Posts by hubertes

hubertes · Oct 6th 2024

Quote from macom

What is the output of
grep -rlI "backports" /etc/apt/ 2>/dev/null

nothing

hubertes · Oct 6th 2024

yes

you red i'm on Rpi, right ? I think I did never enable backport though

hubertes · Oct 6th 2024

Quote

sudo apt-get update
Err:7 http://security.debian.org/debian-security bullseye-security InRelease
The following signatures couldn't be verified because the public key is not available: NO_PUBKEY 112695A0E562B32A NO_PUBKEY 54404762BBB6E853
Err:7 http://security.debian.org/debian-security bullseye-security InRelease

The following signatures couldn't be verified because the public key is not available: NO_PUBKEY 112695A0E562B32A NO_PUBKEY 54404762BBB6E853

hubertes · Oct 6th 2024

I have to reinstall all my docker, portainer etc .. did not made a safe and now it has an error

Quote

Comment: An error was encountered while installing package(s): W: GPG error: http://httpredir.debian.org/debian bullseye-backports InRelease: The following signatures couldn't be verified because the public key is not available: NO_PUBKEY
E: The repository 'http://httpredir.debian.org/debian bullseye-backports InRelease' is not signed.

I think this is due to my 32/64 pi installed version ? No time for this on my sunday evening :sad: crying:

hubertes · Oct 6th 2024

Hi, I think I had 6.3 os so. could I go back to 6.3, no time for now to setup all my volume in docker again.

Thanks !

(edit this one in on rasp^pberry pi 2 v1.1)

hubertes · Jan 22nd 2023

Sorry, but I didn't remember to erase the <fstab> tag, I don't think I did though. Sorry again.

hubertes · Jan 22nd 2023

I think I did delete the mnt section where this usb disk was (because it's not ever attach), yes I know it was dumb. No reversion possible.

Clean install hten ? How ?

EDIT : OMG I just dont' know but config.xml was without <fstab> tag. Repaired. Thanks

hubertes · Jan 22nd 2023

Yes I did

hubertes · Jan 22nd 2023

Sure I hear.

The thing is I did try with a classic thumb drive and I have the same error. Everything worked fine till last week, by the way, with an exfat drive till I realized that file permissions were a mess with docker. I did changed to ext4, then messed up with fstab, then I don't know.... Now here I am with those errors.

I said that USB has always a voltage of 5V. I have a good power supply attach to my Rpi2 though(I know I don't have to expect much performance). Since this disk is in USB3 mode, I think it drained to much current, and then the voltage drops (maybe I'm wrong but I have some electronic notions).

hubertes · Jan 22nd 2023

Thanks, the total amount of current delivered by those USHB ports should be ok.

I have the same error when I plug a usb flash drive

Code

Failed to execute XPath query '//system/fstab'.

OMV\Config\DatabaseException: Failed to execute XPath query '//system/fstab'. in /usr/share/php/openmediavault/config/database.inc:262
Stack trace:
#0 /usr/share/openmediavault/engined/rpc/fstab.inc(132): OMV\Config\Database->set(Object(OMV\Config\ConfigObject))
#1 [internal function]: Engined\Rpc\FsTab->set(Array, Array)
#2 /usr/share/php/openmediavault/rpc/serviceabstract.inc(123): call_user_func_array(Array, Array)
#3 /usr/share/php/openmediavault/rpc/rpc.inc(86): OMV\Rpc\ServiceAbstract->callMethod('set', Array, Array)
#4 /usr/share/openmediavault/engined/rpc/filesystemmgmt.inc(811): OMV\Rpc\Rpc::call('FsTab', 'set', Array, Array)
#5 [internal function]: Engined\Rpc\OMVRpcServiceFileSystemMgmt->setMountPoint(Array, Array)
#6 /usr/share/php/openmediavault/rpc/serviceabstract.inc(123): call_user_func_array(Array, Array)
#7 /usr/share/php/openmediavault/rpc/rpc.inc(86): OMV\Rpc\ServiceAbstract->callMethod('setMountPoint', Array, Array)
#8 /usr/sbin/omv-engined(537): OMV\Rpc\Rpc::call('FileSystemMgmt', 'setMountPoint', Array, Array, 1)
#9 {main}

Display More

Any hint to rester config.xml ? or have a clean fresh install ?

thanks

hubertes · Jan 22nd 2023

Thks

If nothing work I'll try to reinstall all my sytem ! what is the best way ?

