27-1 (Arrakis)
Kernel version -> 4.19.0-0bpo.5-amd64
Many thanks in advance
Hi there,
I'm using OMV for a long time and I'm absolutely satisfied with it.
But at the moment I've sometimes problems with jDownloader. Everything seems to be configured good, but sometimes it isn't working anymore.
Restart via WebUI is not working, so I was looking to the jDownloader directory on the server and...
jDownloader.jar has 0 bytes or soemtimes it is deleted.
OK, I re-uploaded the .jar file from my local install, and it is working for some days.
But it seems, after a self update, the .jar crashes/deletes itself 
Maybe someone has a hint, how to fix it?
Maybe rights on the files/directories? At the moment all is set to jdownloader:users
I don't know, if it is important, but I'm using OMV-4.1.19-1
Thanks for your help