Posts by fenrisulf

    is there anything that could cause it not to recognise at the hardware level?

    The card use to work fine but i guess its possible I've fried it with static while rebuilding.

    I've removed it a couple of times and tried it in different PCIe slots, still nothing.

    If there's nothing else anyone can think of I'll try it in a friends server and see if it recognises in one of his.

    Hi all

    So I've been playing with OMV for the last couple of weeks.

    1 issue I'm having is with my network card.

    My motherboard has a built in LAN port which works fine however I'd like to get my dual NIC card working so i can aggregate the link.

    The interfaces that get brought from up "ip -a" in SSH are confusing me:

    1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN group default qlen 1000

    link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00

    inet ******** scope host lo

    valid_lft forever preferred_lft forever

    inet6 ::1/128 scope host

    valid_lft forever preferred_lft forever

    2: enp3s0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP group default qlen 1000

    link/ether ********* brd ff:ff:ff:ff:ff:ff

    inet 192.168.1.50/24 brd 192.168.1.255 scope global dynamic enp3s0

    valid_lft 85414sec preferred_lft 85414sec

    3: docker0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue state UP group default

    link/ether ********** brd ff:ff:ff:ff:ff:ff

    inet ********** brd 172.17.255.255 scope global docker0

    valid_lft forever preferred_lft forever

    inet6 *************scope link

    valid_lft forever preferred_lft forever

    4: br-d0f2a4111581: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc noqueue state DOWN group default

    link/ether ************ brd ff:ff:ff:ff:ff:ff

    inet ********** brd *********** scope global br-d0f2a4111581

    valid_lft forever preferred_lft forever

    6: veth05f66c4@if5: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue master docker0 state UP group default

    link/ether *********** brd ff:ff:ff:ff:ff:ff link-netnsid 1

    inet6 **************scope link

    valid_lft forever preferred_lft forever

    8: veth022f992@if7: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue master docker0 state UP group default

    link/ether ************ brd ff:ff:ff:ff:ff:ff link-netnsid 0

    inet6 f************** scope link

    valid_lft forever preferred_lft forever


    If i do a "LSPCI" it is not showing my card, only the inbuilt:

    00:00.0 Host bridge: Intel Corporation 82G33/G31/P35/P31 Express DRAM Controller (rev 02)

    00:1a.0 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #4 (rev 02)

    00:1a.1 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #5 (rev 02)

    00:1a.2 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #6 (rev 02)

    00:1a.7 USB controller: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #2 (rev 02)

    00:1b.0 Audio device: Intel Corporation 82801I (ICH9 Family) HD Audio Controller (rev 02)

    00:1c.0 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 1 (rev 02)

    00:1c.3 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 4 (rev 02)

    00:1c.4 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 5 (rev 02)

    00:1d.0 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #1 (rev 02)

    00:1d.1 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #2 (rev 02)

    00:1d.2 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #3 (rev 02)

    00:1d.7 USB controller: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #1 (rev 02)

    00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev 92)

    00:1f.0 ISA bridge: Intel Corporation 82801IR (ICH9R) LPC Interface Controller (rev 02)

    00:1f.2 IDE interface: Intel Corporation 82801IR/IO/IH (ICH9R/DO/DH) 4 port SATA Controller [IDE mode] (rev 02)

    00:1f.3 SMBus: Intel Corporation 82801I (ICH9 Family) SMBus Controller (rev 02)

    00:1f.5 IDE interface: Intel Corporation 82801I (ICH9 Family) 2 port SATA Controller [IDE mode] (rev 02)

    02:00.0 SATA controller: JMicron Technology Corp. JMB363 SATA/IDE Controller (rev 02)

    02:00.1 IDE interface: JMicron Technology Corp. JMB363 SATA/IDE Controller (rev 02)

    03:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller (rev 01)


    Any ideas?

    I've installed OMV extras and done the proxmox kernal updates.