Code

[   16.091166] vc4-drm soc:gpu: bound 3f206000.pixelvalve (ops vc4_crtc_ops [vc4])
[   16.091991] vc4-drm soc:gpu: bound 3f207000.pixelvalve (ops vc4_crtc_ops [vc4])
[   16.092742] vc4-drm soc:gpu: bound 3f807000.pixelvalve (ops vc4_crtc_ops [vc4])
[   16.093376] vc4-drm soc:gpu: bound 3fc00000.v3d (ops vc4_v3d_ops [vc4])
[   16.107072] [drm] Initialized vc4 0.0.0 20140616 for soc:gpu on minor 0
[   16.107963] vc4-drm soc:gpu: [drm] Cannot find any crtc or sizes
[   16.199980] smsc95xx 1-1.1:1.0 eth0: hardware isn't capable of remote wakeup
[   16.352407] smsc95xx 1-1.1:1.0 eth0: Link is Down
[   17.049891] hwmon hwmon1: Undervoltage detected!
[   18.571472] smsc95xx 1-1.1:1.0 eth0: Link is Up - 100Mbps/Full - flow control off
[   18.571644] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[   23.289861] hwmon hwmon1: Voltage normalised
[   26.730292] vc4-drm soc:gpu: [drm] Cannot find any crtc or sizes
[   31.609844] hwmon hwmon1: Undervoltage detected!
[   35.049760] cam-dummy-reg: disabling
[   35.769859] hwmon hwmon1: Voltage normalised
[   39.375636] 8021q: 802.1Q VLAN Support v1.8
[   39.709902] Adding 102396k swap on /var/swap.  Priority:-2 extents:1 across:102396k SSFS
[   39.958180] cfg80211: Loading compiled-in X.509 certificates for regulatory database
[   40.135585] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[   40.177792] cfg80211: loaded regulatory.db is malformed or signature is missing/invalid
[   40.841340] ICMPv6: process `dhcpcd' is using deprecated sysctl (syscall) net.ipv6.neigh.eth0.retrans_time - use net.ipv6.neigh.eth0.retrans_time_ms instead
[   50.020445] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this.
[   50.039440] Bridge firewalling registered
[   54.493026] docker0: port 1(veth6893b4e) entered blocking state
[   54.493079] docker0: port 1(veth6893b4e) entered disabled state
[   54.494755] device veth6893b4e entered promiscuous mode
[   54.683885] IPv6: ADDRCONF(NETDEV_CHANGE): veth15b08c7: link becomes ready
[   54.684336] IPv6: ADDRCONF(NETDEV_CHANGE): veth6893b4e: link becomes ready
[   54.684662] docker0: port 1(veth6893b4e) entered blocking state
[   54.684700] docker0: port 1(veth6893b4e) entered forwarding state
[   54.685108] IPv6: ADDRCONF(NETDEV_CHANGE): docker0: link becomes ready
[   57.471228] docker0: port 1(veth6893b4e) entered disabled state
[   57.476567] eth0: renamed from veth15b08c7
[   57.513403] docker0: port 1(veth6893b4e) entered blocking state
[   57.513450] docker0: port 1(veth6893b4e) entered forwarding state
[   62.810017] hwmon hwmon1: Undervoltage detected!
[   69.050065] hwmon hwmon1: Voltage normalised
[  216.730358] hwmon hwmon1: Undervoltage detected!
[  229.210396] hwmon hwmon1: Voltage normalised

Display More

hubertes · Jan 22nd 2023

Oh I did't knew there is more in the bell Sorry

Code

Failed to execute XPath query '//system/fstab'.

OMV\Config\DatabaseException: Failed to execute XPath query '//system/fstab'. in /usr/share/php/openmediavault/config/database.inc:262
Stack trace:
#0 /usr/share/openmediavault/engined/rpc/fstab.inc(132): OMV\Config\Database->set(Object(OMV\Config\ConfigObject))
#1 [internal function]: Engined\Rpc\FsTab->set(Array, Array)
#2 /usr/share/php/openmediavault/rpc/serviceabstract.inc(123): call_user_func_array(Array, Array)
#3 /usr/share/php/openmediavault/rpc/rpc.inc(86): OMV\Rpc\ServiceAbstract->callMethod('set', Array, Array)
#4 /usr/share/openmediavault/engined/rpc/filesystemmgmt.inc(811): OMV\Rpc\Rpc::call('FsTab', 'set', Array, Array)
#5 [internal function]: Engined\Rpc\OMVRpcServiceFileSystemMgmt->setMountPoint(Array, Array)
#6 /usr/share/php/openmediavault/rpc/serviceabstract.inc(123): call_user_func_array(Array, Array)
#7 /usr/share/php/openmediavault/rpc/rpc.inc(86): OMV\Rpc\ServiceAbstract->callMethod('setMountPoint', Array, Array)
#8 /usr/sbin/omv-engined(537): OMV\Rpc\Rpc::call('FileSystemMgmt', 'setMountPoint', Array, Array, 1)
#9 {main}

Display More

sudo mount /dev/sda1 /mnt --> ok (but no file system to mount on webgui)

sudo umount /dev/sda1 --> ok (file system in webgui but same error)

Thanks again

hubertes · Jan 22nd 2023

Ok, sorry, any hint to correct the error ? Do you need other infos ?

