Hello,
here is more information
********************************
Bonjour,
voici plus d'information
---------------------------------------------------------
cat /proc/mdstat
=
Personalities : [raid10]
unused devices: <none>
--------------------------------------------------------
blkid
=
-dash: 2: blkid: not found
-------------------------------------------------------
fdisk -l | grep "Disk "
=
-dash: 3: fdisk: not found
------------------------------------------------------
cat /etc/mdadm/mdadm.conf
# mdadm.conf
#
# Please refer to mdadm.conf(5) for information about this file.
#
# by default, scan all partitions (/proc/partitions) for MD superblocks.
# alternatively, specify devices to scan, using wildcards if desired.
# Note, if no DEVICE line is present, then "DEVICE partitions" is assumed.
# To avoid the auto-assembly of RAID devices a pattern that CAN'T match is
# used if no RAID devices are configured.
DEVICE partitions
# auto-create devices with Debian standard permissions
CREATE owner=root group=disk mode=0660 auto=yes
# automatically tag new arrays as belonging to the local system
HOMEHOST <system>
# definitions of existing MD arrays
ARRAY /dev/md/Raid10 metadata=1.2 spares=1 name=TLC-NAS-OMV:Raid10 UUID=0d6d4bc1:dfa41e74:f351c0c2:32df8c5c
---------------------------------------------------
6 hard drives of 931Go mounted in raid 10 // 6 disques dur de 931Go monté en raid 10
---------------------------------------------------
following the loss of a hard disk (faulty sata connector) stop then reboot the raid do not know to go up.
//
suite a la perte d'un disque dur (connecteur sata défectueux) arrêt puis redémarrage le raid ne sais pas remonter.
---------------------------------------------------
if a person can help me // si une personne peut m'aider
original discs are set aside and discs (certified copy) are installed to prevent data loss
//
les disques originaux sont mis de coté et des disque (copie conforme) sont installer pour éviter toute perte de data
cordially
//
Cordialement