Posts by contr0l

    Hello All,
    Very new to OMV here and Raspberry Pi in general, and just got my first Pi Nas setup with a few external drives, a 4 port USB3.0 hub, an enclosure, and some big flashdrives. (I pooled them all into one 10TB drive pool with the plugin 'Union File System' (MergeFS)) So it's a little over 10tb total and the setup was so much easier than I expected. You guys have simplified an amazing product with a very small footprint. Much Kudos! I've been in IT since 99, but only ever dabbled with linux here and there so I don't know much at all. So every time I get something to work how I want, it's a MAJOR small victory for me, lol. So once I figured this one out and how easy it was to do, I wanted to share this 'How To' for any other noobs out there like myself who want to set a static IP for their Raspberry Pi OMV NAS from their router, not from within OMV.

    I had some issues when I first tried setting a static IP through the OMV WebGUI so I started looking into setting a DHCP Reservation in the router. I have Xfinity (Comcast) home internet and if you ask them or check their forums, they tell you that only the business class modems/routers can even do static IPs. I have told them in the past I do work from home, and I have a 1Gbps down/35Mbps up connection, but I still have the gigabit Home wireless modem/router:
    ( This is the one I have)

    And I wanted to show the process of setting a DHCP Reservation within the Xfinity router for my OMV Nas.

    1. First login to the router in any web browser. For Xfinity (Comcast) the router's default IP is:, so browse to and Login. (Xfinity Router Default Username: admin - Password: password) (I am assuming you know your router login info and have logged in)
    - (For other brands of routers use the IP for your router, and the steps below will be different but should be very similar in terms of looking for the 'DHCP Reservation' section, and the things you need to set.)
    2. Once logged in, click 'Connected Devices' on the left, then click 'Devices'.
    3. This will list all devices connected from your router. Locate the entry for your Raspberry Pi. (I renamed mine to Pi) and click Edit.

    4. It will default to DHCP but when you click the Edit button to the far right of that line (the line with your Pi), you can change it to Reserved and set an IP Address to always be used for that device.

    5. Check 'Reserved IP' and confirm this is the correct MAC address for your device.
    6. Type in the IP Address you want reserved for your Pi, and click Save.

    Give it a few seconds and once it refreshes you can now reboot the Pi to get the new reserved IP, or you can perform the equivalent of a release/renew in Windows, from the Pi's Command Line.

    Access the Command Line Interface (CLI) however you like, i.e. Putty to it, plug in a screen, mouse, and keyboard, or install the ShellInaBox plugin for OMV, etc.. but once you get to the CLI, follow the steps below:

    sudo dhclient -r (The equivalent of release)
    sudo dhclient (The equivalent of renew)

    If you want to specify the adapter name, i.e. wlan1, eth01, etc, then you would do:
    sudo dhclient -v -r eth0
    sudo dhclient -v eth0

    (The -v option shows information on screen about dhcp server and obtained lease.)

    There are various other distro specific methods for doing this:
    There is no need to restart network service. Above commands should work with any Linux distro such as RHEL, Fedora, CentOS, Ubuntu, etc.
    On a related note you can also use the following commands:
    # ifdown eth0
    # ifup eth0

    ### RHEL/CentOS/Fedora specific command ###
    # /etc/init.d/network restart
    ### Debian / Ubuntu Linux specific command ###
    # /etc/init.d/networking restart

    FYI, I didn't have to perform the above last section of commands to release/renew, or more appropriately ifdown eth01 / ifup eth01, because the IP I set the DHCP reservation to was already the IP being used for the Pi from DHCP. So if the last section is incorrect by any means, or can be shortened and made easier, please advise and thanks in advance.
    I personally think it's just easier to reboot the Pi to pull the new IP but I may be wrong about that. Again, I am only a few weeks old in the world of Pi/NAS/OMV.

    Have a good one!

    Very good. That's the ultimate goal and, as the admin, you should have access to all. :) (I'm going to assume you're a Dad or an older brother, so knowing what the youngsters are up to is a very good idea.) But many beginners have very little concept of users and permissions.I'm in the process of writing a permissions addendum to the Getting Started Guide but, as it is with most things, making the topic seem simple, to a broad audience, takes a bit of work.

    Please refer them to the Privileges before the ACLs, lol. (That was a lot easier to setup) I had so many problems until I found that out, lol. And you're assumption was correct; Father of 2 girls.

    This is much like the notions some experienced users may have, when their unconscious biases that make them think that their personal approaches are "very important steps" for beginners when, in fact, they're not.
    (Just a thought. :) )

    I setup multiple user accounts, and assigned users per shares, so the kids could have their own personal folders on the nas. (Sisters cant see each others, but I see all, lol)

    There are a few plugins still listed under Services, even after I've went to Plugins, and uninstalled them and rebooted the Pi.
    I have already Uninstalled these plugins yet they continue to show up Under 'Services' on the left, and they give me a Service error every refresh, reboot, or when you click one of the ones in the services list that has already been uninstalled.
    See attached screenshot.
    All circled in red on the left have been uninstalled but are still listed. And the error on the right is when I clicked one on the left I had already uninstalled.
    Any help is appreciate as I am new to OMV and Pi in general and this is my first stab at it, and so far I am loving OMV running my 10tb NAS!
    Thanks in advance.