Thanks

hubertes · Jan 21st 2023

1. https://maxtor.seagate.com/fil…9_1_1512US_M3Portable.pdf

2. Rpi 2 model B

3. Linux raspberrypi 5.15.84-v7+ #1613 SMP Thu Jan 5 11:59:48 GMT 2023 armv7l GNU/Linux

Can't use the code box when there is to much caracters

hubertes · Jan 21st 2023

Quote from macom

Please post the complete error message you get?

Thanks

The one I wrote in the previous message. It's when I try to add a file system in the webGUI. Nothing special in syslog

Code

500 - Internal Server Error
Failed to execute XPath query '//system/fstab'.

config.xml : https://pastebin.com/n8yhUE0D

hubertes · Jan 21st 2023

Hi, I have this error with a M3 Usb3 external drive on a RPi 3

Code

500 - Internal Server Error
Failed to execute XPath query '//system/fstab'.

Any idea ? Disk is there on the webgui though

Code

blkid
/dev/mmcblk0p1: LABEL_FATBOOT="boot" LABEL="boot" UUID="AE82-4BC1" BLOCK_SIZE="512" TYPE="vfat" PARTUUID="c9105ecc-01"
/dev/mmcblk0p2: LABEL="rootfs" UUID="6d2ff93e-eacd-415c-96d5-4611ad21e05f" BLOCK_SIZE="4096" TYPE="ext4" PARTUUID="c9105ecc-02"
/dev/sda1: LABEL="HARDPI" UUID="0da70cce-f234-4acc-96c9-fe45b486763b" BLOCK_SIZE="4096" TYPE="ext4" PARTUUID="365df5b8-01"

Code

cat /etc/fstab
proc            /proc           proc    defaults          0       0
PARTUUID=c9105ecc-01  /boot           vfat    defaults          0       2
PARTUUID=c9105ecc-02            /       ext4    noatime,nodiratime,defaults     0 1
# a swapfile is not a swap partition, no line here
#   use  dphys-swapfile


# a swapfile is not a swap partition, no line here
#   use  dphys-swapfile swap[on|off]  for that
# >>> [openmediavault]
# <<< [openmediavault]

Display More

mount : https://pastebin.com/p63VVaRn

hubertes · Mar 27th 2020

to n00B for this

hubertes · Mar 23rd 2020

no clue how I could format the space ? I can't modify this share name

hubertes · Mar 22nd 2020

Refering to : Remote Mount Plugin OMV3 fails to mount folders with Spaces

I tried to mount a remote share with a space character "Disque dur", I tried everything I could, having errors in all cases. even with "\\\\040"

hubertes · Jan 19th 2020

Used ther kernel option, reboot once with the iso on boot

grub :

Code

set isofile="/boot/gpartedxxxxxx.iso"
loopback loop $isofile
linux (loop)/live/vmlinux boot='live' union='overlay' ......
initrd (loop)/live/initrd.img

Posts by hubertes

[Solved] RPi 32 bits, docker and portainer (no Rollback from 6.9 to ???)

[Solved] RPi 32 bits, docker and portainer (no Rollback from 6.9 to ???)

[Solved] RPi 32 bits, docker and portainer (no Rollback from 6.9 to ???)

[Solved] RPi 32 bits, docker and portainer (no Rollback from 6.9 to ???)

[Solved] RPi 32 bits, docker and portainer (no Rollback from 6.9 to ???)

[Resolved]Problem with Rpi, fstab and config.xml

[Resolved]Problem with Rpi, fstab and config.xml

[Resolved]Problem with Rpi, fstab and config.xml

[Resolved]Problem with Rpi, fstab and config.xml

[Resolved]Problem with Rpi, fstab and config.xml

[Resolved]Problem with Rpi, fstab and config.xml

[Resolved]Problem with Rpi, fstab and config.xml

[Resolved]Problem with Rpi, fstab and config.xml

[Resolved]Problem with Rpi, fstab and config.xml

[Resolved]Problem with Rpi, fstab and config.xml

[Resolved]Problem with Rpi, fstab and config.xml

Remote Mount Plugin OMV5 fails to mount folders with Spaces

Remote Mount Plugin OMV5 fails to mount folders with Spaces

Remote Mount Plugin OMV5 fails to mount folders with Spaces

gparted, systemrescueCD error on boot